This LP-E12 Dummy Battery with USB Type-C Connector Kit from Bescor works with Canon cameras that use an LP-E12 battery. The dummy battery comes with a USB Type-C connector and cord. The device has external voltage regulation.

USB Type-A Converter    Dummy Battery for USB Type-C Power Port    Battery and Charger Included    For Use with Select Canon Cameras

Related Questions and Answers

Q: 1. Is this compatible with the Panasonic GH6? The dummy battery in the picture is NOT the blk22.

A: Bescor has not listed yet what is compatible with the Bescor Panasonic Style DMWBK22 Dummy Battery with USB-C Input Connector Kit. Technically it should.

Q: 2. Will this work with the canon m50 mirrorless camera?

A: Yes it will as the M50 uses Canon LP-E12 style batteries.

Q: 3. I've tried the GV-USB-LPE12 with a few different power sources but no combination works with my Canon M200. Is there a specific input power requirement? I've tried 5V 2A as well as 9V 1.67A

A: Dear John, Usually complains like this are related to insufficient power provided to the adapter cable. You camera is required certain level of current to function properly. To provide that at least 2.0 Amp USB power source has to be used for the adapter cable. Usually computer USB ports are limited to 1.o Amp. The power banks and USB power supplies if not specified are usually providing 1.0 Amp outputs. You need to used power source with SPECIFIED 2.0 Amp output from reliable manufacturer for adapter to function properly. Please check specifications of the power source your are planning to use with this cable. Recommended GyroVu power banks: GV-PB-301 https://www.gyrovu.com/product-page/high-capacity-30-000-mah-power-bank GV-PBID-401 https://www.gyrovu.com/product-page/high-capacity-40-000-mah-power-bank-with-110v-inverter In case if you will not able to make it working properly we can provide you with RMA ## for return.

Q: 4. does this need a battery adapter plate? or can i use it by itself?

A: This requires a battery adapter plate if you're using it for a camera battery. It comes with the plate for the LP-E12, and you can swap that piece out down the road for other battery plates.

Q: 5. If I don't have a D-Tap Source, Can I solder in a good 12v or 5v adapter on the D-Tap End and use this to power my camera directly for the wall?

A: We are not aware of that being possible with this product.

Q: 6. Will this work with the RP model?

A: No, the GyroVu D-Tap to Canon LP-E12 Dummy Battery (30") is not compatible with the Canon EOS RP. We recommend using the GyroVu D-Tap to Canon LP-E17 Dummy Battery (30")(BH #GYVDTAPLPE17) instead. See: https://bit.ly/3SWrdC4

Q: 7. I have a Canon Rebel SL1 that uses a 7.2V LP-E12 battery. Is that compatible too?

A: Yes, this will charge your battery.

Q: 8. I understand there are power bricks that work well but is there a recommend USB-C AC power supply that I can plug into the wall?

A: This Xcellon would work well: https://bhpho.to/3IhQiVF

Q: 9. Is this product compatible with the "Canon EOS M200 Mirrorless Digital Camera with 15-45mm Lens"?

A: Yes, it will, since Canon EOS M200 will for with LP-E12 battery.

Q: 10. What is the Volts and Amperage outputs? Looking for something between 7.2-7.6 Volts and 2-3 Amperage

A: The Bescor Sony NP-FW50 Dummy Battery with USB Type-C Connector will output 7.2V at 1.02 amps.