This LP-E12 Dummy Battery with USB Type-C Connector Kit from Bescor works with Canon cameras that use an LP-E12 battery. The dummy battery comes with a USB Type-C connector and cord. The device has external voltage regulation.

For Select Canon Cameras    USB-Type A and D-Tap Converter    Dummy Battery for USB Type-C Power Port    Battery and Charger

Related Questions and Answers

Q: 1. does this need a battery adapter plate? or can i use it by itself?

A: This requires a battery adapter plate if you're using it for a camera battery. It comes with the plate for the LP-E12, and you can swap that piece out down the road for other battery plates.

Q: 2. Will this work with the RP model?

A: No, the GyroVu D-Tap to Canon LP-E12 Dummy Battery (30") is not compatible with the Canon EOS RP. We recommend using the GyroVu D-Tap to Canon LP-E17 Dummy Battery (30")(BH #GYVDTAPLPE17) instead. See: https://bit.ly/3SWrdC4

Q: 3. I've tried the GV-USB-LPE12 with a few different power sources but no combination works with my Canon M200. Is there a specific input power requirement? I've tried 5V 2A as well as 9V 1.67A

A: Dear John, Usually complains like this are related to insufficient power provided to the adapter cable. You camera is required certain level of current to function properly. To provide that at least 2.0 Amp USB power source has to be used for the adapter cable. Usually computer USB ports are limited to 1.o Amp. The power banks and USB power supplies if not specified are usually providing 1.0 Amp outputs. You need to used power source with SPECIFIED 2.0 Amp output from reliable manufacturer for adapter to function properly. Please check specifications of the power source your are planning to use with this cable. Recommended GyroVu power banks: GV-PB-301 https://www.gyrovu.com/product-page/high-capacity-30-000-mah-power-bank GV-PBID-401 https://www.gyrovu.com/product-page/high-capacity-40-000-mah-power-bank-with-110v-inverter In case if you will not able to make it working properly we can provide you with RMA ## for return.

Q: 4. Can you power the charger via usb? Or just charge from the unit via usb?

A: The USB port only provides power to other devices, it cannot be used to power the charging unit.

Q: 5. WIll this work on a NIkon D750 connecting it to a USB-C power bank, such as Anchor? Does it step up the 5 v power to 7 volt?

A: The Bescor EN-EL15/EP-5B Dummy Battery with USB Type-C Connector Kit is compatible with the D750, using a USB power bank.

Q: 6. I have a Canon Rebel SL1 that uses a 7.2V LP-E12 battery. Is that compatible too?

A: Yes, this will charge your battery.

Q: 7. Will this work with the canon m50? I need the battery door to be closed though.

A: The GyroVu D-Tap to Canon LP-E12 Dummy Battery (30") will work with the Canon M50, but it would require that the battery door remain open or be removed entirely. Unfortunately since the M50 doesn't have a power input, using a dummy battery and keeping the battery door open is the only way to power the camera with an external power source.

Q: 8. Will this allow my camera to run while it's plugged in? I'm looking to leave it charging while I'm streaming

A: The GyroVu USB to Canon LP-E12 Dummy Battery Cable (40") doesn't charge the camera whatsoever, it is meant to power not charge, externally.

Q: 9. Will this fit the back of an Atomos Shinobi?

A: The Bescor Sony Style NPFW50 is not compatible with an Atomos Shinobi. It requires an NP-F770 Battery

Q: 10. Will you be able to close the door to the battery compartment of the gh6 with this kit?

A: The battery door for the Panasonic GH6 would not close when using this Bescor DMW-BLK22 Kit.