Add flexibility to your workspace with this Monitor Desk Mount from K&M. Designed for a single display up to 32" in size, this mount clamps to almost any table or desk up to 3.4" thick. When attached to the VESA plate, you gain the freedom of smoothly moving your monitor up and down, and side to side, thanks to the integrated gas spring. The mounting plate itself offers additional adjustments with the ability to swivel 180° and tilt 175°.

For a Single Display Up to 32" In Size    Clamps to Desks/Tables Up to 3.4" Thick    Supports VESA 75mm & 100mm Patterns    Built-In Gas Spring for Smooth Movement    Integrated Cable Management    Height Adjustable via Post & Arm    180° Swivel & 175° Tilt    Durable Aluminum Construction

• Supports VESA 75mm and 100mm hole patterns
• Up to 7.9" of height adjustment via the main post
• Up to 13.8" of height adjustment via the hinged arm
• Integrated cable management
• Maximum load capacity of 17.6 lb
• Durable aluminum construction

Related Questions and Answers

Q: 1. My desk is about 1 mm too wide for the C-Clamp at its widest. I can't drill a hole to use the grommet alternative. Are there any alternatives for something to mount the arm on of this particular product?

A: The maximum on the clamp is 2.4", which is significantly wide. The only thing that may be possible is to remove and/ or replace the plate, while still maintaining integrity and safety and protection of desk underside.

Q: 2. Will this work with a Mac 27 Cinema monitor? If you don't have a Mac monitor, please don't speculate.

A: It will work, but be very careful when buying the Vesa Mount. the screws are very cheap and will break. its kinda sad, but make sure apple is responsible if your monitor fails at all, the screws are very cheap. Good Luck, it will owrk, but make sure you get better screws or trust apples screws that come with the Vesa Mount

Q: 3. Is there a video on how to install the mount? I am not quite understanding the printed instructions.

A: The Mount-It! Vertical Dual-Monitor Desk Mount for 13 to 32" Displays (BH # MOMI1768) will clamp to the desk or tabletop. Install the included mounting plates to the monitors and then slide the monitors into place onto the monitor holders attached to the vertical pole.

Q: 4. Is it possible to rotate (pivot) the monitor 90 degrees from horizontal to a vertical position?

A: Yes, it rotates, for horizontal or vertical use.

Q: 5. Please explain the note 9 inch extension available ??

A: This means you can get a further 9 extension if you add the following arm.

Q: 6. Can this be mounted by screwing it into the desktop? (Actually, it is a kitchen countertop with a back lip - so I cannot use a clamp.) Thank you!

A: It can not be screwed in. It is a table top clamp.

Q: 7. Can you adjust 2 monitors in a stacked method (top and bottom)?

A: Depending on the size of the monitors you might be able to. There are mounts specifically made for this style mounting.

Q: 8. Can it be configured to have only one arm attached to the base?

A: Mount-It! Dual-Monitor Desk Mount for Displays up to 32" (Black) BH #MOMI1772B • MFR #MI-1772B is designed for both arms to be connected and operational.

Q: 9. Has anyone attached a 27inch NEC to this ?

A: No we have not but bear in mind: Load Capacity 25 lb / 11.3 kg Mounting-Hole Pattern 75 x 75 to 100 x 100 mm Orientation Landscape, Portrait Supported Grommet Size Width: 0.31 to 2" / 8 to 50.8 mm Depth: 3" / 76.2 mm Desk Clamp Compatibility 0.4 to 2.4" / 10 to 60 mm Contact Ergotron directly for mounting your specific monitor: Ergotron; Tel: 800-888-8458 Email: customerservice@ergotron.com

Q: 10. Will this support the Cintiq 27QHD?

A: Short answer - No. As previously stated regarding Macs, the way this connects is with a plate and screws. I have the smaller Cintiq (not the 27) and it does not have the appropriate connection. I doubt the 27 does either. This is made specifically for monitors that have the VESA mount.