The Adapter for Miranda Lens to Sony NEX Mount Camera from FotodioX allows a Miranda lens to attach to a Sony NEX camera body. Adapting a larger format lens to a smaller format sensor provides optical as well as practical advantages. The smaller image field helps minimize the effects of lens distortion and aberration by using the center or "sweet spot" of the larger lens' image circle, thus providing edge-to-edge sharpness.

Although the lens will fit physically, automatic diaphragm, auto-focusing, or other electronic functions will not operate correctly while using this adapter. Manual or aperture priority mode must be used when this adapter is attached. Its all-metal design and polished surface provide smooth mounting and long lasting performance.

Adapts Miranda Lens to Sony NEX Camera Body

Built-in aperture controller

The leaf spring design in the adapter holds the lens tight to the camera body ensuring there is no play between the camera and the lens.

Infinity Focus Guaranteed

All-metal design; brass with stainless steel finishing

Related Questions and Answers

Q: 1. Compatibility Sony 6000 alpha camera with Olympus lens Zuico Digital 50-200mm, 1:2,8-3,5?

A: This is for the older OM 1 manual lenses. No electrical contacts and I believe the mount is different as well.

Q: 2. Hello , is for sony a7III connect lens hasselblad cf ?

A: Hi there. Yes it is. Just be careful as the release switch is in the same spot that you rest your hand to adjust focus. I actually dropped my lens off a roof and onto a pebbles because I released it as I was adjusting my focus. Luckily only minor damage to the casing of the lens but could have been much worse. Its very affective, though, so recommend it.

Q: 3. What does this weigh (obviously less than package weight)?

A: According to the manufacturer, the FotodioX Adapter for Hasselblad V Lens to Sony NEX Mount Camera weighs 0.47 lb (214g).

Q: 4. Can you give me (LxWxH) for this adapter ? Because box dimensions doesn't help and are totally useless. Thanks.

A: It appears to be 6 centimeters or 2 3/8 inches wide and the release tab projects out 3/16. Since it is a circle, it's the same in all directions. It is 9/16 of an inch thick or 1.5 centimeters. Of the several models available it doesn't look as attractive as, say, Novoflex--but it costs less and does the job just fine.

Q: 5. M42 to e mount adapter?

A: No, this is not the M42 screw mount.

Q: 6. Does this Exakta lens adapter work with the Sony a7rii full-frame?

A: It works great on my A7 camera.

Q: 7. Does this adapter work with Hasselblad H Lenses. I have the full set for my H5D, will they work?

A: Yes, the adapter works a treat. I have been using my Sonnar f4 150 with the adapter and the results are stunning.

Q: 8. Hi, Any ideas if this will fit a MIRANDA 24mm f2.8 for an old Olympus? (to a Nikon D90 camera)I have tried a simple Nikon to OM adapter ring, and it has the wrong screw hole spacing and no recess in the collar for the lens removal trigger.

A: No, that adapter is not compatible with the D90.

Q: 9. I bought this adapter. It came without any instructions about how to mount the Hasselblad lenses. The mounting of Hasselblad lenses to Hasselblad cameras must be done in a certain way. They must be cocked before removing them and so forth, or a jam can occur. So what is the order of mounting and how does it behave with the Sony camera? I do not wish to jam the lens and or camera and some directions for using this are really needed. In the absence of instructions, I may need to return it.Thank you.

A: A Hasselblad lens (with a leaf shutter) cannot be safely removed or reattached without being cocked . In this state, the leaf shutter is open for focusing or in this case photographing on a mirrorless camera. While the adapter does not require the shutter being cocked, you will need it in this state to shoot with and remount back onto a Hasselblad body without risking jamming. Use of this adapter will not trip the shutter on the Hasselblad lens as you are using the shutter in-camera to make an exposure.

Q: 10. Does it work with other e-mount cameras, such as sony alpha a6000?

A: Yes, it works with all e-mount.