Smaller than most smartphones, the NOCO Genius1 1A Battery Charger will charge 6V or 12V automotive, marine, and deep-cycle batteries, even batteries so dead they register zero volts. Simply plug in to an AC outlet, attach the clamps or terminal rings to any flooded, gel, AGM, maintenance-free, or lithium-ion battery, and press the button. The Genius1 will check the temperature and tailor the current to eliminate overcharging in hot climates and under-charging in cold climates. Normal charging works on batteries depleted as low as one volt, but Force Mode allows you to manually begin recharging batteries down to zero. Built-in diagnostics check for overcharge, shorts/damage, and reversed polarity. Finally, the Genius1 can detect sulfation or acid stratification that impair the battery's performance and repair the damage. The battery terminal clamps have a compact, needle-nose design for ease of use in crowded engine compartments. Terminal rings are built into the clamps and easily detached for a semi-permanent connection to the battery.

Charges 6V & 12V Batteries    Charge Batteries down to Zero Volts    Uses AC Power    Works with Various Battery Chemistries    Restores Sulfated/Stratified Batteries    Thermal Compensation for Correct Charge    Needle-Nose Clamps, Detachable Eyelets    Fully Automatic

• Use for 6V and 12V lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus li-ion batteries
• Simple to use, just plug in to AC power, connect to the battery, select a charge mode, and start charging
• Thermal sensor detects ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates
• Charges dead batteries down to one volt with standard charging or zero volts with manual Force Mode
• Detects sulfation and acid stratification and restores lost performance for stronger engine starts and extended battery life
• Compact needle-nose alligator clips with integrated terminal rings

Related Questions and Answers

Q: 1. Is this compatible with bowens XMT battery BW-5565?

A: The charger for Bowens needs to have these specs; Nominal charging voltage 11.1/12.6v -Charging current max 4.1 amps, this is the specs for the charger you need.

Q: 2. NOCO Genius 10- Does this have to be :ugged into power or Does this charger, fully charged, left installed on vehicle for 2 months with OUT being plugged into the wall power??

A: The NOCO Genius2D 2-Amp Direct-Mount 12V Battery Charger & Maintainer BH #NOGENIUS2D • MFR #GENIUS 2D Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates. Charge dead batteries - Charge batteries as low as 1-volt, including flooded, gel, and AGM, as well as automotive, marine, and deep-cycle batteries. Beyond maintenance - It's not a trickle charger, it's an advanced battery maintainer. It monitors your battery 24/7, providing intuitive and safe maintenance charging with zero overcharge. A fully-automatic, worry-free battery charger for year-round use. Restore your battery - Automatically detects battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.

Q: 3. Is this manufactured by Nikon (MH-32)?

A: Yes this is a genuine Nikon charger.

Q: 4. Does this charger work directly from a wall outlet...w/o a cord?

A: It wont put or the package, but it will if you purchase a 90-degree adapter that plugs into the same slot as the included cord. I did that and it works pretty well. I usually plug it into a power strip, but it also works ok on the wall as well in my case.

Q: 5. USB type c cord

A: Consider the following cables USB-A to USB-C: https://bhpho.to/3B9zxWn USB-C on both ends: https://bhpho.to/3Ba57mI

Q: 6. Does this charger work with my M9 camera battery?

A: Dear James This Charger 14470 works well with leica M9. Regards. Josef

Q: 7. amps ?

A: It should be 1A input.

Q: 8. Does this have AC wall plug or USB?

A: It's an AC plug.

Q: 9. does this charger work with the np-fm500h battery ?

A: This charger is for the NP-FZ100 Battery Pack. The correct type of charger for the NP-FM500H is the Sony BC-TRV Travel Charger, BH # SOBCTRV. https://bhpho.to/2S81TQ2

Q: 10. This is insanely expensive especially considering the battery is so expensive. It can't be plugged directly to an outlet?

A: The Sony BC-QZ1 Battery Charger can be plugged directly into an outlet with the provided cable. While it is not clear from the photos, the cable does come with prongs.