Enhance your cooling capabilities with the roomy and spacious Lian Li LANCOOL III RGB Tower PC Case. Combining style and performance, the LANCOOL III offers robust functionality designed for new and seasoned builders alike.

Sporting a modular design enables you to leverage high-performance components such as E-ATX motherboards, liquid AiO systems, custom cooling loops, as well as fan CPU coolers up to 7.8" tall. Grated ventilation panels promote airflow with three 140mm RGB fans pre-installed at the front along with a single 140mm fan exhaust fan at the rear. Eight expansion slots allow you to install various utility cards as well as graphics cards up to 17.1-inches long. You have a variety storage drive mounting options giving you a total of 12 drive bays that can hold 2.5-inch drives, three of which can adjust to hold 3.5-inch drives if needed. Front I/O ports offer instant access to one USB Type-C port, two USB Type-A ports, and a 3.5mm combo audio jack. This panel can be relocated to the bottom of the chassis, ideal for users who place their build on a desk.

ATX, E-ATX, Micro-ATX, M-ITX Support    Windowed Side Panel    8 x Dedicated 2.5" Drive Bays    3 x 3.5/2.5" Drive Bays    8 x Expansion Slots    USB Type-A | USB Type-C | 3.5mm Jack    3 x 140mm RGB Front Fans Included    1 x 140mm Exhaust Fan Included    Support for Liquid Cooling & Custom Loop    Supports GPUs up to 17.1"

Sporting a modular design, the LANCOOL III enables you to make adjustments to fit a variety of high-powered components including a wide range of ATX, Micro-ATX, M-ITX, and robust E-ATX motherboards. Hinged flip panels give you quick access to your components without needing to worry where to place your panels down, risking potential breakage.

A spacious internal design allows you to equip your system with a variety of cooling systems including air, liquid AIO, and custom loops. Equip the LANCOOL III with up to 10 fans total, three 120mm or 140mm fans to the top and front, three 120mm fans at the bottom of the main chamber, and a single 120mm or 140mm fan at the exhaust port. You can also install 360mm or 420mm radiators to the top or front of the LANCOOL III. The included multi-way fan bracket offers four different ways to mount a radiator or fans to cater to different cooling needs and features a new mechanism to easily secure it in place.

The adjustable modular PSU shroud bracket can accommodate one 360mm radiator, three 120mm fans, three 2.5" SSDs, or a pump and reservoir combos for greater utility and building options, allowing you to fully utilize every inch of the LANCOOL III.

Providing you with up to 12 drive bay locations, you can amass a large storage array suitable for gamers and media editors alike. Two adjustable drive cages can be individually removed, two spring-loaded trays located behind the motherboard tray allow toolless installation of drives, and side-mounted SSD trays located inside the PSU shroud panel can support up to three 2.5" drives.

Behind the motherboard tray lies a dedicated chamber designed to enhance your cable management, equipped with magnetic cover doors and cable management straps, keeping your internals nice and organized. The sliding cable routing cover can be adjusted to fit different sized ATX and E-ATX motherboards with a width up to 11" wide.

Additional features revolving around the pre-installed 140mm RGB fans give you greater customization options. The front panel includes two additional buttons designed to control the lighting mode and colors with a simple press.

Mounting slots beside the motherboard are provided at 105mm apart to allow the installation of a distro plate or a reservoir and pump bracket.

The removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.

A GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.

An optional vertical GPU kit can be purchased so you can show off your graphics card in all of its glory.

A front, top, and left side magnetic dust filter is offered to provide a higher level of dust filtration. Please note that the airflow will be impacted by the dust filters.

Related Questions and Answers

Q: 1. Does it support 360mm aio cooler at the top and does it support e-atx?

A: Yes the case does supports 360mm AIO cooler top.

Q: 2. Will this case hold a 280 mm radiator on front ? or on top? or in both?

A: The Lian Li LANCOOL II Mesh Performance Mid-Tower Case (Black) BH #LILAN2MPX can hold the following radiator configuration: Front (multi-way fan/radiator bracket): 1 x 360/280/240mm Top: 1 x 240mm (aligned to the left)

Q: 3. Does anyone have this case and a 850w psu? Struggling to find one that would work.

A: The highest we offer is 700W. SilverStone SFX Series 700W 80 Plus Platinum Modular SFX-L Power Supply BH #SISX700LPT They do offer the SX1000 Platinum and SX800-LTI which we do not carry.

Q: 4. is there options for a fan hub?

A: Yes, you can install a fan hub inside the Lian Li LANCOOL II Mesh RGB Mid-Tower Case (Black) BH #LILAN2MRX.

Q: 5. DVD-RW Bays?

A: The Lian Li LANCOOL II Mesh Performance Mid-Tower Case (Black) BH #LILAN2MPX does not support optical drives, there are no 5.25'' bays or a door on the front.

Q: 6. So the front panel supports USB 3.2 GEN 2 USBC header?

A: Yes, it does support it.

Q: 7. Can the fans be controlled by MSI Mystic Light?

A: There are no officially supported Lian Li cases for MSI Mystic Light

Q: 8. How is the (Black, Type-C) BH #LILAN2MPX50 difference from (Black) BH #LILAN2MPX?

A: The LILAN2MPX50 has USB-C ports. The other does not.

Q: 9. Will the Gigabyte TRX40 Aorus Xtreme motherboard fit in this case? The motherboard is 325mm x 275mm (12.80 x 10.83 inches).

A: The Lian Li O11 Dynamic XL Full Tower Case (White) BH #LIO11DXLW does not officially fit XL-ATX. While some users report being able to install them, I would recommend looking into a larger case.

Q: 10. Does the non rgb version comes with a fan hub and switch to control fan speeds?

A: The Lian Li LANCOOL III Tower PC Case does not include a fan controller.