Run your B-mount camera and pro video accessories from the B290CINE 14.4/28.8V 294Wh B-Mount Li-ion Battery from Bebob Factory GmbH. Robust and versatile, the B290CINE's B-mount interface enables powering B-mount devices, either 24 or 12V cameras or lights, with the correct voltage, which is determined by the device's B-mount plate.

The dual-voltage output is safe to use with your device, as the B-mount will not allow the higher voltage to flow to a device designed to handle 12/14.4 volts, nor will it allow you to underpower your 24V device. The battery features both a D-Tap and USB port for powering accessories. Designed to be strong, reliable, and versatile, this battery is built to withstand falls from 4.9', while its modular design makes for easy repairs.

4x 294Wh Lithium-Ion B-Mount Batteries    Supports up to 20A Maximum Load    4-Bay B-Mount Charger    Independent Charging/Power Adapter Modes    12V D-Tap Accessory Output    5-Step LED Fuel-Gauge    Integrated Carry Handle on Charger

Sturdy and reliable B-mount interface.

Withstands falls from up to 4.9', but if it does get damaged, its mechanical components are replaceable thanks to Bebob's modular design, allowing you to simply replace only the damaged mechanical components.

Another flexible feature is the Twist D-Tap port. Normally, you're limited to connecting a D-Tap cable only one way, but this rainproof socket allows you to plug a D-Tap connector into the battery with free choice of cable trailing from the left or right without reversing the output power polarity. The B290CINE also provides a 5V USB port for charging your mobile devices on location.

The B290CINE features lithium-ion trimix cells that offer a 20A maximum draw and a capacity of 294Wh. The 5-step LED status makes it easy to keep an eye on your battery's remaining power, so you know when it's time to recharge. Charging time is approximately six hours when using Bebob BS2/BS4 chargers.

Related Questions and Answers

Q: 1. Does the battery come with a charger, and if so, how long does it take to fully charge?

A: This battery does not come with a charger. In the future on our website, you can look for the In The Box listing of what comes with the item. The small affordable charger I am showing here will take about 8-10 hours for a full charge. The more expensive charger can do the job in about 2 1/2 hours. IndiPRO Tools D-Tap Pro Battery Charger (16.8V, 2.5A) B&H # INPD1013 IndiPRO Tools V-Mount Dual Battery Charger with XLR Output B&H # INPD2BCH.

Q: 2. Can this charger also charge my 150W 14V INRDM150S batteries?

A: IndiPRO recommends only using 26V batteries with the IndiPRO Quad 26V V-Mount Lithium-Ion Battery Charger. IndiPRO recommends the IndiPRO Tools V-Mount Dual Battery Charger with XLR Output for use with the INRDM150S batteries. https://bhpho.to/3HqhRsO

Q: 3. Can the AC Adapter that ships with the Panasonic G9 be used to power the SBCX-1 charger?

A: No, the charger on the OM SYSTEM SBCX-1 Lithium-Ion Battery and Charger Kit has an USB type C port while Panasonic DMW-BTC13 Battery Charger provided with the Panasonic Lumix G9 Mirrorless Camera has a micro usb port, therefore the cable included with this unit is not compatible with OM SYSTEM SBCX-1 charger.

Q: 4. can i use in neo 2

A: This battery can be used with a Neo 2 https://bhpho.to/2Q1HIi3.

Q: 5. This charger holds 2 batteries but one comments says it only charges one at a time. True?

A: The OM SYSTEM SBCX-1 Lithium-Ion Battery and Charger Kit charges two batteries simultaneously.

Q: 6. Does it come with a charger?

A: The promotion of which a free charger comes with the battery has ended. If you are interested in a battery charger we offer a number of different chargers for any need of yours.

Q: 7. can it charge other v mount brand batteries with high amp and capacity (15Amp, 290Wh)?

A: Yes it can. In general V-Mount battery systems are universal.

Q: 8. How many watts does the USB-C charger that powers this need to be to provide the fastest charging speed possible for two BLX-1 batteries at the same time?

A: It uses the same USB cable and charger that comes with the OM1 camera.

Q: 9. Would this work with the Nikon EN-EL15 BH #TECRN5B • MFR #CRN5B ?

A: That part does not work with this plate. However IndiPro Tools does offer BH #INPDVNK86 which is the IndiPRO Tools V-Mount Plate with EN-EL15 Dummy Battery (15mm Rod Bracket). https://bhpho.to/344COFQ

Q: 10. Can you ply this right into the BOCC4k for power the way it comes? Or would I hav etc purchase a Dtap connector ?

A: This plate features a 2.5mm connector that is hard wired directly from the plate so there will be no need to purchase a separate d-tap connector for the camera. The plate does feature an additional d-tap port so if you wish to power another device than you would need to buy a separate d-tap cable.