Run your B-mount camera and pro video accessories from the B155CINE 14.4/28.8V 155Wh B-Mount Li-ion Battery from Bebob Factory GmbH. Robust and versatile, the B155CINE's B-mount interface enables powering B-mount devices, either 24 or 12V cameras or lights, with the correct voltage, which is determined by the device's B-mount plate.

The dual-voltage output is safe to use with your device, as the B-mount will not allow the higher voltage to flow to a device designed to handle 12/14.4 volts, nor will it allow you to underpower your 24V device. The battery features both a D-Tap and USB port for powering accessories. Designed to be strong, reliable, and versatile, this battery is built to withstand falls from 4.9', while its modular design makes for easy repairs.

155Wh Lithium-Ion B-Mount Battery    2-Channel B-Mount Battery Charger    Supports up to 20A Maximum Draw    Twist D-Tap and USB Accessory Outputs    5-LED Power Gauge    14.4/28.8V Dual Voltage

Sturdy and reliable B-mount interface.

Withstands falls from up to 4.9', but if it does get damaged, its mechanical components are replaceable thanks to Bebob's modular design, allowing you to simply replace only the damaged mechanical components.

Another flexible feature is the Twist D-Tap port. Normally, you're limited to connecting a D-Tap cable only one way, but this rainproof socket allows you to plug a D-Tap connector into the battery with free choice of cable trailing from the left or right without reversing the output power polarity. The B155CINE also provides a 5V USB port for charging your mobile devices on location.

The B155CINE features lithium-ion trimix cells that offer a 20A maximum draw and a capacity of 155Wh. The 5-step LED status makes it easy to keep an eye on your battery's remaining power, so you know when it's time to recharge. Charging time is approximately four hours when using Bebob BS2/BS4 chargers.

Related Questions and Answers

Q: 1. How long would this last on Alexa 35?

A: This can vary greatly depending on weather conditions, continuous run time, and the accessories attached to your Alexa. We’d estimate the battery would last around 90min under typical use and about 35min if you’re using the Arri Power Distribution Module (BH #ARPDM1 MFR #K2.0024101).

Q: 2. Does this battery fits a normal Vmount adapter or it is suitable only for Vmicro adapters?

A: Hi Philippos, the Vmicro battery series fits every normal Vmount adapter. You could use the V150micro with your existing adapters without any problem. Many thanks for your interest!

Q: 3. Will this battery fit on the native mount of a Red V Raptor without adding a battery extension plate?

A: The bebob V150MICRO 14.4V, 147Wh V-Mount Li-Ion Battery can mount to the RED DIGITAL CINEMA V-RAPTOR 8K S35 Camera (Canon RF).

Q: 4. Can I charge a Bebob A150 Micro gold mount battery with a IndiPRO Tools Gold Mount Dual Battery Charger with XLR Output?

A: Yes, the bebob A150 Micro 14.4V 147Wh Gold Mount Li-Ion Battery can be charged with the IndiPRO Tools Gold Mount Dual Battery Charger with XLR Output.

Q: 5. can the d-tap conection use for power other devices or its only for charge the battery?

A: The D-Tap output on the FotodioX Li-Ion 130Wh V-Mount Battery can be used to charge or power other devices that also have a D-Tap connection.

Q: 6. Will this work with Sony A7siii with the Atomos Ninja? What wouid be the best way to wire them together?

A: To connect the bebob V98MICRO 14.4V, 98Wh V-Mount Li-Ion Battery to power the Sony a7S III Mirrorless Camera as well as an Atomos Ninja, the Watson Pro D-Tap 1x4 Splitter Cable, B&H # WACADTAPX4, would first be needed. You could then plug the included Atomos D-Tap into the splitter and power the Sony with the Kondor Blue D-Tap To Sony a7S III Dummy Battery NP-FZ100 Cable, B&H # KODTSA7SDB.

Q: 7. Can I charge these on Anton Bauer gold mount chargers?

A: Yes, you can charge the bebob A98 Micro Gold Mount Battery on Anton Bauer Gold Mount Chargers.

Q: 8. What is the maximum draw this can handle?

A: Unfortunately the manufacturer is unable to provide a detailed spec.

Q: 9. how long would this power an arri alexa mini?

A: The bebob A150 Micro Battery will power an ARRI ALEXA Mini for up to 3.48 hours.

Q: 10. How long does the V45 last? We're thinking of powering a Blackmagic 6K and two Nucleus-M motors with it.

A: According to Bebob, the Bebob V45MICRO 14.4V, 43Wh V-Mount Li-Ion Battery, will last a little longer than 1 hour when powering a Blackmagic 6K and 2 Nucleus-M motors, with the appropriate rig and connector for powering those devices.