Use the Ready Rig GS Stabilizer + ProArm Kit to transfer the weight of a gimbal-mounted camera away from an operator's arms and shoulders. By redistributing the load to the user's hips and core, this rig enables you to extend your shooting time and lessens operator fatigue. It also reduces the bounce motion sometimes seen during handheld gimbal shots. The Ready Rig GS Stabilizer works with any gimbal in standard or underslung mode.

The Ready Rig ProArms increase the basic GS Stabilizer's load range from 30 to 40 pounds. They telescope from 23 to 37", producing an effective boom range of 55". For greater operating convenience, the ProArms also feature 1/4"-20 and 3/8-16" threads, enabling you to mount an onboard monitor to either arm.

The Ready Rig GS with ProArms features a load capacity range of 1 to 40 pounds, carbon fiber support arms, and an aluminum frame. Its slim, compact profile suits it for use in tight spaces and car interior shots. A soft, zippered carrying case is included with this kit.

GS Vest & Arms Stabilizer Kit    Tilta Advanced Ring Grip    CineMilled GS Spindle Mount Pair    Ring Supports RS 3 Pro or RS 2 Gimbals    Vest Load Capacity Range of 1-40 lb

Supports any gimbal or camera rig from 1 to 40 pounds

Adjustable arms telescope from 23 to 37", with an effective boom range of 55"

An onboard monitor can be mounted to the 1/4"-20 or 3/8"-16 threads on each arm

Provides vertical axis stabilization while reducing operator fatigue

Slim, lightweight design with carbon fiber support arms and aluminum components

Operate gimbal in over- or underslung configuration

A soft, zippered carrying case is included in the kit

Related Questions and Answers

Q: 1. How large is the rig, weight and carry bag? Will the airlines allow as a carry on or should I pack it with my checked luggage? I'm female, 5'6 in height and weigh 120lbs. I flying internationally and have three connections. Just wondering about carrying through the airports during connections. Appreciate any info, thanks!

A: The ReadyRig GS weighs 14 pounds and it takes up a decent amount of room. You are going to need to check it in to luggage.

Q: 2. Will this work with the new DJI RS 3 Pro?

A: If you have a supporting device for the RS3 Pro, then it will be able to attach to the Ready Rig GS Stabilizer. You would need a Tilta Basic Ring Grip (or other similar support).

Q: 3. Can the pins that adjust the back support be replaced? One of the back pins appears to have fallen off and I can no longer adjust the back support

A: BH #RERRHRK is the Ready Rig Hardware Replacement Kit.

Q: 4. What compatibility does the Ready Rig have with a handheld setup? No gimbal -- just a camera on a shoulder mount, for example. Can it be compared with an Easy Rig in this regard?

A: While the ReadyRig is designed to be used with a gimbal and to have both harnesses connect to a gimbal's top bar, it is possible to use this unit with a shoulder mount camera as well. You would probably just want to use a single arm and connect it to the top handle of your shoulder mount camera.

Q: 5. Looking to use this whilst riding a motorcycle with a Ronin and dslr. Is it possible to use this without your arms or will the whole thing just bounce around?

A: It will bounce around.

Q: 6. Does this rig come with connecting straps?

A: Yes, it will come with the connecting straps.

Q: 7. Hi guys, short woman here. I'm only 5'3 and I have a Glidecam vest, but it's huge on me because I'm super short. Can anyone tell me what the length of the vest is to see if it'll fit my torso properly?

A: Just measured mine - The length of the padded section that will sit against your back is 50cm. The size of the vest is 100% adjustable so I'm confident that you will be able to find a good fit. The height of the shoulder pads can be adjusted up and down to accommodate all shapes and sizes!

Q: 8. Will this work for handheld operation? Also would it work with the Letus Helix Pro gimbal?

A: The Ready Rig GS Stabilizer + ProArm Kit with Case can be use for handled shooting when using proper mounting solutions. The Ready Rig GS Stabilizer + ProArm Kit with Case should als be able to support the Letus35 Letus Helix Pro Magnesium Gimbal, but it may be difficult to operate the gimbal, again it would depend on how you mount the gimab to the straps.

Q: 9. Can you upgrade to the GS arms later?

A: You are in luck, yes, the original GS can be upgraded with ProArms at a later time.

Q: 10. Do these work with Tilta advanced ring?

A: Yes, The Tilta Advanced Ring diameter is 30mm so the CineMilled Ready Rig GS Spindle Mount for MoVI Pro Ring should work since it supports 30mm mounting.