The Cambo WRS-1100 is a rear cover for the WRS lens panels. It protects the inside of the Cambo WRS lens panels against dust and pollution when not mounted to the camera body. It replaces the often difficult to reach default lens caps inside the mount. The WRS-1100 is made of durable black synthetic material.

Compatible with all lens panels of the WideDS, WRS and WideCompact and PhaseOne XTcameras.

Related Questions and Answers

Q: 1. Does this camera work using a Hasselblad x2d as the digital back? What adapters would integrate this camera with that back?

A: The Hasselblad X2D Medium Format Mirrorless Camera cannot be used as a digital back for the Cambo WRS-5000 Technical Camera (Rosewood). You could use the Cambo ACTUS-XCD View Camera Body with Hasselblad XCD Bayonet Mount (Black), BH #CAACTUSCAMB, with the Hasselblad X2D Medium Format Mirrorless Camera.

Q: 2. Does the lens use a lens board and if so which one?

A: The Cambo Rodenstock HR Digaron-W 32mm f/4 Aperture Body Lens can be attached to a zero lens board. It can also be attached to a lens panel and used on a Cambo WRS/WDS camera with digital backs activated by electronic shutter. We list that lens with the lens panel in this link. https://bhpho.to/3282voG

Q: 3. I see a Canon Tilt Shift lens being used on this Cambo WRS. How would I achieve this?

A: In order to use Canon lenses you will need 2 things:1) A digital back with electronic shutter capabilities, such as the Phase One IQ3-100.2) The WRE-CA Lensplate adaptor attached to this answer. A few things to note however:Even though they will mount, some lenses do not have enough image circle to cover the full sensor size of medium format digital systemsSome Canon lenses also are focus by wire and will not allow for the lens to focus when not connected to a Canon body. The 17mm and 24mm TS-E lenses are able to be controlled, focused, and have an image circle large enough to cover the sensor.

Q: 4. How many counterweights in total are included?

A: The Celestron CGX-L 1100 EdgeHD Telescope includes two 22-pound Celestron CGE PRO Counterweights.

Q: 5. How wide is are the tripod legs when extended? (i.e., how much floor space does this take up?)

A: According to Latch Lake web page: Tripod Base Our patent pending Symmetric Torque Tripod base features all new folding solid core legs giving you the distinctive stability all micKings are known for with a portable touch. This base enables a breakdown size of just under three feet. That's all I could find, you may want to call them: Latch Lake phone #: 1-800-428-2437

Q: 6. Without the 5 degree spot meter attachment, that costs over $100, what is the angle of measure for reflected light? Is it 40 degrees like the Sekonic L308?

A: The KFM-1100 meter unit is an incident-light reading meter.To use for reflected readings, one of/or two additional attachments need to be purchased: KFM-400 attachment which gives a 40degree angle, or a spotfinder attachment which gives 5 degrees (refer to page 10 of instruction manual)

Q: 7. How do I connect a camera to this scope to be able to capture any images?

A: Thwere are two ways to connect a camera to the Celestron EdgeHD 11" f/10 Aplanatic Schmidt-Cassegrain Telescope (OTA Only), One way would be to connect a camera to the eyepiece adapter: https://bhpho.to/3B7iM02 Then you will need the dedicated T mount adapter for your camera mount. The other way would be to use a T mount into the eyepiece slot, and connect the T mpo0unt adapter to that one: https://bhpho.to/3L8PFy8

Q: 8. It says it's incompatible with the Cambo DB Actus system, but does it look compatible?

A: The Cambo ACTAR-90 90mm f/4 Lens is not compatible with the Actus DB version.

Q: 9. What's the lens crop factor ?Any lens vignette ?Is there a lens lock switch to prevent lens falling out of the adapter ?

A: 1) Crop factor should be around the .55 range (if my math is correct). Because the Hasselblad V lenses were designed to cover a 6x6 film negative there should not be much.2) Individual results may vary, and an entire list of coverage options cannot be provided at this time. However most lenses should be fine. 3) The lens is secured to the adaptor when in use.

Q: 10. Does this work with Adobe Photoshop?

A: No, The system will adapt to adobe lightroom and premiere.