This Single-Mode HDMI 2.0 Fiber Extender Kit from MuxLab can transmit and receive a HDMI 2.0 signal up to 6.2 miles over a single-mode fiber optic cable in point to point configuration. Up to 4K video at 60 Hz is supported by both the transmitter and receiver. The kit is HDCP 2.2 compliant and is compatible with USB 1.1 devices such as keyboards and mice.

Control over both the transmitter and the receiver can be achieved via the RS-232 port or the IR receiver and blaster connectors. An LED indicator shows the power and link status of each device. The kit includes brackets and screws to mount it to the wall and two 12 VDC power supplies for easy integration into your preexisting workflow.

Transmits and Receives HDMI 2.0 Signals    Supports up to 4K @ 60 Hz HDMI & HDR    HDCP 2.2 Compliant, USB 1.1 Compatible    6.2 Miles over Single-Mode Cable    RS-232, IR Receiver/Blaster    LED Indicator Light    Wall Mount Bracket Kit    Two 12 VDC Power Supplies

• Supports HDMI 4K at 60 fps, HDR 4K at 60 fps, and HDCP 2.2
• Extends signal up to 6.2 miles over single-mode fiber optic cable
• Supports USB 1.1 for keyboard and mouse connection
• Full frequency IR signal from 20 kHz to 60 kHz
• Bidirectional IR passthrough
• Link LED indicator light
• Wall bracket kit with screws to mount onto wall
• Includes two 12 VDC power supplies

Related Questions and Answers

Q: 1. Will this HDMI splitter work with the Blackmagic UltraStudio Mini Recorder?

A: The UltraStudio Mini Recorder can accept signals up to 1080p in 30 fps. However, as this splitter will only output in a 60 fps signal, you may be limited to 720p quality for the Mini Recorder input.

Q: 2. So is this card HDMI 2.0 not the same card as the one bundled with the latest DeckLink 4K Extreme 12G listed as HDMI 2.0b?

A: Yes, The Blackmagic Design Decklink HDMI 2.0 & Optical Fiber Mezzanine Card for Blackmagic Design is the card included with the DeckLink 4K Extreme 12G Capture & Playback Card bundle.

Q: 3. I want to connect samsung flip (UHD signal) to atem mini pro (only accept 1920x1080 and yuv signal), will this hdmi splitter work?

A: NO, this slitter will work with the UHD signal but it can not down-convert the resolution so the signal will remain UHD and will not be accepted by the ATEM mini Pro

Q: 4. Will this pass through Dolby Vision and Dolby Atmos?

A: NO it will NOT

Q: 5. Does this come with the power supply?

A: Yes, the MuxLab 5x1 HDMI Switcher with 4K Support comes with a 5V DC power adapter.

Q: 6. Can I run 4K from my Xbox series x to my projector with this ?

A: Yes you can run 4K from your XBox into your projector using the DVDO DVDO-AIR-4K.

Q: 7. Has anybody used this device to feed HDMI over 200ft Cat5/6 to Black Magic switcher input?

A: This device when used with the transmitter has been tested to send an HDMI signal up to 230' using Cat 5e/6 cable connecting to any device that accepts a standard HDMI signal.

Q: 8. What is the latency?

A: Model: OMX-HDMI-HDB1X8 has a latency of around 220ms.

Q: 9. Hello... Does it work with Blackmagic Design Decklink 8K Pro.

A: The Blackmagic Design Decklink HDMI 2.0 & Optical Fiber Mezzanine Card for Decklink 4K Extreme 12G is meant to be installed as a component for the Decklink 4K Extreme 12G Main Board.

Q: 10. Could this be charged from the USB port of a camcorder (Sony AX700)?

A: No, the DVDO Air 2K 1080p/60 HDMI Wireless Extender Kit (30'+) cannot be powered from the USB port on the Sony FDR-AX700 4K Camcorder.