Enable your IT technicians to command multiple computers from a single setup with the Vertiv Avocent AV108 Single User KVM Switch with Cables. Designed for growing businesses, this switch provides easy system management for multiple devices, making this an ideal solution for those looking to save room, simplify wire management, and have a streamlined control system.

Your setup can support a single VGA display with a resolution up to 2048 x 1536 while three USB 2.0 Type-A ports allow you to connect keyboards, mice, and thumb drives for firmware upgrades. Two front-panel pass-through USB 2.0 Type-A ports allow you to use connected devices on selected targets. Front-panel push buttons offer easy switching between systems or you can use convenient hotkey support or on-screen display commands. LED indicator lights tell you which systems are connected and selected, making management easier. Additionally, this unit can fit within a 0 RU and 1 RU rackmount while also supporting cascading functionality so you can scale your connection to additional systems if needed. This unit includes eight 6-foot 26-pin to VGA target cables so you can get a head start on assembling your system.

Supports up to 8 Systems    Single Monitor Operation    2048 x 1536 Resolution Support    5 x USB 2.0 Type-A Ports    1 RU Rack Form factor    Cascade Support    Push Button & Hotkey Switching    On-Screen Display Command Support    LED Indicator Lights

The rear panel of the AV108 sports 8 26-pin headers, allowing you to use various cables so you can connect your system to the KVM switch.

The AV108 provides you with three ways of switching between different connected systems. Traditional push-buttons, hotkey support, and on-screen display. With on-screen display commands, you can rename target devices, enable or disable port binding, display firmware version, and adjust scan time intervals.

Front-facing USB 2.0 Type-A ports connect to the device you have selected, and if you switch to another device, the KVM then switches those ports to connect to that system.

You can connect a secondary switch to each port of a primary switch, allowing you to control additional switches, allowing you to scale your operation depending on workload.

Related Questions and Answers

Q: 1. country of origin?

A: Country of Origin: China

Q: 2. Does this Datavideo ITC-100 will work with video switchers different make than Datavideo, like Roland video switchers?

A: I have mine integrated with the Blackmagic ATEM TV Studio using a BMD GPI/Tally unit and a custom wired cable, and the live tally works great but there is no warning (preview) light.

Q: 3. Is the UPS plug angled or straight? I need a UPS that can plug into a recessed floor outlet, so the angled plugs are not useful.

A: The VERTIV Liebert PST5-660MT120 8-Outlet UPS has a straight plug.

Q: 4. Full-load runtime and half-load runtime??

A: The VERTIV Liebert PSl5-1000RM1201U 1U Rack Mount UPS can run at Full load of 900 watts for 9 mins, or half load of 450 watts for 13 mins.

Q: 5. And there is any wireless tranmiter?-dr asok

A: No, Datavideo does not have any wireless intercom systems.

Q: 6. What is its size? and how much does it weigh?

A: Dimensions are as follows: 17.2" (438mm) Width x 1.7" (44mm) Height x 20.1" (511mm0 Depth. Weight of the unit is 36.4LBS (16.5KG) SHIPPING DIMENSIONS: 22.1" x 23.4" x 5.5" (540mm) x (595mm) x (140mm) MINIMUM AIRFLOW CLEARANCE IS 4.0" (100.0mm) - FRONT/REAR

Q: 7. How many Mbps is the network connector capable of?

A: The manufacturer does not state the throughput of the network connections on the VERTIV Liebert PST5-850MT120 8-Outlet UPS.

Q: 8. After a power outage and return to line power, does this unit automatically switch back or stay on battery until it runs out?

A: The VERTIV Liebert PSA5-1500MT120 UPS BH #VEPSA51500M should switch back to line power and charge after the power is restored.

Q: 9. Is the USB-A port battery backed? Surge protected? Or just pass-through?

A: The VERTIV Liebert PST5-850MT120 8-Outlet UPS's USB-A charging port is not surge or battery protected.

Q: 10. Will this work for Genelec 8030.LSE monitors and a 7040 6.5 subwoofer?

A: No, the GLM 2.0 Kit is designed for use with Genelec's SAM series Smart Active Monitors and Subwoofers. The 8030.LSE monitors and 7040 6.5 subwoofer are not part of the SAM series.