The CHE-HD200 HDMI 4K Cat Extender Kit from Comprehensive can extend high-definition video, audio signal, and one-way IR up to 230' between transmitter and receiver over a single Cat 6/6a/7 cable. It supports resolution up to

4K at 60 Hz, 18 Gb/s, and HDCP 2.2. In addition, the extender is equipped with one-way IR pass-through, which allows for source control and one HDMI loop output.

The extender includes two units: transmitter and receiver. The transmitter unit is responsible for capturing HDMI input signal and carries the signal

via one Cat 5e/6/6a/7 cable, and emitting IR control signals. The receiver

unit is responsible for receiving the HDMI signal and transmitting IR control

signal. The extender offers the most convenient solution for HDMI extension over a

single Cat5e/6 with long distance capability.

Up to 4K Video at 60 Hz    Extend 4K60 to 197', 4K30 to 230'    HDCP 2.2, EDID Support    Extends HDMI over Cat 5e/6/6a/7 Cable

• HDMI 2.0, HDCP 2.2/1.4, and DVI 1.0 compliant
• Supports 18 Gb/s bandwidth
• Supports input and output video resolution up to 4K at 60 Hz 4:4:4, extends

  distance up to 164'

• Supports one HDMI loop output
• Supports one-way IR pass-through
• Supports HDR function
• Supports PoC (Power over Cable) function
• Supports automatic copy EDID function
• Compact design for easy and flexible installation

Related Questions and Answers

Q: 1. Can this device be used with a Canon 90d?

A: Yes it can.

Q: 2. Could this be charged from the USB port of a camcorder (Sony AX700)?

A: No, the DVDO Air 2K 1080p/60 HDMI Wireless Extender Kit (30'+) cannot be powered from the USB port on the Sony FDR-AX700 4K Camcorder.

Q: 3. Can I run 4K from my Xbox series x to my projector with this ?

A: Yes you can run 4K from your XBox into your projector using the DVDO DVDO-AIR-4K.

Q: 4. Does it support 3D?

A: IOGEAR says: Than k you for choosing IOGEAR. The GW4K30GH60 does not support 3D . Once again thank you for choosing IOGEAR.

Q: 5. What is CEC bypass? I'm looking for a device that will not pass through CEC commands but will allow ARC audio via HDMI. How is CEC bypass enabled on this device?

A: CEC stands for Consumer Electronics Control. This is a control function that lets one A/V component control another if they are connected via HDMI cables.

Q: 6. Is this compatible with Apple TV? Will it extract a L/R audio signal from an Apple TV G4 regardless of the audio output setting on the ATV4? What constraints/limitations apply to using the device in this manner?

A: This should work fine with an Apple TV.

Q: 7. Hello, we need an hdmi over cat 6 splitter with poe with mixer, to mix 2 or more in hdmi signals to each one out signals, have you another model of this device with this option ?

A: No. The only well know systems that we carry are the A-Neuvideo line.

Q: 8. Will the power supply included with the Shinobi charge the NP-F batteries?

A: We're afraid not. You cannot charge a battery on the monitor itself.

Q: 9. Will it extract 2 channel pcm from a multichannel hdmi signal for feeding to a stereo receiver while sending the other channels to a separate preamp?

A: Yes, we believe this is possible.

Q: 10. Is it compatible with the BMPCC 4K log ?

A: hello Charles, it is not directly BMD LOG- however it is similar to the Sony S-LOG. you can try that LOG setting.