The 26V Gold Mount Plus Plate from Anton/Bauer enables you to power your ARRI ALEXA 35 camera with a single Dionic 26V battery. This Gold Mount Plus plate mounts directly on the back of your camera, saving space and weight on your rig. Full battery data is transmitted via the SMBus protocol and the plate's pogo pins.

Dionic 240Wh 26V Battery    Gold Mount Plus Plate for ALEXA 35    Secure Gold Mount Plus Interface    Supports up to 12A Constant Draw    Overvoltage & Short-Circuit Protection

Transmits full battery data, enabling accurate battery monitoring

Related Questions and Answers

Q: 1. What is difference between this and the other AB GM universal plate BH#: ANGBBDPT / MFR#: 8075-0286?

A: The Anton/Bauer QRC-Digital Gold-Mount Battery Plate BH #AN3SBP has a single P-Tap connector and, the Anton/Bauer BH #ANGBBDPT has dual P-Tap connectors for powering gear.

Q: 2. Are these batteries dual voltage? Can I use these batteries on an Amira?

A: No, The Anton Bauer Dionic 26v 98Wh battery is only 26v and not a Dual Voltage battery (26/14v). Also, Yes this battery will support the Arri Amira if you have a gold mount adapter.

Q: 3. Does the charger need to be attached to the camera to charge?

A: In order to charge, you will need the charger attached to the camera.

Q: 4. How long will this battery last to power an Arri Alexa Classic EV camera?

A: This is a 99Wh battery. While it will vary depending on how you use a camera, our research tells us that a camera like that may have around an 85 watt draw. You would be looking at around an hour with a battery like this.

Q: 5. Do these require a special ARRI gold mount battery plate for the 26v? Or will they work on the standard ARRI Gold Mount battery plate?

A: This battery does not require a special ARRI Gold mount battery plate. It will work on the standard ARRI Gold mount battery plate.

Q: 6. Can this setup also work on the Sony FX9?

A: No, the Gold Mount plate won't fit on your FX9 properly. You have to use a Gold Mount plate designed for the FX9, not the FS7. Anton/Bauer makes a "Battery Slide Pro Gold Mount for Sony FX9" (BH #ANSFX9GMBSP).

Q: 7. Can I charge this battery with standard 12v battery charger or do I need 26v charger?

A: This battery needs the 26v charger. The two chargers that is compatible to charge this battery are: Dionic 26V LP4 (BH #AND26VLP4GMC) & Dionic 26V LPD (BH #AND26VLPDGMD).

Q: 8. Is there a D tap out on these batteries?

A: The Anton/Bauer Dionic 98Wh 26V Gold Mount Plus Battery does not have a P-TAP (AKA D-TAP) port. Power tap - No USB - No

Q: 9. How long will this battery power a Sony FS7 M2K?

A: Depending upon level of operation (i.e. how much zooming, other adjustments, and format of recording), you should be able to count on 3 solid hours, if not a little more.

Q: 10. Will this battery work safely with the ARRI Amira?

A: The power inputs on the Amira are 10.5-34 V DC for the 8pin Lemo and 10.5-24 V DC for the on-board battery interface. We recommend using any of the ARRI battery adapters and cables to properly regulate your battery's voltage. https://www.bhphotovideo.com/c/buy/battery-adapters-cables/ci/34332?gclid=EAIaIQobChMIzb3N6pj57wIVHv_jBx0XKwbKEAAYASAAEgKXEfD_BwE