The 26V Gold Mount Plus Plate from Anton/Bauer enables you to power your ARRI ALEXA 35 camera with a single Dionic 26V battery. This Gold Mount Plus plate mounts directly on the back of your camera, saving space and weight on your rig. Full battery data is transmitted via the SMBus protocol and the plate's pogo pins.

2 x Dionic 240Wh 26V Batteries    Gold Mount Plus Plate for ALEXA 35    Secure Gold Mount Plus Interface    Batteries Support up to 12A Draw    Overvoltage & Short-Circuit Protection

Transmits full battery data, enabling accurate battery monitoring

Related Questions and Answers

Q: 1. Do these require a special ARRI gold mount battery plate for the 26v? Or will they work on the standard ARRI Gold Mount battery plate?

A: This battery does not require a special ARRI Gold mount battery plate. It will work on the standard ARRI Gold mount battery plate.

Q: 2. Can this setup also work on the Sony FX9?

A: No, the Gold Mount plate won't fit on your FX9 properly. You have to use a Gold Mount plate designed for the FX9, not the FS7. Anton/Bauer makes a "Battery Slide Pro Gold Mount for Sony FX9" (BH #ANSFX9GMBSP).

Q: 3. Would this work with the Sony FX9?

A: No, the Anton/Bauer Dionic 240Wh 26V Gold Mount Plus Battery would not output the proper power for the Sony FX9 camera. Also, please note that you would need to provide an optional Gold or V-Mount adapter to mount use the batteries with the FX9. We recommend 14v batteries from Anton Bauer https://bhpho.to/3VKhr99

Q: 4. What is difference between this and the other AB GM universal plate BH#: ANGBBDPT / MFR#: 8075-0286?

A: The Anton/Bauer QRC-Digital Gold-Mount Battery Plate BH #AN3SBP has a single P-Tap connector and, the Anton/Bauer BH #ANGBBDPT has dual P-Tap connectors for powering gear.

Q: 5. How long will this battery power a Sony FS7 M2K?

A: Depending upon level of operation (i.e. how much zooming, other adjustments, and format of recording), you should be able to count on 3 solid hours, if not a little more.

Q: 6. Im looking into switching battery mount on my GPI Pro Gen 4 battery rack, is this the correct type of mount to do this? Because I saw a lot of v-mount to AB but that's not what i want. I want to remove my v mounts and put in AB mounts

A: We do not sell GPI products so we suggest you consult with them before modifying any of their products. Here is their contact page. http://bit.ly/2tlinpA

Q: 7. Are these batteries dual voltage? Can I use these batteries on an Amira?

A: No, The Anton Bauer Dionic 26v 98Wh battery is only 26v and not a Dual Voltage battery (26/14v). Also, Yes this battery will support the Arri Amira if you have a gold mount adapter.

Q: 8. How do you reset these batteries?

A: The charger is sold separately. In the accessories on this item, we have a few different charger options that would work with this.

Q: 9. What screws do i need to mount to a redrock cheese plate?

A: Look for M2 screws. Need to look for them at a specialty hardware store, like TrueValue or Ace.

Q: 10. Will this battery work safely with the ARRI Amira?

A: The power inputs on the Amira are 10.5-34 V DC for the 8pin Lemo and 10.5-24 V DC for the on-board battery interface. We recommend using any of the ARRI battery adapters and cables to properly regulate your battery's voltage. https://www.bhphotovideo.com/c/buy/battery-adapters-cables/ci/34332?gclid=EAIaIQobChMIzb3N6pj57wIVHv_jBx0XKwbKEAAYASAAEgKXEfD_BwE