For smooth single-operator camera moves, crab or standard steering, or 30.3" in-shot height adjustment, the Sachtler Vario Ped 2-80 is your go-to camera support for cameras and rigs weighing up to 176 lb. Suitable for use on smooth surfaces and the studio floor, the pedestal can be used as support on exteriors and interiors. With its air inlet valve and an optional manual pump or compressed air tank, you can even use the pedestal in remote locations where power can be difficult to source.

Grab the included steering ring to move the pedestal from position to position for rapid camera placement, or change the height throughout the 30.3" range. The pedestal supports both standard steering and crab movement, allowing you to create smooth tracking and dolly moves. Featuring two Perfect Balance stages, the entire 30.3" height range has smooth vertical adjustment for in-shot camera moves. Narrow width allows you to move among tight spaces as well as through most doorways. The air inlet valve allows you to use an external pump to charge the pedestal, and the integrated pressure gauge lets you see the pressure remaining at a glance. The removable pedestal dolly has 5" wheels and cable guards to help prevent you from rolling over a cable ruining the shot, and it is removable for easier transport and storage.

Supports up to 176 lb    26 to 56" Height Range    30.3" Smooth In-Shot Height Adjustment    Crab and Steering Functionality    Removable Pedestal Dolly    Air Inlet Valve, Built-In Pressure Gauge    5" Wheels with Cable Guards    Narrow Transit and Tracking Widths

Supporting up to 176 lb, with almost effortless adjustments and precise steering, the Vario Ped 2-80 can be used to work with some of the heaviest cameras, lenses, and combinations of teleprompters to work in virtually any production from an intimate interview to an outside broadcast environment. Smooth and silent with exact direction control allows solo operators the freedom to position their cameras perfectly with ease.

Calibrated and perfectly balanced to counter gravity, the 2-80 Vario pedestal allows operators to lift and lower mounted cameras, teleprompters, and other accessories. Ergonomically positioned controls reduce strain on your body for more comfort during long periods of use.

The 30.3" height adjustment range makes it quick and easy to select the right camera height when filming seated or standing subjects.

Featuring two Perfect Balance stages, you can smoothly adjust the height of the pedestal through a 30.3" range while shooting without stops or bumps when adjusting the height. This allows the operator to create vertical camera movement without distracting the audience or to move from a seated to a standing position without jarring the camera.

Integrated column locks prevent the column height from shifting during moves.

The Vario Ped 2-80 and its included pedestal dolly support both standard and crab steering for smooth tracking moves without laying track, as well as free camera movement and positioning.

The 5" wheels with integrated cable guards help provide smooth camera moves while the cable guards help prevent you from rolling over unattended cables, which can lead to jarring camera moves, needing to rebalance your camera setup, or damaged cables and gear.

The 2-80 has an air inlet valve that lets you use optional pumps or a compressed air cylinder (not included) to replenish the pedestal's pressure.

Related Questions and Answers

Q: 1. Does it have a dedicated place for a 15" laptop?

A: Yes, there is a rear laptop compartment that can fit up to a 17" laptop.

Q: 2. Are the external specs correct? They seem to be quite large compared to the internal specs.

A: The exterior dimensions are 22.8 x 12.6 x 15.4".

Q: 3. How do I install a card in the card/ID holder on the side of the bag? It seems difficult to remove, I'm concerned I'll damage it.

A: The card/ID holder on the Sachtler Dr. Bag - 3 is not removable and it does not open. To put a card in the card holder it must be slid into place.

Q: 4. I have this Dr Bag 3-how does it compare in size against the Shape Camera bag?

A: The Sachtler Dr. Bag - 3 measures 22.8 x 15.4 x 12.6" / 58 x 39 x 32cm externally with internal dimensions of 17.3 x 9.3 x 8.3" / 44 x 23.5 x 21cm, while the SHAPE Camera Bag with Removable Pouches, B&H # SHSBAG, has dimensions of 20 x 12 x 12" / 50.8 x 40.64 x 30.48cm externally and internal dimensions of 20 x 11 x 10" / 50.8 x 39.37 x 27.94cm.

Q: 5. Is the bag water proof?

A: This bag is not marketed to be waterproof.

Q: 6. Does this bag hold a c300 mark II with top handle attached?

A: No. I have a c300 mark II with the Zacuto kit and it doesn't close... it's a great bag but I had to constantly be taking the handle off which was kind of annoying. I think I'm gonna return the bag.

Q: 7. How does Sachtler Dr.Bag3 compare in size to Arco Video Dr. Bag 20 for interior dimensions? Which is larger and has more features?

A: Sachtler Bag Interior Dimensions 17.3 x 9.3 x 8.3" / 44.00 x 23.5 x 21.00 cm Arco Bag Interior Dimensions 16.00 x 8.0 x 6.5" / 40.6 x 20.3 x 16.5 cm The Sachtler Bag is Longer Wider and Taller than the Arco Bag. The Sachtler Bag has more dividers on the inside and interior lighting. The Arco has more exterior pockets and the option to remove the interior insert.

Q: 8. Is it waterproof?

A: The Sachtler Dr. Bag - 3 (BH #SADRB3 • MFR #SC003) is water repellent but not fully waterproof.

Q: 9. How many dividers are included? I have 5 lenses, & a Nikon Z6iii, plus media cards to insert.

A: The Sachtler Camera Rollpak includes 1 long divider, 1 medium divider, and 2 short dividers.

Q: 10. Where can I get a replacement LED light for this?

A: I am afraid that is not a part we sell. That would be a Service Part which you would need to reach out to Sachtler directly regarding.