The LRS Triple G Rig Library for TH-U from Overloud is a quality rig simulator and expansion library for the TH-U Rig Player. This rig library is designed to capture the crushing tone of a special Rev G Mesa/Boogie Triple Rectifier amp head in multiple configurations.

This rig library was captured with 20 direct (no cab) rigs, nine cabinets, eight microphones, and six potent overdrive pedals, for a total of 182 rigs. Designed to be used in any version of TH-U that sports Overloud's Rig Player, a 3D amp simulator which makes it easy to reproduce accurate real-world rig models and tweak them to your desire, the LRS Triple G is a great choice for guitarists seeking a commanding, legendary amp with fantastic gain structure and a thick organic sound.

Quality Rig Capture for TH-U Rig Player    Mesa/Boogie Triple Rectifier Rev G Head    20 Direct Rigs, 9 Cabs, 182 Rigs Total    8 Microphones and 6 Overdrive Pedals    3D Rig Simulation with Rig-to-Model Tech    Compatible with All Versions of TH-U

The LRS Triple G rig library includes enough rigs to cover numerous rock styles and provides multiple sonic options including DI rigs, full amp/cabinet combos, and a number of boost pedals.

• 20 direct (no cab) rigs
• 162 full rigs created with nine cabinets, eight microphones, and six overdrive pedals
• Mutliple patches designed to cover rock, hard rock, and metal styles 

Related Questions and Answers

Q: 1. Will this work in conjunction with my Yongnuo YN622C-TX Wireless flash controller? In other words can I mount this along with my canon 430 EXII strobe?

A: No, that will not work. That bracket is a cold shoe adapter.And the controller to work needs to be attached to the camera via its hotshoe.

Q: 2. Is the middle pin removable?

A: All of the studs are welded in place.

Q: 3. Will this fit an Auray DUSM-1 in the middle coldshoe?

A: Yes the Auray shock mount will fit in the middle, but other items may or may not fit the Vello Shoe Bracket at the same time.

Q: 4. what size will I need to fit a rode videomicro and a mid sized smartphone?

A: Depending on how you choose to mount (order of items), this size should be plenty for the two products you referenced.

Q: 5. Can you remove the knob and use the triple header on a combo stand with a Junior receiver?

A: Yes, the Impact Baby Triple Header has Combo 1-1/8" Pin / 5/8" Receiver for mounting.

Q: 6. Is 4.1 wide from the centers of the 2 top shoe mounts? Would someone please help? Thank you.

A: No, it's 4.1 from the outside edges of the 2 top shoe mounts. It is 3 & 1/4 to the centers of the 2 top shoe mounts.

Q: 7. Can an Ikan 7 monitor be mounted on this bracket, or would it be too big or heavy?

A: Not sure. I have a smallHD 7 inch that works fine with it

Q: 8. How high are the two mounts from the standard center cold shoe? I need to raise a mic so the windscreen is out of the frame.

A: Hi,The tallest one is about 80 mm (3,15 inch) and the lower is about 47 mm (1,85 inch) measured from the bottom of the cold shoe to the bottom of the shoes on each arm.I use a wide angle converter and an old Sony microphone that is not too long and that works fine. As long as you don't use a shotgun microphone it will probably stay out of the frame, but try so simulate it before deciding..!Kindly

Q: 9. What is the distance between each pin?

A: 13 inches between each pin.

Q: 10. I have to ask this question because the contact us page on filmdevices site it's not very responsive.....any instruction manual ?

A: Unfortunately, the manual for the Film Devices Triple-Leg Magnetic Car Mount for Small Camera Rig isn't available on our server.