Add a splash of color to your lighting setup with this blue Pro Gel Sheet from American DJ. These durable plastic sheets are designed for Pinspots and measure 21 x 24". Users can also cut them down to size as needed.

Designed for Pinspots    Produces Vivid Color

Related Questions and Answers

Q: 1. How many different fixtures can it manage?

A: The American DJ Scene Setter 24-Channel Dimmer Board (B&H# AMSS24DIMBD) has 24 channels. As such, it can change 24 different types of settings. You can divide those up as you please among as many fixtures as you like as long as no two fixtures have settings set to the same number if you want each fixture controlled separately. Or you can deliberately have two (or more) different fixtures share the same channels to control them together as a group. For example, 24 separate fixtures using one channel each could be dimmed separately as that would require one function per light (24 fixtures x 1 function = 24 channels). Or 12 fixtures using two channels each could be both dimmed and the second feature (e.g. the speed of a strobe effect if your fixtures have a strobe option) could be adjusted (12 fixtures x 2 functions = 24 channels). Each additional function requires one extra channel per fixture. If there are three functions on each fixture then you can control all such functions on eight fixtures separately (8 fixtures x 3 functions = 24 channels). Any multiplicative combination of fixtures and functions that equals no more than 24 will mean that you can control each function of each fixture separately. (Make sure, however, that fixtures do not unintentionally share two channels. So, if one fixture uses four channels then if it’s set to, say, channel 10, then it’ll take up channels 10, 11, 12, and 14.) In a typical setup, one does not need to control every fixture separately. Rather, two or more fixtures are most often set to the same channel and thus controlled as a group. In such a case, let's say we have several one channel fixtures with only a dimming function (no strobe, etc.) set to channel 12. When we move the slider for channel 12 on the controller then those fixtures will be dimmed as a group at the same time. The same would be true of any other functions that those fixtures may have if they possess additional features such as color, strobe, movement, effect, gobo, and so on.

Q: 2. What is the bolt-thread size for attaching lights?

A: It is a M10 bolt.

Q: 3. What is the footprint diameter?

A: According to the manufacturer, the foot print diameter is approximately 40 inches on the American DJ Pro Follow Spot Stand.

Q: 4. Can these be wall mounted and do they come in white? Looking to use in small church, will be appox.. 20ft from chancel. 15ft high.

A: You could use a wall plate and an TVMP to mount them to a wall. Currently we only have them in black.

Q: 5. Does it carry Phantom Power? No mention of shielding either.

A: This will carry phantom power. Here are more technical specs: • Inner conductor: 4 x 2 conductors / Bare Copper 7 x 0.20 mm (22 AWG) • Number of conductors: 8 • Inner conductor section: 0.22 mm² • Isolation: HDPE 0.95 mm • Conductor twisting: Yes • Outer jacket: PVC • Outer jacket color: Black • Outer jacket diameter: Ø 6.5 mm

Q: 6. What size bolt is that to go into the light? Is it a 1/4 20?

A: The bolt size on this S-Hook is M10.

Q: 7. Is this cable shielded?

A: The American DJ CAT6 Pro Series EtherCON Cable (50'), would be a shielded cable.

Q: 8. Is this a shielded cable?

A: The American DJ CAT6 Pro Series EtherCON Cable (100'), would be a shielded cable.

Q: 9. Can these be controller with a MC 7016 memory lighting controller?

A: No, the American DJ Encore FR20 DTW Dimmable Warm White LED Fresnel is not DMX capable. So, it does not work with the MC 7016 memory lighting controller.

Q: 10. Will this work on a 240V AC socket?

A: The label on the unit shows input to be 120vac, not 120/240vac.