Use this Panasonic DMW-BLF19 Dummy Battery with USB Type-C Input Connector from Bescor to power your Panasonic camera with a USB power source. Built-in to the dummy battery is a USB Type-C connector and cable. The device has internal voltage regulation to protect against damage.

Panasonic DMW-BLF19 Dummy Battery    USB Type-C Connector    Internal Voltage Regulation    Connect Camera to USB Power Sources

Related Questions and Answers

Q: 1. How long is the cable that’s attached to the plate and dummy battery?

A: The cable is approximately 24" from the attached plated to the dummy battery.

Q: 2. Is this compatible with Panasonic VW-VBG6 battery?

A: Hi Alexis. This D-Tap cable is not compatible with the VW-BVG6. Instead, it connects a cinema battery directly to the GH5/GH4/GH3 by way of a D-Tap to dummy battery.

Q: 3. Will you be able to close the door to the battery compartment of the gh6 with this kit?

A: The battery door for the Panasonic GH6 would not close when using this Bescor DMW-BLK22 Kit.

Q: 4. will it work with panasonic g85 and can it be connect to a powerbank? thx

A: The BLF19P-01 will not be compatible with the DMC-G85 because the batteries are different sizes. It will work with Panasonic GH3, GH4, GH5, GH5S, and G9 cameras.

Q: 5. does this come with the ac plug?

A: Yes this unit does come with the AC plug

Q: 6. Can this be used to Power my GH5 from the Ronin RS2 Gimbal?

A: No, the DigitalFoto Solution Limited USB Type-C to Panasonic DMW-BLF19/DCC12 Dummy Battery Coiled Cable (B&H# DIPDDCC12) requires a USB PD 9V/12V power source to produce the appropriate power using its buck module to run a Panasonic Lumix GH5 Mirrorless Camera (B&H# PADCGH5). Unfortuntely, the USB C ports on the DJI RS 2 Gimbal Stabilizer (B&H# DJRONINS2) do not provide power to the needed PD specification.

Q: 7. Does this convert the voltage so that the GH5 does not display a low battery warning?

A: By using this unit there will be no low battery warning display on the camera until the vmount battery is drained

Q: 8. What is the Volts and Amperage outputs? Looking for something between 7.2-7.6 Volts and 2-3 Amperage

A: The Bescor Sony NP-FW50 Dummy Battery with USB Type-C Connector will output 7.2V at 1.02 amps.

Q: 9. Does the full decoding chip allow you to monitor the battery level on the GH4 LCD?

A: It is our understanding that chip will monitor the battery level. Note: this is to be used with the Lanparte Pinch battery.

Q: 10. Will this work with the Panasonic G9?

A: The Panasonic G9 uses the DMW-BLF19 battery system. So yes, this dummy battery should work with the G9 as well.