The FocusONE v2 Follow Focus Unit from edelkrone is a single rod-based follow focus unit that mounts the marking disk between the handwheel and the drive gear, which provides extremely precise focus marks. The v2 model updates the unit with A/B hard stops for even more precise focus movements. The unit features an industry-standard 0.8 MOD drive gear, and the gearbox has an adjustment screw so you can set the tension and play to fit your comfort level. An industry-standard whip/crank socket allows you to use an available speed crank or focus whip if you desire.

The unit can also adjust to accommodate pulling focus with virtually any diameter lens that you can use with a 15mm or 19mm rod. The unit can easily tilt and adjust with your camera setup, and it can be mounted on either side of the lens. The marking disk faces the operator, giving additional confirmation to the operator that the lens is at the proper mark, and it is also lined up precisely with the focus ring for an accurate focus pull. Adjusting the marking disk is simple to do even without a marker by setting the lens where you want it, rotating the disk to the index mark you wish, and then you can change focus back to the mark you set. The marker disk is made from plastic, and you can place additional index marks on it with available temporary markers of your choice.

Single Rod-Mounted Follow Focus    Updated with Adjustable A/B Hard Stops    Works with Almost Any Diameter Lens    Precise Marking Disk Aligns with Ring    0.8 MOD Drive Gear    Multi-Angle Positioning    Custom Tension Adjustments    Works on Either Side of Camera    15/19mm Rod Clamp, Whip/Crank Socket    Aluminum & Steel Construction

Works on either side of the camera

Adjustable hard stops

Custom tension adjustment

Unique design for precision

One Lens Gear PRO included

Compatible with 15 and 19mm rods

Compact and light design

Related Questions and Answers

Q: 1. does this control pan and tilt?

A: Yes, The edelkrone Controller v2 would be able to Pan and Tilt on the HeadOne as an example. The controller V2 also has gesture controls that support Pan and Tilt movement. Manual https://bit.ly/3eF6XGV

Q: 2. this product have all this stuff? 1x Snap-on 15mm to 19mm rods adapter 3x Swing Arms (1:1.0/1:1.5/1:2.0 ratio) 2x Focus Knob/ Handwheel 1x Extension for Focus Knob 5x Module gears (0.8/64T, 0.8/38T, 0.8/43T, 0.6/64T, 0.5/78T) 1x 12 (300mm) Follow Focus Flexible Whip 1x Follow Focus Speed Crank handle 5x Marking discs 1x Hard Carrying Air Tight Safety Case ? or how much cost whit all stuff

A: The Tilta Single-Sided Cinema Follow Focus from ikan is compatible with 15mm and 19mm rod systems. In the Box:1x Focus Knob, not 2x (It wouldn't be Single Side with 2x)1x 15mm to 19mm rods adapter1x Whip1x Crank 4x Marking discs, not 5x3x Gears 1x Swing Arm, not 3xNo Extension, No Case.

Q: 3. Can I use this on the Rokinon 85mm T1.5 DS cine lens ?

A: I see no problem of using the edelkrone FOCUSONE PRO Follow Focus Unit with Rokinon 85mm T1.5 DS cine lens or any cine lens for that matter. Just mount your camera, lens follow focus unit on a 15mm rig and go shoot.

Q: 4. What's the difference between the V1 and V2?

A: The Tilta FF-T04-V2 Dual-Sided Follow Focus Kit is an updated design from the Tilta FF-T04 Film Dual Follow Focus (B&H # TIFFT04), which works the same with some elevated features. The Tilta FF-T04-V2's focus knobs accept ARRI standard accessories, so whips and cranks can be attached at either side. The unit itself has a swing arm design for easy gear placement.

Q: 5. Hi there, do I need anything else for this to work or it will work out of the box with the Revo SR 1500 shoulder rig and a Canon &D Mk II and 24-105 lens? Thanks a lot.

A: You need a lens gear. Get this and cut to size.

Q: 6. Can the unit be operated from the right side of the camera? Will the white disc be visible?

A: Yes, this follow focus has a Built-In Reversing Gear Unit. You will be able to operate it from the left or right side. However if you operate it on the right side, the white disk will be pointing away from the user of the camera.

Q: 7. can I use this if I have a battery pack on my GH5, smallrig cage? with rod of course. Would it reach?

A: Yes, we believe this should still work in that scenerio.

Q: 8. this product have all this stuff? 1x Snap-on 15mm to 19mm rods adapter 3x Swing Arms (1:1.0/1:1.5/1:2.0 ratio) 2x Focus Knob/ Handwheel 1x Extension for Focus Knob 5x Module gears (0.8/64T, 0.8/38T, 0.8/43T, 0.6/64T, 0.5/78T) 1x 12 (300mm) Follow Focus Flexible Whip 1x Follow Focus Speed Crank handle 5x Marking discs 1x Hard Carrying Air Tight Safety Case ? or how much cost whit all stuff ?

A: ikan Tilta FF-T04 Film Dual Follow FocusIn the Box2 x Hand WheelsHand Wheel Extension4 x Marking Disks5 x Drive Gears15mm LWS Support Rod AdapterWhipCrankSafety CaseLimited 1-Year Warranty$1,699.00

Q: 9. Can I use it on the Ivation Pro Steady DSLR Rig System with Shoulder Mount? Or does it work only on rigs with 15mm Rod Systems?

A: This follow focus lists for use with 15mm rods. It is possible to add a 15mm rod baseplate between the Ivation Pro Steady DSLR Rig System and camera. Product example is CAMVATE Baseplate with 7.9" 15mm Rods for Select Canon/Sony Cameras (Red Wingnut) BH #CAC1519 • MFR #C1519. https://bhpho.to/2EUl4mO

Q: 10. this product have all accessories: 1x Snap-on 15mm to 19mm rods adapter 3x Swing Arms (1:1.0/1:1.5/1:2.0 ratio) 2x Focus Knob/ Handwheel 1x Extension for Focus Knob 5x Module gears (0.8/64T, 0.8/38T, 0.8/43T, 0.6/64T, 0.5/78T) 1x 12 (300mm) Follow Focus Flexible Whip 1x Follow Focus Speed Crank handle 5x Marking discs 1x Hard Carrying Air Tight Safety Case ?

A: The ikan Tilta FF-T04 Film Dual Follow Focus comes with these items in the box: 2 x Hand WheelsHand Wheel Extension4 x Marking Disks5 x Drive Gears15mm LWS Support Rod AdapterWhipCrankSafety CaseLimited 1-Year Warranty So no 3x Swing Arms, and 4, not 5 Marking discs.