You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Underwater Kinetics Nitex Pro Eled Rechargeable Fire Safety Helmet Light With Charger (black)

Underwater Kinetics Nitex Pro Eled Rechargeable Fire Safety Helmet Light With Charger (black)
  • Product Code: ga115607
  • Availability: In Stock

$576.00 $771.84

The Class 1, Division 2 certified Nitex Pro eLED Rechargeable Fire Safety Helmet Light with Charger in black from Underwater Kinetics is the smallest and brightest in its class. At 4.6", it is remarkably lightweight yet fully loaded with every imaginable feature—a rechargeable battery, a push-button rear switch for easy use with gloves, and a beam you can depend on again and again.

ULCertified Intrinsically Safe    90 Lumens    Li-Ion Battery, Includes Charger

Key Specs
Lumen OutputProprietary Lithium-Ion:
1 Level: 90 Lumens
Illumination Source1x LED
Estimated Runtime 4 Hour
Battery Type1x Rechargeable Pack Lithium-Ion or
2x CR123A Alkaline
General
Lumen OutputProprietary Lithium-Ion:
1 Level: 90 Lumens
Illumination Source1x LED
Weapon MountableNo
Power
Estimated Runtime 4 Hour
Battery Type1x Rechargeable Pack Lithium-Ion or
2x CR123A Alkaline
Internal Battery Capacity2200 mAh
Charging Time4 Hours
Physical
Material of ConstructionABS Polycarbonate, Aluminum
Environmental ResistanceWater-Resistant to 9.8' / 3 m (IP67)
Impact ResistanceNo
DimensionsH: 1.4 x W: 1.4 x L: 4.6" / H: 3.6 x W: 3.6 x L: 11.7 cm
Weight3.6 oz / 102 g

  • CL I, II, III DIV 2 GROUP A-D, F, G

  • Proprietary Compound Path Optics (CPO) permits high efficiency and compact size
  • Thermal Recovery System recycles heat from the LED to warm batteries for improved performance in low temperatures
  • Beam pulses briefly to indicate low battery level (below 10% capacity)
  • Large push-button switch works with heavy gloves
  • UK helmet mounting clips easily attach the light to any hard hat or fire helmet

Related Questions and Answers

Q: 1. Are replacement lav mics available for this unit?

A: Replacement microphones may be obtained by contacting Pyle Pro directly:Pyle ProTel: 800-444-5671Email: support@a href= http://pyleaudio.com target= _blank pyleaudio.com/aWebsite: a href= http://www.pyleaudio.com/ target= _blank http://www.pyleaudio.com//a

Q: 2. How long is the wire from the microphone to the speaker?

A: The wire from the microphone to the speaker 11.5ft

Q: 3. Would this charger work with the Blackmagic Design 3500mAh Li-Ion NP-F570 Compatible Battery Blackmagic Design 3500mAh Li-Ion NP-F570 Compatible Battery for the BMPCC 6K Pro? Thanks

A: The Blackmagic Design 3500mAh Li-Ion NP-F570 Compatible Battery is an L-series battery that will work great with the Watson Duo LCD Charger for L & M Series Rechargeable Batteries.

Q: 4. can you charge Anton Bauer battery with this charger?

A: Yes. The Watson Duo LCD Charger for L & M Series Rechargeable Batteries will charge L & M Series Rechargeable Batteries made by Anton Bauer and many other companies.

Q: 5. Can both microphones be used at the same time? Two inputs?

A: You can use both microphones simultaneously. The lavalier is wireless; and the handheld mic is connected to the speaker with a cable.

Q: 6. How I can visually distinguish the new MFR #DX-4203 from the old MFR #D-4203 ? Is there any label information on the charger's body?

A: The Watson Duo LCD Charger for L & M Series Rechargeable Batteries (#DX-4203) that replaces the older (D-4203) wiil not bear a difference in physical appearance and will operate the same.

Q: 7. If I am charging my PWMA200 Amplifier, I plug into an AC outlet and keep power switch in neutral position or charge position?

A: The Pyle Pro PWMA200 can be used while charging. The power switch may be either in the on or off position while charging the battery.

Q: 8. I have noticed that the charger (DLC) displays different battery capacity depending on charging bay used: right and left. For example: same battery shows 100% capacity when tested in the right charging bay but it shows only 95% when it tested in left charging bay. It means the left bay will never give a 100% capacity? What is the reason for this inconsistency?

A: It could be the read out for that particular bay on your unit. If the battery read out doesn't reach 100 percent over time, please send an email to cs@bhphoto.com with your order number on the issue.

Q: 9. How long it takes to full charge a watson NP-f770 ( 4400mah)?

A: The Watson Duo LCD Charger for L & M Series Rechargeable Batteries will fully charge the Watson NP-F770 Lithium-Ion Battery Pack (7.4V, 4400mAh), B&H # WANPF770, in approximately 2 hours.

Q: 10. Where do you install the 9V battery on the microphone? Isn't the microphone supposed to be wireless??

A: The microphone isn't wireless, it's corded with a plug directly to speaker, the headset w/microphone is wireless. the 9v goes in the headset.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Bescor Usb Charger For Li-92b Battery

$89.97 $132.26

Fenix Flashlight Are-d1 Battery Charger

$44.85 $59.65

Olympus Bcs-5 Lithium-ion Battery Charger

$146.85 $193.84

Products You May Like

9.solutions Grip Rigging Bag (black)

$749.97 $929.96

Tiffen 2 X 2" Black Diffusion/fx 4 Filter

$463.50 $667.44