The Obsidian NX 2-Port DMX Node is USB powered. As a member of the innovative ONYX platform from Obsidian Control Systems, the NX DMX provides instant access to DMX in and outputs, as well as RDM communication. The device is plug-and-play and requires no drivers or additional configuration to integrate with ONYX. It is designed to work with any PC but also works with any ONYX console as a fast and affordable way to add two additional DMX ports. The NX DMX enables the ONYX NOVA PC license for up to four universes. When connected to an ONYX licensed PC or ONYX console, the NX DMX is assignable to any one of 255 universes.

The NX DMX allows the full ONYX system to be used in many situations, from small events and tradeshows to clubs and churches. Many technicians utilize ONYX through the NX DMX as an affordable but powerful test station due to ONYX's outstanding library support.

USB for ONYX OS Lighting Console    Works with Any PC    40GB Available Disk Space for Software    Art-Net DMX Output port for X-Net    Remote Operation and sACN

• Windows 10/11 64-bit (home/pro/enterprise)
• Intel Core i3 processor 6th Generation+ (or other comparable multi-core processors)
• 8GB RAM
• SSD storage drive
• 40GB available disk space for software, DYLOS factory content, and storage
• Widescreen monitor, minimum 1280 x 768 (capacitive multi-touchscreen recommended)
• USB 2.0 port for Onyx Key and optional USB to DMX devices
• 10/100 Ethernet port for Art-Net DMX output
• 100/1000 Ethernet port for X-Net, remote operation, and sACN
• NX DMX is also compatible with Elation LightJockey 2 software

• Two DMX/RDM universe in/out: 5-pin locking XLR
• USB in: USB 2.0

Related Questions and Answers

Q: 1. can you hook up multiple lights to this to control at once?

A: Yes, you can connect multiple devices to the Aputure Sidus One Wireless DMX Transceiver at once. Devices connected to the Aputure Sidus One Wireless DMX Transceiver must have the necessary hardware to connect to the Sidus One, whether it is a built-in module or an add-on receiver.

Q: 2. what is network protocol, will this unit work with a unmanaged switch?

A: The Obsidian Netron EP4 Ethernet to DMX 4-Port Gateway can work with managed or unmanaged switches.

Q: 3. Is there the choice to operate this device either over ethernet, or USB?

A: The Obsidian Netron EP4 Ethernet to DMX 4-Port Gateway is controlled via either net. The usb is for power only.

Q: 4. Can I use a 5 pin to 3 pin adapter without issue?

A: No, a 3-pin adapter will not work properly with the ENTTEC DMX USB Pro.

Q: 5. Can you use this with Luminair or blackout?

A: Aputure's Sidus One Wireless DMX Transceiver is a battery-powered single-universe transmitter and receiver for CRMX, DMX512, RDM, Art-Net, and sACN protocols, designed to expand the breadth and scope of Aputure's DMX console, the Sidus Link Pro app. It will connect to Lumenaire but not Blackout.

Q: 6. Does this enable controlling Sidus Link via Artnet?

A: Yes, the Aputure Sidus One Wireless DMX Transceiver is Artnet compatible.

Q: 7. Is it Mac compatible?

A: Yes, the SoundSwitch Micro-DMX Interface is bot Mac and PC compatable.

Q: 8. Will this work with the amaran 1' 2' and 4' tubes?

A: Yes, the amaran PT4c RGB LED Pixel Tube Light (4'), the amaran PT2c RGB LED Pixel Tube Light (2'), and the amaran PT1c RGB LED Pixel Tube Light (1') have USB-C ports and can be controlled through DMX with the following cable: the Aputure USB-C to DMX Adapter (Single).

Q: 9. Can this be managed with a MacBook?

A: The Obsidian Netron EP4 Ethernet to DMX 4-Port Gateway is controlled via IP. So it can work with a Mac or Windows machine.

Q: 10. Can sidus bluetooth mesh lights be controlled simultaneously with CRMX lights? As if they are in the same universe

A: Yes, with the Aputure Sidus One Wireless DMX Transceiver, you would be able to simultaneously control Bluetooth mesh lights and CRMX lights. The Sidus Link Pro app should be used to handle all connections and transmissions between the lights.