Designed for universal compact/subcompact rails, the Surefire XSC Micro-Compact Weaponlight delivers bright white light that reveals potential threats and provides confidence in targeting. Measuring less than 2" and weighing under 2 ounces, the XSC emits 350 lumens shaped by a parabolic reflector for a bright center beam with ample spill light for further situational awareness. The ambidextrous push-button switch provides momentary and constant-on control, and the 3.7V LiPo battery can be swapped out for a fresh one and recharged in the included charging dock. Runtime on a full charge is 30 minutes, and a "fuel gauge" on the battery assures you won't be caught without power. The light's aluminum housing is rated IPX7, meaning it is waterproof and submersible to 3.3' for 30 minutes.

Designed for Concealed Carry Handguns    350 Lumens    0.8" Bezel    Ambidextrous Switching    Momentary and Constant-On Modes    Removable, Rechargeable LiPo Battery    Aluminum Housing, IPX7 Waterproof

• 350-lumen white light output
• Parabolic lens system produces a bright center beam with generous spill to maintain situational awareness
• Runtime on a full charge: 30 minutes

• Ambidextrous toggle switch
• Momentary and constant-on activation

• 0.8" diameter bezel
• Removable and rechargeable LiPo battery with status indicator
• Charging dock has two bays for swapping in an optional second battery
• Lightweight aluminum alloy housing
• Scratch and corrosion-resistant black Type III hard anodized finish
• IPX7-rated waterproof & submersible to 3.3' for 30 minutes

Related Questions and Answers

Q: 1. Does this fit Yongnuo flashes?

A: Many of the Yongnuo flashes that accept a battery use a Canon type connector. That being said, the Bolt Universal Compact Battery Pack for Canon, BH # BOCBPUCPCK would be the correct option to use. https://bhpho.to/3JrAQ8e

Q: 2. Will this work with the nikon sb-910 flash?

A: You will need the following cord to connect Bolt Universal Compact Battery Pack to your Nikon SB 910 flash. Bolt CBP-UN Power Cord for Nikon Hot Shoe Flashes BH #BOCBPUN • MFR #CBP-UN https://www.bhphotovideo.com/c/product/1619789-REG/bolt_cbp_un_nikon_power_cord_for.html

Q: 3. Which Novoflex ring is needed to attach a standard M39 enlarger lens to this bellows? Is whatever ring that is also the same adapter to attach an M39 lens to the Novoflex Castbal Tilt-Shift Bellows #NOBACQ ?

A: Novoflex makes many lens adapters for the Novoflex Universal Compact Bellows. They do not seem to make one for M39.

Q: 4. I have a Bolt Cyclone DR PP-400DR Dual Outlet Power Pack for my Lumix/Olympus camera...It looks like the power connection at the battery back would accept "my cable" in to the power unit and the connector for my GoDox 685 "O" would then be fine?

A: The Godox TT685O uses the same high voltage battery connector as Canon, so you can use the DR PP-400DR Dual Outlet Power Pack or this Bolt Universal Compact Battery Pack.

Q: 5. Does this work with Leica?

A: The Bolt Universal Compact Battery Pack is compatible with Sony, Canon, and Nikon, but not with Leica.

Q: 6. Does it fit Nikon SB700?

A: Yes this is compatible with the SB700.

Q: 7. How do I connect it to Beringer X Air XR16?

A: Using a MIDI cable (i.e.B&H # HOMM10), connect from the MIDI OUT of the X-TOUCH into the MIDI IN of the X Air XR16. You will probably need to make some parameter adjustments to the internal software of the X-TOUCH as it is primary purpose was not to be used with the XR16. Connect the X-TOUCH to a PC via USB, and use the edit software for the device to change the parameters to match controls functions on the XR16. Once you have done this, dump the software modification into the X-TOUCH and then proceed o connect the two devices with the MIDI cable.

Q: 8. Does this pack work with Quantum and Godox cables for Canon and Nikon flashes? I have the Metz 58 AF 2 and no Bolt cable is offered , but will the Godox 58 cable or the Quantum CM-58 work with this pack?

A: The Bolt Universal Compact Battery Pack would not be compatible for use with Godox or Quantum Instruments power cables. It would only be compatible for use with the dedicated Bolt UN Power Cords listed under the Accessories tab on our website.

Q: 9. Will this work with Adobe Premiere Pro CC?

A: It will not map Adobe premier Pro CC. It will work with a DAW (audio). It's designed to provide you with hands-on control over your DAW and MIDI controllable instruments via Mackie control protocol.

Q: 10. Can this be used on a Nikon SB800 flash?

A: Yes. The following unit will accept power packs.