Adding higher SPLs and even more remote functionality than its predecessor, the STAGEPAS 1K mkII Portable PA System from Yamaha boasts the same combination of lightweight design, professional mixing functions, and simple operation that has made the STAGEPAS series a standout in the portable PA market. The mkII couldn't be easier to carry and set up, with a mixer-integrated subwoofer and two-segment J-curve line array that can be assembled in seconds and produce enough volume and room coverage to facilitate a wide range of venues, from small coffee shops and clubs, to moderate-sized stages.

The STAGEPAS 1K mkII sports an advanced digital mixer with a useful ducking function for speech over background music, 1-knob EQ adjustment for performing multiple EQ processes simultaneously, and MODE selection, which allows you to adjust optimized compression settings like Speech, Club, or Music modes to match numerous applications. Expanded Bluetooth functionality allows you to use the STAGEPAS Controller app to wirelessly control your volume, 1-knob EQ, or 4-band PEQ during rehearsal or performance, even providing shorter set up times by saving and loading settings on a per song or application basis.

Open Box Products Have a Limited 3-Year Manufacturer Warranty    J-Curve Slim Line Array Design    10 x 1.5" HF Drivers, 1 x 12" Subwoofer    1100W Max Amplification    Class-D Amplifier Circuit    37 Hz to 20 kHz Frequency Response    3 x Combo XLR-1/4" In, XLR Link Ports    Lightweight and Easy Setup    Yamaha Twisted Flare Port Technology    Durable ABS and Polyurea Cabinet    Remote Edit via STAGEPAS Controller App

The high-frequency section of the system is composed of 10 small-diameter, 1.5" speakers arranged in a curved, J-shaped line array. This design configuration allows the system to achieve a vertical coverage of 30° across a span of 170°. The long, 10-driver array can deliver clean, clear, and high-quality sound consistently over long distances, projecting uniform sound from the front to the rear of the audience.

The STAGEPAS features a 12" subwoofer that is, in fact, the largest in its class. Despite the large 12" speaker, the subwoofer sports the smallest cabinet on the market for a subwoofer of this size and power. This means that the speaker delivers massive low-end power while taking up a minimal amount of precious real estate on stages. By incorporating Yamaha's Twisted Flare Port technology to reduce port wind noise that often plagues compact bass-reflex subs, the low-frequency output is maximized, producing very deep, powerful, distortion-free bass.

With 1100W of Class-D amplification, the STAGEPAS 1K mkII can deliver an impressive 125 dB SPL from its surprisingly compact speaker cabinet. Yamaha has leveraged their decades-long experience as a manufacturer of professional PA products, ensuring that with great power comes great stability. The DXL1K maintains the same accurate, high-quality sound, even at very high output levels.

Related Questions and Answers

Q: 1. Can you record from the mixer itself? If not, can you run the signal to an external recorder?

A: The Yamaha STAGEPAS 600BT Portable 10-Channel PA System with Bluetooth does not have a recorder built in. You could use the two (2) 1/4" TRS monitor output connectors to patch a digital recorder in.

Q: 2. Will this fit the older StagePas 500 system?

A: No, the Yamaha StagePas 600i speakers are smaller than the StagePas 500 speakers so the Yamaha Soft Rolling Carry Case for StagePas 600i Portable PA System is not going to fit the StagePas 500 system.

Q: 3. Hello Is this open box Yamaha Stagepass been inspected there at the shop or warehouse?

A: The Yamaha STAGEPAS 1K mkII 1100W 2-Way Portable PA System with Bluetooth is brand new; Boxed, sealed and shipped to B&H directly from Yamaha and it comes with a 3 year manufacturer warranty from Yamaha which you can find listed in the 'In The Box' section of the product page, located on your far right-hand side of the Overview Tab.

Q: 4. Can Yamaha Stagepas 400BT be connected to a Yamaha CBR10 (passive) speaker?

A: Yes, you can use the Yamaha CBR10 Portable 2-Way 10" 700W Passive Loudspeaker with the Yamaha STAGEPAS 400BT Portable 8-Channel PA System. You can connect the CBR10 speakers to the 1/4" main outputs or to the 1/4" monitor outputs on the STAGEPAS mixer.

Q: 5. Can I set the mono monitor levels? I want to record out of the speaker.

A: Yes you can just use the 1/4" mono out to monitor.

Q: 6. Will this case work for the new BT model?

A: Thank you for your question. This bag set will fit the Yamaha STAGEPAS 600BT perfectly.

Q: 7. What type woofer magnet on Pyle Pro HP1535 WMU, THANKS

A: Hi, Thank you for reaching out. 5 magnet and 12 cone

Q: 8. Does this package come with two speaker stands?

A: Yes, there are two Auray SS-4320 Lightweight Aluminum Speaker Stands (B&H # AUSS4320) included with the package.

Q: 9. does this fit the yamaha msr400 speaker?

A: Its a near miss.

Q: 10. Can I connect Yamaha CBR10 together with the Yamaha StagePas 400BT (i.e., all 3 speakers at the same time)? If so, how?

A: The Yamaha CBR10 Portable 2-Way 10" 700W Passive Loudspeaker (B&H # YACBR10) is not compatible for direct connection to the Yamaha STAGEPAS 400BT Portable 8-Channel PA System because it is a passive speaker. You will need to use a separate power amp to power the CBR-10 and then you can connect the left (mono) 1/4" Monitor Output jack on the STAGEPAS mixer to the input on the power amp. Otherwise, you can use a powered speaker instead of the CBR10, such as the Yamaha DBR10- 10" 2-Way Powered Loudspeaker (B&H # YADBR10) or the Alto Professional TX310 350W 2-Way Powered Loudspeaker (B&H # ALTX310), which can be connected directly to the mixer's Monitor Output jacks.