The white Audix M45 is a miniaturized shotgun condenser microphone designed for installation in conference rooms, lecture halls, classrooms, and other public meeting spaces. Optimized for vocal intelligibility and featuring a swivel-and-pivot base for convenient aiming and positioning, the microphone can cover an area approximately 10 to 15' wide and up to 25' deep according to the the acoustics of your room.

The M45 offers high sensitivity, an integrated preamp, immunity from RF interference, and is easy to install in a 1-1/2" hole with no additional tools required. Mic-level signal and LED control is over an RJ45 connection. An adapter is included to convert from RJ45 to an 8-conductor pluggable terminal block. For use in Dante networks, the optional Audix DN4 Enhanced Onramp for

Dante | AES67 supports up to four devices and includes LED logic control.

The M45 microphone is designed, machined, assembled, and tested by Audix in Wilsonville, Oregon.

Conference Room, Lecture Hall, Classroom    Optimized for Voice Intelligibility    Swivel-and-Pivot Base for Aiming    Immunity from RF Interference    Audio Signal LED Control over RJ45 Port    Plugs into Mic-Level Input    Requires Phantom Power    RJ45 to 8-Conductors Phoenix Adapter    Machined, Assembled, Tested in the USA

• The M45 is a low-impedance microphone and should be plugged into a mic-level input on your conferencing system, mixer, or recording device.
• The mic requires phantom power and does not operate without phantom power voltage (18 to 52 VDC), which is available on most professional mic preamps and mixing devices.
• If phantom power power is not available on your equipment, use an external phantom power source such as the Audix APS2

• Easy to install and aim
• For rooms 10 to 15' wide and up to 25' deep
• Miniaturized shotgun design with supercardioid polar pattern
• Optimized for vocal intelligibility
• Integrated preamp for high sensitivity and low noise
• Immunity from RF interference
• Rugged aluminum and brass construction

Related Questions and Answers

Q: 1. Can this connect to the Elgato HD 60X?

A: No, the Elgato Wave:3 USB Microphone is not compatible for connection to the Elgato HD60 X Game Capture Card. The HD60 Capture Card has a 3.5mm TRS input for an analog microphone. The Elgato Wave:3 USB Microphone is intended for direct connection to a computer.

Q: 2. can this microphone work with a third party DSP? ie does it have a balanced audio output?

A: no this does not have a balanced audio output

Q: 3. Can we use a 4 pin mini-xlr to 3 pin XLR and plug it into a standard audio console? Wouldn't that work?

A: It would be best to stay with the enclosed rj45 to xlr male connections. These provide the ability the run long cable runs, and ensures powering of each capsule is done properly.

Q: 4. To keep out of my shot, how far away can this be placed from the subject? For a one person indoor interview.

A: The Audix SCX1-HC can be placed at around 5 feet away from the person talking, at the very most.

Q: 5. Does this come with any mounting gear?

A: We're afraid not. This is a microphone arm only and it requires an O.C. White mount for complete assembly onto a flat surface or wall.

Q: 6. Does it work with nintendo switch?

A: Yes, the Elgato Wave:3 USB Microphone is compatible for use with the Nintendo Switch.

Q: 7. Would this mic work ok for streaming? I'd like to not have the mic on screen and be able to move my head a little. Also would it pick up a lot of the speaker audio? I don't want to use headphones if I can get away with it.

A: I can't imagine a problem with streaming. As for picking up your monitor audio, that's a bit tricky to answer without seeing your recording space. I'm guessing that some noise reduction to reduce your monitor audio bouncing back and having the monitors behind the mic should result in a clean sound without picking up the monitors... but this would be true for any mic that's not omnidirectional. We use this mic at about 3 feet from two people talking and it's awesome... we don't use the monitor. If money's not a limiting factor, this mic also has different heads that support different patterns..

Q: 8. Is this comparable with the Audix HT2 -Condenser Headworn Microphone?

A: This kit comes with the Audix HT2 condenser headworn microphone.

Q: 9. Can I install 2 of these units in the same room for improved coverage?

A: Multiple Sennheiser TeamConnect SL Ceiling 2 Microphone Array with Extension Brackets (BH # SEUSTCC2KTK) may be used in large spaces.

Q: 10. What would be required to get a XLR audio output from this system? I currently have a qu32 with 18 + desk mics going into it. Is it feasable to get rid of the desktop gooseneck mics and use this system for audio input to the mixing board?

A: The Sennheiser TeamConnect SL Ceiling 2 Microphone Array with Extension Brackets BH #SEUSTCC2KTK will connect directly to external microphones. Please see the manual below for connection options and installation guidance: https://www.bhphotovideo.com/lit_files/762696.pdf