Use your Sony a7 IV camera to capture photos and video in the surf, at the pool, or in any other aquatic environment with the AquaTech EDGE Pro Water Housing, in orange. The EDGE Sports housing features a depth rating of 33' and offers tactile push-button controls for accessing important camera functions, and its small profile and ergonomic design allow for easy handling in the water.

The EDGE Sports housing is compatible with AquaTech's P-Series lens ports, and a port is required for use of the housing. A glass eyepiece provides a clear view of the camera's electronic viewfinder. The housing has a standard left-side grip and a right-side palm stopper, which helps steady the unit when shooting video. The palm stopper can be replaced with an optional standard right-side handle. The quick release back plate is self-guided, so you'll know your controls are lined up properly. This housing is also compatible with the AquaTech M3 Pistol Grip.

Depth Rating: 33'    Slim Form Factor for Ease of Handling    Tactile Push-Button Controls    Compatible with P-Series Ports    Glass Eyepiece for Best View of EVF    Right-Side Palm Stopper    Stainless Steel/Anodized Aluminum Parts    Polyurethane Body    Lens Port Required

• Depth rating of 33'

• Compatible with AquaTech P-Series lens ports (lens port required for operation)
• Ergonomic design with left-side grip and right-side palm stopper
• Compatible with AquaTech M3 Pistol Grip
• Provides access to the following camera functions via mechanical, push-button controls on the housing backplate: menu, C3, record, rear top dial, AF-ON, AEL, FN, multi control pad (left & right), rear control wheel, center button, playback, dual shutter buttons

• Made from durable polycarbonate
• Controls made of stainless steel and hard-anodized aluminum
• Self-locating quick release back plate
• Four quick release clips

Related Questions and Answers

Q: 1. does it fit both r5 and r6?

A: AquaTech EDGE Base Water Housing for Canon R6 (Orange) will only fit the Canon EOS R6. AquaTech EDGE Base Water Housing for Canon R5 (Orange) BH #AQ10323 • MFR #10323 is for Canon EOS R5.

Q: 2. Is it Compatible with the a7iv? On the compatible list, I don't see a7iv amongst it. But the naming on the item has a7iv attached to it.

A: Yes, The Tilta Pro Camera Cage Kit for Sony a7 IV (Black) is exclusively made for the Sony A7IV camera.

Q: 3. Dear B&H, Thank you very much for answering my previous question... What Adapter and Lens port for "FUJIFILM GF 80mm f/1.7R WR"

A: To use the FUJIFILM GF 80mm f/1.7R WR Lens in the AQUATECH EDGE MAX Pro Housing for FUJIFILM GFX100 II, you need the AQUATECH XF-55 Lens Port (6"), BH #AQXF55, and the AQUATECH X-50A Adapter, BH #AQ10826.

Q: 4. I see there is a manual zoom mechanism, is there a way to also manual focus the lens?

A: We do not offer manual focus gear. If you're using Sony lenses and cameras, you can set focus with autofocus, and then use the camera to put the lens into manual focus. It is not possible to rack focus manually however.

Q: 5. Recommended lens port and focus ring for FUJIFILM GF 110mm f/5.6 T/S Macro Lens

A: Unfortunately, Aquatech does not have a lens port or focus ring designed for using the FUJIFILM GF 110mm f/5.6 T/S Macro Lens (FUJIFILM G) with the FUJIFILM GFX 100II Medium Format Mirrorless Camera inside the AQUATECH EDGE MAX Pro Housing for FUJIFILM GFX100 II. I see no lens ports for tilt/shift lenses. If you wish to use a macro lens underwater with the AQUATECH EDGE MAX Pro Housing for FUJIFILM GFX100 II, the FUJIFILM GF 120mm f/4 Macro R LM OIS WR Lens, B&H # FU1204LMWR, would be a recommended macro lens with a similar focal length. The above lens would use the AQUATECH X-100A Adapter, B&H # AQ10831, and the AQUATECH XF-55 Lens Port (6"), B&H # AQXF55. https://bhpho.to/3TzPakC https://bhpho.to/3zgjMlg https://bhpho.to/45CBZ8A

Q: 6. Do I need to remove cage to change battery

A: Nope. You will be able to swap batteries without removing the cage.

Q: 7. Does this price include the shown lens port?

A: Lens ports need to be selected based on the users lens and will vary from person to person, hence we do not include a standard lens port with our housing offerings.

Q: 8. Can you attach a monitor on this cage?

A: Yes, You can attach arms that could hold a display to the many mounting points on the Tilta Pro Camera Cage Kit for Sony a7 IV, or use the shoe mount on the top of the handle. Also there are show mounts and mounting points on the top handle that could work with Monitor mounts that hold the dislay on cage. Monitor mount idea: Tilta Adjustable Cold Shoe Accessory Mounting Bracket (Black) BH #TIAAMBB

Q: 9. Is this cage compatible with the Sony a7iii?

A: Yes, the Tilta Pro Camera Cage Kit for Sony a7 IV will also work and support the Sony A73.

Q: 10. Will an A7IV fit/work in this housing?

A: According to Aquatech, the AT Base for the A7III, A7SIII, A7RIII, A7RIV, A9/A9II is not compatible with the A7IV.