Unlock exceptional SSD performance and versatility with the 1TB PRO-BLADE SSD Mag from SanDisk Professional. Designed to work with the PRO-BLADE modular ecosystem, this NVMe PCIe 3.0 SSD features a storage capacity of 1TB and is compatible with the PRO-BLADE TRANSPORT, where it delivers read speeds of up to 2000 MB/s, or the PRO-BLADE STATION, where it can achieve read speeds of up to 3000 MB/s. Preformatted for the APFS file system with macOS 10.13 and later, the PRO-BLADE SSD MAG may also be reformatted for use with Windows 10 and later. To further protect your data, the PRO-BLADE SSD MAG can withstand drops from up to 9.8' on a carpeted concrete floor and has a crush resistance of up to 4000 pounds.

1TB Storage Capacity    NVMe PCIe 3.0 Interface    Read Speeds up to 3000 MB/s    Compatible with the PRO-BLADE TRANSPORT    Compatible with the PRO-BLADE STATION    Can Withstand Drops up to 9.8'    Crush Rating of up to 4000 Pounds    Preformatted APFS for macOS 10.13+    Windows 10+ Compatible with Reformatting

Tap into the exceptionally versatile SSD ecosystem powered by the ultra-interchangeable PRO-BLADE SSD mag that empowers you to upgrade your workflow.

The PRO-BLADE modular SSD ecosystem enables you to scale up and transport as many terabytes as you need without dealing with bulky gear.

Pair with the portable PRO-BLADE TRANSPORT enclosure for fast transfer speeds of up to 2000 MB/s and seamless storage access when swapping mags on the go.

Stack up to 16TB of total capacity when you load four PRO-BLADE MAG SSD devices into the PRO-BLADE STATION desktop enclosure for simultaneous offloading at speeds of up to 3000 MB/s.

Carry more capacity with less bulk when you pack multiple compact PRO-BLADE SSD mag devices into the PRO-BLADE TRANSPORT or PRO-BLADE STATION.

Each PRO-BLADE SSD MAG is encased in an aluminum exterior to help sustain fast speeds during heavier usage.

Connect to macOS 10.13 and later right out of the box in APFS format, or reformat for compatibility with Windows 10 and later.

Related Questions and Answers

Q: 1. Will this be compatible with the new Pro Dock?

A: This SanDisk Professional 1TB PRO-BLADE SSD MAG is compatible with the SanDisk PRO-BLADE Station and Transport.

Q: 2. Can it fit my existing NVME's ? To use it with SanDisk pro-blade station?

A: The SanDisk Professional 1TB PRO-BLADE SSD MAG already has a NVMe drive installed and is not made to use with other NVMe drives.

Q: 3. How difficult is it to reformat for windows 10?

A: The SanDisk Professional 4TB Professional PRO-BLADE STATION Kit with PRO-BLADE SSD Mag (4 x 1TB) BH #SAPBST1K can be formatted for Windows OS.

Q: 4. Is the SanDisk pro blade station and transport compatible with all the different blade capacity SDD mags?

A: The SanDisk Professional 8TB Professional PRO-BLADE STATION Kit with PRO-BLADE SSD Mag (4 x 2TB) BH #SAPBST2K comes with 4x 2TB blades but is compatible with other sizes as well.

Q: 5. I assume that since this mounts each blade as a single drive (rather than as RAID might), this is fully compatible with Apple M1 chips? Is that a correct assumption?

A: Yes, that is correct. Each SanDisk Professional 4TB PRO-BLADE SSD MAG will function as a separate unit. Even if you purchased the multi bay unit, the array will work as JBOD for maximum swapability.

Q: 6. How is this different than plugging in 4 external ssds into my computer? It's not a RAID enclosure

A: The SanDisk Professional 4TB Professional PRO-BLADE STATION Kit with PRO-BLADE SSD Mag (4 x 1TB) will allow you to use one cable to connect this to a computer versus needing four separate connections for 4 SSDs.

Q: 7. Blackmagic Design recommends the SanDisk Professional 4TB PRO-BLADE SSD Mag but not the Transport. So how can you connect it?

A: The SanDisk Professional 4TB PRO-BLADE SSD Mag has a NVMe PCIe 3.0 interface, so it will have to be connected your Blackmagic device using the SanDisk Professional PRO-BLADE TRANSPORT (BH #SAPBT). This is the same way in which Blackmagic would have connected the SanDisk Professional 4TB PRO-BLADE SSD Mag to their devices when they tested of the drive.

Q: 8. Can the Pro Blade be adapted to insert into the Pro Dock 4?

A: The SanDisk Professional PRO-BLADE SSD Mag can not be adapted to work with the SanDisk Professional PRO-DOCK 4 (BH #SAPD14F0000N).

Q: 9. If connected to a Mac Studio, will the Mac Studio see these as four separate drives, or as a single drive?

A: The SanDisk Professional 8TB Professional PRO-BLADE STATION Kit with PRO-BLADE SSD Mag (4 x 2TB) BH #SAPBST2K would mount in macOS as four independent drives.

Q: 10. Will this device ever be able to use 8TB blades, for a total of 32TB?

A: Regarding the SanDisk Professional 16TB Professional PRO-BLADE STATION Kit with PRO-BLADE SSD Mag (4 x 4TB), at this time, SanDisk does not make an 8TB version of the PRO-BLADE SSD Mag.