Use this V-mount Dual Battery Plate Cradle from Wooden Camera to power and store your Teradek Bolt LT transmitter between your camera and battery. The cradle is dual-sided with a V-mount receiver to attach a battery and a V-mount battery to secure to your camera, while transmitting SDI video simultaneously.

Three D-Tap ports on the battery side can power your transmitter or other accessories at 12-16V and includes a digital fuse with reset button. A 1/4"-20 screw inside the cradle secures the transmitter inside to deliver 4K 12G-SDI video to your Bolt LT receiver unit. The cradle helps keep your camera's gear configuration compact and has two openings at the bottom, one for USB access and the other for ventilation.

For Bolt LT Transmitter    Dual-Sided Battery Plates    3 x D-Tap Ports    1/4"-20 Screw Secures Transmitter

Related Questions and Answers

Q: 1. Hello, will this fit the new Teradek 6 LT series either the 1500 & 750 receivers?

A: No, the Teradek Bolt 1000 LT and 500 XT RX Battery Plate will not support the Teradek 6 LT. Please work with the plates listed below. The plates below will work with the 1500, and 750 Transmitter, or Receiver. Female Battery side V-mount: Teradek Single-Battery Plate for Bolt (Female, V-Mount) BH #TE110854 Male Camera side: Teradek V-Mount Battery Plate for Bolt 4K Monitor Module (Male, Camera Side) BH #TE110855

Q: 2. Will this fit the Bolt 6 XT?

A: Yes, This Wooden adapter would work with other Teredek Transmitter models like the Bolt 6 XT.

Q: 3. Is there a way to mount and power an older bolt 500xt TX with this?

A: The Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (V-Mount) (B&H# WOA00054) may be used with the Teradek 2-Pin LEMO to P-Tap Cable (18") (B&H# TEBIT118, https://bhpho.to/3VcABCR). Together, they will pass appropriate power from V-mount batteries to the Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver (B&H# TE101937): https://bhpho.to/3HOJdwr

Q: 4. will this work with a c500mkii with the EUV2 expander module?

A: Yes, the Core SWX Helix Caddy for Teradek Bolt LT Transmitter (V-Mount) is compatible with the Canon EU-V2 Expansion Unit 2 on the Canon EOS C500 Mark II 5.9K Full-Frame Camera Body (EF Mount, No CFexpress Card).

Q: 5. I see it didn't work for someone with a c500 mkii? Will it work for someone with the CANON EU-V2 EXPANSION UNIT 2 ?

A: Yes, the Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (V-Mount) is compatible with the Canon EU-V2 Expansion Unit 2.

Q: 6. Will this fit the updated Bolt 6 LT TX? I have the HDMI version

A: The dimensions on paper would appear to work for housing the newer Teradek Bolt 6 LT series TX. We will not be able to test this unfortunately.

Q: 7. will this work with a CANON EU-V2 EXPANSION UNIT 2 on a c500mkii?

A: Yes, the Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (V-Mount) is compatible with the Canon EU-V2 Expansion Unit 2 on the Canon EOS C500 Mark II 5.9K Full-Frame Camera Body (EF Mount, No CFexpress Card).

Q: 8. How is the power transferred to the Bolt TX itself? Is a jumper cable needed? I assume the passthrough runs through the bottom.

A: Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (Gold Mount) needs a standard D-Tap to 2pin cable to power the Bolt. You can use this. Teradek 2-Pin LEMO to P-Tap Cable (11") BH #TE110109 • MFR #11-0109.

Q: 9. Will this work on the RED V-Raptor?

A: Regarding the Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (V-Mount to Gold Mount), we see no reason it would not work with the RED DIGITAL CINEMA V-RAPTOR.

Q: 10. Would DJI Transmission fit in this cradle?

A: The Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (Gold Mount) is intended only to fit the Teradek Bolt LT, which would fit snuggly into the unit. We do not recommend using it with any other units, as they would not properly fit.