Designed to deliver stellar audio performance and versatility for intensive audio applications, the 15" RCF ART 915-AX is a highly flexible, easy to use, 2100W powered PA speaker with Bluetooth and a built-in 6-channel digital mixer for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The advanced user interface features a built-in touch panel and Bluetooth remote control, which allow you to set up and control the mix wirelessly using your favorite portable device.

The ART 915-AX employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 15" woofer and 700W to the 1.75" compression driver, which provide full-range audio (45 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 915-AX includes a power cord.

Bluetooth Stereo Audio Input    Built-In 6-Channel Digital Mixer    Advanced UI with Touch Panel & Remote    FiRPHASE Filters for Coherent Sound    Bass Motion Control Low-Freq Management    15" Woofer + 1.75" Compression Driver    45 Hz to 20 kHz Frequency Response    131 dB Max SPL Output    True Resistive Waveguide Technology    Configurations for Floor, Stage, Flown

• Built-in 6-channel digital mixer
• Advanced user interface with touch panel and remote control
• 1.75" compression driver and 15" woofer
• Up to 131 dB sound pressure level
• 2100W Class-D bi-amplification
• Dual combo preamp with 48V Power and mini-jack stereo line input
• Bluetooth stereo audio input, with dual speaker pairing option
• True Resistive Waveguide, FiRPHASE, and Bass Motion Control

Connect your instruments and microphones to the 48V powered preamps or the line inputs; an internal 6-channel digital mixer with Compressors, EQs, Reverb, and Ducker will help you get the job done. And if you run out of time, use the quick setup modes with step-by-step configuration options.

The Class 1 Bluetooth connection can receive 2-channel audio streaming and provides a stereo or dual mono output for pairing with AX-featured RCF speakers. RCF tested over 328' free-field operability. Enjoy the convenience of Bluetooth connection when you have architectural constraints, pedestrian areas, or inaccessible signal connections.

• Get the best microphone you have, because ART 9-AX provides you with the best preamp you can find in this segment.
• The microphone preamplifier circuit features the latest THAT Corporation technology to provide ultraclean and precise signal to the speaker.

• With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very low heat loss
• ART 9 is very energy efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
• All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high efficiency with minimum weight.

RCF LiveRemote App makes it easy to adjust ART 9-AX mixer, DSP, FX, routing, and Bluetooth settings. LiveRemote also allows full control of the internal ART 9-AX engine: recall and save presets, set your desired volume levels, adjust EQ, compressors, and FX, customize and tune your sound system and much more. Available for Android and iOS phones and tablets.

The internal mixer disentangles all your routing needs, and an internal crossover helps you use the speaker with any subwoofer. An internal 5-band parametric EQ lets you manage boomy spaces or modal resonances, while the output delay keeps your sound always in time. Wireless pairing to another ART 9-AX is a handy tool when you have physical constraints and can't run signal cables.

• The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
• The grille cover is heavy-duty steel, protecting both transducers and vented ports
• The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping, even at maximum volume settings
• It also performs as a reinforcement structure, for greater resistance to mechanical stress.

• When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
• ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
• The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
• When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.

• The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
• FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints
• The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
• This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.

• The True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers
• Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image
• Acoustically, the TRW waveguide mimics a resonance-free pure resistive load, reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.

• High frequencies: the 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs, making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer
• Low frequencies: low-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. The woofers are tested with a 200-hour continuous signal to stress the transducer at extreme levels.

Related Questions and Answers

Q: 1. Is there a way to turn the speaker lights off?

A: No, unfortunately there is no switch to turn off the LED lights on the Pyle Pro PPHP210AMX PA Speaker and 600W Amplifier/Mixer DJ Kit. The lights come on at a certain volume level and pulse with the beat of the music.

Q: 2. How good is the sound quality of this speaker - mainly for speeches, in a room about 25x50'?

A: The American Audio APX CS8 Powered Column PA System could be a great option for speaking applications like meetings and conferences, in addition to use for playing music. It should work very well in your 25 x 50' room. The APX CS8 has two channels with XLR and 1/4" inputs for microphones or line level devices, as well as a third channel with a 3.5mm aux input and the ability to switch to the onboard media player, which offers USB, SD, and Bluetooth playback. There is also a dedicated control knob for adjusting the low frequencies which allows you to tailor the sound for speech or music. The system delivers clear and full-sounding audio at a very reasonable price.

Q: 3. Can you dj with 4 of theses connect one to tws and then connect the rest with xlr output is this possible

A: Yes, in theory multiple units of the American Audio APX CS8 Powered Column PA System Mixer and Bluetooth could be chained together using its XLR output connection to feed the next speaker.

Q: 4. When playing mp3's from USB does the device have shuffle mode?

A: No, it does not have shuffle mode. The transport controls are play/pause and skip forward/backward.

Q: 5. If I'm connected to my laptop with bluetooth will I the thru output in the back be able to output that same audio simultaneously via cable to a recorder?

A: The XLR Thru output can be connected to a recorder for simultaneous recording..

Q: 6. What would happen if someone bangs into the narrow speakers while they are connected (or a child pulls it), will they crack, or will they simply pull out?

A: The three portions of the top speaker on the American Audio APX CS8 plug into each other in such a way that if the assembly were pulled, while plugged into the subwoofer, then the most damage would happen at the point where the subwoofer meets with the upper speaker.

Q: 7. I needed to know the characteristics of the internal amplifier?

A: The following information has been obtained from the published JBL PRX-835 Spec Sheet. Amplifier:Design: Highly efficient Class-D amplifierPower Rating : 1500W (750W x 2)AC Power Input: 100V - 240V 50/60 Hz

Q: 8. I see it says 300 w, and it might be hard to answer this question but i an unsure of how loud this speaker can get so if theres any references you can make to know how loud this speaker can get?

A: I seriously doubt the amp is rated at 300 watts continuous. It will work at a reasonable listening level in a room approximately 1000 to 1500 square feet which is what I use it for.

Q: 9. Hello Is this open box Yamaha Stagepass been inspected there at the shop or warehouse?

A: The Yamaha STAGEPAS 1K mkII 1100W 2-Way Portable PA System with Bluetooth is brand new; Boxed, sealed and shipped to B&H directly from Yamaha and it comes with a 3 year manufacturer warranty from Yamaha which you can find listed in the 'In The Box' section of the product page, located on your far right-hand side of the Overview Tab.

Q: 10. Do you have to charge the speaker or do need direct power

A: It takes direct power all time