Designed from the ground up to deliver stellar audio performance, the RCF NXL 44-A MK2 is a 2100W active 2-way column array speaker that's tuned for absolute clarity and deep, powerful bass well suited for bands, DJs, clubs, and rental houses. The NXL 44-A can be used alone, on a pole, or paired with a subwoofer, vertically coupled for improved vertical coverage, and can also be flown or truss-mounted using the included rigging points and special accessories.

The integrated bi-amplifier delivers 700W to the high-frequency compression driver and 1400W to the three 10" woofers, which combine for a 45 Hz to 20 kHz linear frequency response and a peak SPL of 135 dB. The rugged, tour-ready, high-quality Baltic birch plywood cabinet is easy to carry and installed securely using the dedicated rigging points.

For Portable and Installed Applications    Sleek Column Design & Flexible Rigging    2100W Class-D Amplifier    3" Titanium Neodymium Compression Driver    3 x 10" High-Power Neodymium Woofers    45 Hz to 20 kHz Frequency Response    Up to 135 dB Sound Pressure Level (SPL)    100 x 25° Constant Directivity Coverage    Bass Motion Control & FiRPHASE    8 x M8 Rigging Points and 8 x Quick Lock

• Up to 135 dB sound pressure level (SPL)
• 2100W Class-D amplifier
• 100 x 25° constant directivity coverage angle
• 3" titanium neodymium compression driver
• 3 x 10" high-power neodymium woofers
• 45 Hz to 20 kHz linear frequency response
• Bass Motion Control and FiRPHASE processing
• 8 x M8 Rigging Points and 8 x Quick Lock
• IP Rated Powercon TRUE1 TOP IN/OUT

• LINEAR: This preset is recommended for all regular applications of the speaker.
• 2 SPEAKERS: This preset creates the correct equalization for the use of two NXL 24-A or NXL 44-A coupled on a subwoofer or in suspended configuration.
• HIGH-PASS: This preset activates a 60 Hz high-pass filter for the correct coupling of the NXL 44-A with subwoofers not provided with their own internal filter.

The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and more powerful. With 2100W of power, the NXL MK2 2-channel Class-D amplifier is 50% more powerful than previous models. NXL manages extreme sound pressure levels with an ultrafast attack, realistic transient response, and very low power loss. NXL modules are energy-efficient so there's no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet—with no moving parts. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NXL amplifiers are designed according to EN62368-1 for maximum safety and house a Switch Mode Power Supply section with minimum weight.

The vertically asymmetrical horn design accurately projects the sound energy and avoids unwanted reflections when placed on a sub or a speaker stand, without tilting the enclosure. This design also allows configuring two cascading NXL columns for optimal coverage. Intelligibility is significantly increased in challenging acoustic environments. The speaker delivers an extended low-frequency range that is increased when paired with a subwoofer for medium-sized concerts and DJ sets.

Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. The extended clarity of the 3" compression driver features a neodymium magnet for improved current handling and reduced weight. The best-in-class titanium dome and the Polyimide/Kapton voice coil handle extreme power levels with very low distortion. Three, high-power 10" low-frequency woofers with a new advanced transducer design gain more stability over higher currents, with less distortion, fast transient response, and better heat dissipation.

• When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
• The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.

• RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener.
• The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

NXL series consists of full-range column line array speakers ideal for high-powered portable and installed professional applications where size is a critical factor. The sleek column design and flexible rigging options make it a smart choice for a wide range of sound applications. The rugged, high-quality Baltic birch plywood cabinet is easy to carry, with ergonomic handles on each side. It can be used alone, on a pole, or paired with a sub, vertically coupled for improved vertical coverage, and can also be flown or truss-mounted using the included rigging points and special accessories. From the cabinet to the final texture and the rugged protective grille, NXL Series offers maximum strength for intensive use on the road and can be used for fixed installation.

Related Questions and Answers

Q: 1. can I link 3 RCF BM2006 desk-top Paging Microphones and one RCF RC 2946 to select one or all 5 70V Speaker zones?

A: Yes you can connect up to 4 mic's and they can be sent to all or individual zones as you like. I am not familiar with the RCF RC 2946 nor do we carry it. You would have to contact RCF regarding this piece.

Q: 2. Will this work with a Toyo 4x5 camera?

A: Yes, this setup will work with a Toyo 4x5.

Q: 3. Can I mount a Panasonic AW-UE150 directly to this tripod?

A: Yes, But a pushing must be set in place in order to do so. Please review the following item Oben 3/8"-16 to 1/4"-20 Reducer Bushing BH #OB1039 • MFR #OB-1039 https://bhpho.to/36bOgGQ

Q: 4. I noticed verified buyer/reviewer "Kelley Shoots Food" has an image demonstrating a 90degree position on the center column. According to the specs this camera does not have a 90 degree feature. Does B&H offer and option to use this at 90 degrees?

A: You can get Manfrotto 131D Lateral Side Arm for Tripods BH #MA131DB

Q: 5. I do not understand the Bottom of C222 speaker, according to JBL SPECS it is a two way speaker with 2 15" woofers and Two horn sandwich in center, also it shows as being 60 " tall. Could you explain before I place an order for two speakers. Thank you

A: I apologize for any confusion. It's two 15" woofers, with top and bottom together. The bottom section is only 25" high. The top section is 34" high.

Q: 6. Can I use my Manfrotto 322RC2 grip action ball head on this tripod?

A: Absolutely. This tripod has a standard 3/8 threaded post which screws into the 3/8 female thread on the base of the 322RC2 head.

Q: 7. Does it fit on a speaker stand and have a 1 3/8" or 1 1/2" socket?

A: The Behringer PK108A Active 240W 8" Speaker System with Bluetooth and Media Player (BH # BEPK108AV2) will accept both size columns with the adapters that are typically included with speaker stands.

Q: 8. How many volts is the AC power input? 110 or 220V?

A: The RCF NX15-SMA available here at B&H is 115VAC compatible only.

Q: 9. Will the 028B Triman tripod support the Manfrotto MVH 502AH and MHXPRO-3W video heads?

A: Yes, the 028B Triman can easily support either head.

Q: 10. What would I need to take my 503 head off one of my other tripods and mount it on this one? Is that possible? If not, what's a good fluid head I could mount on this tripod?

A: There are a few different 503 heads. One is just called 503 and that attaches with just a 3/8 connection like the tripod you mentioned. You just unscrew the head from your other tripod and attach this to the 028B Studio Pro Triman Tripod Legs.Now if you have the 503 HDV, that uses a 75mm flat top and then that will not fit on the 028B.If you then do need a different head these are a few different ones.