The Transvideo CineMonitorHD10 SB RF-Ready Field Monitor is a 10" field monitor that can be powered using Anton Bauer-compatible batteries or other 11 to 36V DC sources. It is RF-ready, meaning it can be used with the Transvideo TitanHD Tx wireless transmitter.

The CineMonitorHD10 SB monitor ships precalibraded following the D65 ITU-R BT.709-5 and D56 specifications. It features a 4:3, XGA resolution panel that includes two zones. A 16:9, 1024 x 576 resolution picture zone above and a data zone below. The data zone can be used to display may types of useful data, including lens metadata, waveforms, histograms, SDI-embedded audio levels and more. It also features overlays including user-definable makers, focus peaking, timecode, mattes, and OSD tally.

The monitor supports standard definition PAL and NTSC signals as well as 720p, 1080i and 1080p. It features an HD-SDI/SD-SDI input with reclocked loop through, and HDMI input on a mini type C connector, a dedicated composite input with loop through, and an analog combo jack on an 8-pin Lemo connector for component, RGB, and composite. The screen adapts to non native aspect rations; the aspect ratios it supports are: 1.33:1, 1.78:1, 2.40:1 and 3.20:1. In addition, framelines can be used to "safe-in" secondary aspect ratio in cases were multiple deliver formats are anticipated.

1024 x 576 Resolution Picture Zone    SDI Input with Reclocked Loopthrough    HDMI Input on Mini Type C Connector    Component/RGB/Composite Combo Input    Supports PAL, NTSC, 720p, 1080i, & 1080p    Supports SD, HD, & Cinema Aspect Ratios    1000 Nits Bright AMLCD Panel    Tally, Serial, and GPI Data Ports    4-Pin XLR Power with Galvanic Isolation    Compatible w/ TitanHD Video Transmitter

Displays metadata from /i and LDS lenses as virtual scales the below the video image. Scales include: focus with depth of field and hyperfocal point, iris, zoom (if any). LensReader is compatible with: Cooke 5/i, S4/i, and mini S4/i; Arri/Zeiss MasterPrime and UltraPrime LDS; Arri/Fujinon Alura lightweight zooms; and Fujinon Cabrio series

When a Cine Tape is connected to the monitor, measured distance is displayed on the focus ring

Formerly VirtualHorizon, AvengerLeveler is a color coded electronic leveler with several renditions, adjustable sensitivity, and direction. The leveler cam either be driven by a built-in sensor or use an external sensor, such as the Betz-Tools external horizon

The monitor offer two waveform modes:

Sweep Mode: Shows a line representation of the picture in two sub-modes: In Line Mode, showing the Y, R, G or B component of the signal; in Parade Mode, showing RGB, GBR, YRGB, or YPrPb. Sweep Mode can display frame, twelve lines, or one specific line waveforms. In addition, the waveform can also be displayed as overlay above the video image

Frame Mode: Shows a frame representation of the Y component of the signal

Plots color vectors on a circular graph to provide objective data on the color composition of the image

Tints specific tonal values in the frame with a particular color to assist in gauging accurate exposure. Safety limits for clipping as well as maximum and minimum exposure values can be user defined

Includes preset markers for 4:3, 14:9, 16:9 as well as "TV safe". In addition, user-defined frame lines can created, composed of solid lines, dots, dashes, or corners with or without a crosshair and with or without matting. Matting includes four solid colors and four shades of semi-opaque gray

Choose between ten levels and nine colors. Peaking puts an colored overlay of increasing density over high-contrast parts of the frame to help identify what is in focus. Additionally, the image magnification scales the image at pixel to pixel to make critical focusing easier

Places an icon on the display indicating whether embedded audio is detected in the SDI signal alongside a digital VU meter showing one stereo pair out of the possible eight stereo channels SDI carries

Up to three tallies may be displayed simultaneously: two from an external source and one based triggered by the camera REC/STOP command embedded in the SDI signal. The tally can be a colored LED Displays and/or an on-screen tally. The OSD tally can take the form of frameline, "REC" style, or a big "ON AIR" exclamation

Displays SDI-embedded LTC, VUTC1, or VITC2 timecode

The image can be flipped horizontally or vertically as well as reversed, in case the monitor will be mounted upside down. Reversing can either automatically flip the image when the monitor is rotated or be locked in manually

Basic display adjustments include brightness, saturation, contrast, saturation, and hue. Advanced settings include gamma correction, with presets for linear, Rec. 709, Log C, and S-Log

Allows the monitor to be powered from a wide range of mobile power sources, including professional battery systems. The 4-pin XLR power input features galvanic isolation to help prevent ground loops in case of reverse polarity

Related Questions and Answers

Q: 1. How long would it take to fully charge a Titon 90 Lithium-Ion Battery?

A: this will take approximately 3-4 hours to charge

Q: 2. What bit rates can it record? Will it go down to one megabit per second?

A: We have not heard such a request before. Please write to us with what you wish to do. provideo@bhphoto.com.

Q: 3. Can I use the Tandem charger with this battery?

A: No unfortunately it is not compatible.

Q: 4. Does this powertap offer different regulated voltages. Ex. 5v, 7.2v, 9, and 12?

A: This is 12V P tap only adapter. No other voltage outputs

Q: 5. Does this sandwich adapter be able to mount to the Anton Bauer Matrix Cheese plate directly? The three prongs from the sandwich adapter doesn't seem to attach to the Matrix plate, please correct me if I am wrong. Thanks!

A: The sandwich plate is intended to be mounted on an existing Anton Bauer battery plate to give you more P-Tap outputs. It doesn't attach to the Matrix plate directly. I have seen some people get around this however by disassembling it and attaching it with other screws.

Q: 6. Will this charge an Anton Bauer Digital 90 battery all the way to 100% or will it stop at 97%?

A: no this can NOT be used to charge the anton bauer digital 90

Q: 7. Does this work with Core micro batteries?

A: Yes, the Anton/Bauer P-Tap Charger can charge the Core SWX NANO Micro 98Wh Lithium-Ion Battery (V-Mount).

Q: 8. Can this be used with the Canon R5C?

A: Yes, You could use the Anton Bauer Go 90 with the Canon R5C using the following cables. Anton Bauer barrel 9v https://bhpho.to/3U09Ocp Adapter Canon dummy BH #CADRE6C https://bhpho.to/3tPKT0z

Q: 9. What is the display resolution? (missing from specs)

A: According to Transvideo, the resolution is 1280 x 720.

Q: 10. How do I power this device? Does it have batteries? Can it be powered from D tap source on my Steadicam sled?

A: This device comes with a different kind of power supply. However Transvideo does offer some different power solutions, which we do not have listed on our website. Please email us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a with this question and we can further assist you in finding a solution.