Square Card Reader Contact

West Penn Plenum-rated Ac251822b Access Control Cable (yellow, 1000')

Product Code: ga117450
Availability: In Stock

$3,089.85 $4,572.98

Qty

6 reviews Write a review

Description
Reviews (6)

The yellow Plenum-Rated AC251822B Access Control Cable from West Penn has a length of 1000' and may be used for access control. It also does not have connectors on either end.

16 Total Conductors Plenum Rated 1000' Length

Conductor Parameters
Number of Conductors	Card Reader - 6 Door Contact - 2 Request to Exit - 4 Lock Power - 4
AWG Size	Card Reader - 22 Door Contact - 22 Request to Exit - 22 Lock Power - 18
Conductor Stranding	Card Reader - 7x30 Door Contact - 7x30 Request to Exit - 7x30 Lock Power - 7x26
Conductor Type	Bare Copper
Nominal DCR	Card Reader - 17 Ohms per 1000'/304.8 m Door Contact - 17 Ohms per 1000'/304.8 m Request to Exit - 17 Ohms per 1000'/304.8 m Lock Power - 6.2 Ohms per 1000'/304.8 m
Insulation Parameters
Insulation Type	Plenum PVC
Insulation Thickness	0.007" / 0.178 mm
Insulation Color Code	Card Reader - 1. Black, 2. Red, 3. White, 4. Green, 5. Brown, 6.Blue Door Contact - 1. Black, 2. Red Request to Exit - 1. Black, 2. Red, 3. White, 4. Green Lock Power - 1. Black, 2. Red, 3. White, 4. Green
Shielding Parameters
Shield Type	Card Reader - Overall 100% Aluminum Foil Door Contact - None Request to Exit - None Lock Power - None
Drain Wire Type	Card Reader - Tinned Copper Door Contact - None Request to Exit - None Lock Power - None
Drain Wire AWG	Card Reader - 24 AWG Door Contact - None Request to Exit - None Lock Power - None
Electrical Characteristics
Nom. Cap. Between Conductors	55 pF/ft
Nom. Cap. Conductor to Shield	99 pF/ft
Inner Jacket Color
Color	Card Reader - Orange Door Contact - White Request to Exit - Blue Lock Power - Gray
Construction Parameters
Total Number of Conductors	16
Jacket Type	Flexible Plenum
Nominal Cable O.D.	0.425" / 1.080 cm
Plenum	Yes
NEC UL Rating	CMP
RoHS Compliant	Yes
Bend Radius	3.825" / 9.716 cm
Length	1000' / 304.8 m
Cable Weight	97 lb / 44 kg
Electrical/Optical Characteristics
UL Flammability	NFPA 262 Plenum
Operating Temperature	32 to 167°F / 0 to 75°C
UL Voltage Rating	300 V

Related Questions and Answers

Q: 1. Sony's site says this is compatible with the FX9. Do you know if it is compatible with the FX6 or FX3?

A: The RCP1000/1500 has an Ethernet interface. If used with the XDC-FX9, the FX9 is compatible. The other two models (FX6/FX3) are not.

Q: 2. Can the display be turned off (i.e. no light) while the unit is on and heating?

A: I contacted the manufacturer concerning your inquiry. CineStill states that there is no a function that allows the TCS to run without the display being visible.

Q: 3. Will this work on 240v?

A: No, this °Cs Temperature Control System would not work on 240 Volts

Q: 4. Does this cool as well as heat to the set temp (doesn’t rely on ambient temp for cooling) ??

A: This is only a heater and a circulator.

Q: 5. If you are hooking up zoom and focus would you need two cords?

A: The Blackmagic Design Zoom Demand and Blackmagic Design Focus Demand would daisy chain to connect to the camera, so two of the Blackmagic Design USB-C Cable for Focus or Zoom Control (40") would be necessary to connect.

Q: 6. Will this work with a PXW-X320?

A: Yes, this will work with the PXW-X320.

Q: 7. Does this extension compatible with Libec ZFC-L Remote to Sony Camcorder?

A: Yes, this extension will work with the Libec ZFC-L Remote.

Q: 8. Do you think this would trigger start stop on a Lumix gh4 with a DJI RSC ?

A: The SmallRig USB-C to Panasonic LANC Control Cable for Top Handle (B&H# SM2970B) could be used with a Panasonic Lumix GH4 Mirrorless Camera (B&H# PADMCGH4B) and either the SmallRig NATO Top Handle with Record Start/Stop Remote Trigger for Select Sony Cameras (B&H# SMHTN2670, https://bhpho.to/43JEdSq) or the SmallRig NATO Top Handle with Start/Stop Button for Select Panasonic Cameras (B&H# SM2880, https://bhpho.to/3mBE7va). SmallRig Control Handle HTN2670 SmallRig Control Handle 2880

Q: 9. What screw size are these screws?

A: The Blackmagic Design USB Type-C Cable for Focus or Zoom Control uses an M2 screw.

Q: 10. Is this the right cable for Canon R series cameras?

A: No, the Godox Monitor Camera Control Cable for GM6S (Multi Connector) is not the correct cable for Canon R series cameras. The correct cable would be the Godox Monitor Camera Control Cable for GM6S (USB Type-C Connector), B&H # GOGMCU6.

Mark	26/08/2024
It takes the headache of getting your temp correct. Set it and let it run for a while and your chemicals will be at the correct temp. Also the timer is quite handy. 5

Daniel	26/07/2024
I purchased this heater so that it would be easier to bring my C-41 chemistry to 102 degrees F and maintain it at that temperature during processing. It does not disappoint. I developed 2 rolls of 10 year old Fujicolor 200 and 2 rolls of Kodak Ektar i shot in 2016 and this device really did a good job of heating and maintaining proper temperatures throughout the process. I was amazed at how fast it reached the proper temperature, and it made quick work of mixing my chemicals as well. This is an excellent product. 5

Jess	23/07/2024
Yes you read it correct. This has made my C41 Color Film developing process sooo much easier. I can now have consistent temps without even thinking about it! Pulse when you are done, just turn the temp up to 135 Deg. Throw some season steaks in a vaccu-sealer and put them in the bath for a couple hours and you have perfectly sous vide medium rare steak! 5

Ted	09/07/2024
The Cinestill Cs Temperture Control unit works great. Not only does it maintain a set temperature but it also works as a timer. If time and temperature are critical in your workflow then this compact system might be for you. Just clip it into a tub of water, with your chemistry, set the desired temp in Celsius or Fahrenheit and it will heat and maintain the set point. Couldn't be easier. 5

Lael	23/06/2024
The CineStill Film °Cs Temperature Control System TCS-1000 has made keeping color chemistry at exact temperature super easy. In the past I was setting chemistry in water baths and constantly adding warm or cool water while I worked to make sure temp was correct. Now I set the temp on the controller and let it do the regulating. Works for black and white chemistry also. 5