The extra-large, chroma key green Bubblebee Industries The Spacer Bubble System is a multipiece, adaptable windshield system for shotgun microphones that allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 18 to 24mm in diameter and has an inner depth of 180mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 18 to 24mm in Diameter    180mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

• Rode: NTG-3
• Sennheiser: ME-66, MKH-416
• Sanken: CS-3, CSR-2

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet, simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• Practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

• The combination of foam and mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

Related Questions and Answers

Q: 1. Is the Sennheiser MKE 440 Stereo Shotgun compatible with, or adaptable to, the Zoom H6 recorder? instead of the capsule mic it comes with?

A: Yes. This will work with the 3.5mm microphone input. Just keep in mind it will disable the built in mics.

Q: 2. How much more does the Space Bubble reduce wind noise than the Windkiller? 5db? 10db?

A: Bubblebee Industries has not provided a spec for the exact amount of attenuation provided by The Spacer Bubble, likely because this number would be contingent on multiple factors such as wind speed, direction, microphone sensitivity, and so on.

Q: 3. Will this properly fit on a camcorder Panasonic CX350 with a MKH 416?

A: Yes, the extra-large Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics is compatible for use with the Sennheiser MKH 416 Shotgun Microphone when mounted on the Panasonic AG-CX350 4K Camcorder.

Q: 4. Will this work for the Rode NTG-3?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Large, Black) is compatible with the Rode NTG3 Shotgun Microphone.

Q: 5. Is this compatible with Sennheiser MKH-50?

A: Yes, the Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Extra-Small) will fit over the Bubblebee Industries The Spacer Bubble Windshield (Extra-Small/Big Mount), which is the compatible size for the Sennheiser MKH 50 Microphone. The Short-Haired Spacer Cover is not intended to be used by itself. It is intended for use over the Spacer Bubble Windshield. You can purchase both items together, which is the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Chroma Key Green, Extra-Small/Big Mount) - B&H # BUBBISBGRXSB.

Q: 6. If I attach the LG size Spacer Bubble Windshield and Fur Cover to the AT BP4029 (AT835ST), how much mic shaft will be left?

A: The AT BP4029 is 9.29" long, and the Spacer Bubble Windshield & Fur Cover System has an inner depth of 5.1", so the remaining shaft would be 4.19".

Q: 7. does this come as a pair?

A: nope.. individual units.. just bought a pair

Q: 8. Mkh50?

A: No, the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Black, Extra-Small) is not compatible for use with the Sennheiser MKH 50 Microphone. All of the Spacer Bubble models are designed to fit microphones that have a diameter of 18 to 24mm, but the MKH 50 has a 25mm diameter. As a better option, you can use the Rycote Super-Softie Windshield for Shotgun Mics - 5cm, 24/25 (B&H # RYWSQAT), which is designed to fit mics that have a diameter of 24 to 25mm and it is compatible for use with the MKH 50.

Q: 9. How long is the outer length of the Large size Spacer Bubble Windshield with Fur Cover?

A: The total length of the Bubblebee Industries BBI-SB is about 6.5 inches.

Q: 10. Which Bubblebee Long Hair Windkiller for the Azden SGM-250CX Short Shotgun Microphone? Small or Extra Small?

A: The Azden SGM-250CX Short Shotgun Microphone requires the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Small, Black). The capsule section of the microphone is 4" long, and the windshield is 4.1" long.