The extra-small, chroma key green Bubblebee Industries The Spacer Bubble System is a multipiece, adaptable windshield system for small-diaphragm microphones that allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 18 to 24mm in diameter and has an inner depth of 55mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 18 to 24mm in Diameter    55mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

• Sennheiser: ME 64, MKH 8050, K6
• Shoeps: CMC Series
• DPA: 4006, 4011
• Audio-Technica: AT-4053
• Rode: NT55
• Sony: ECM-MS2
• Audix: SCX1C

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet, simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• Practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

• The combination of the foam and mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

Related Questions and Answers

Q: 1. does this come as a pair?

A: nope.. individual units.. just bought a pair

Q: 2. Will this fit the Sennheiser Mke2?

A: Yes, the MKE2 is a subminiature lavalier, the windscreen will fit .

Q: 3. How much more does the Space Bubble reduce wind noise than the Windkiller? 5db? 10db?

A: Bubblebee Industries has not provided a spec for the exact amount of attenuation provided by The Spacer Bubble, likely because this number would be contingent on multiple factors such as wind speed, direction, microphone sensitivity, and so on.

Q: 4. How long is the outer length of the Large size Spacer Bubble Windshield with Fur Cover?

A: The total length of the Bubblebee Industries BBI-SB is about 6.5 inches.

Q: 5. If I attach the LG size Spacer Bubble Windshield and Fur Cover to the AT BP4029 (AT835ST), how much mic shaft will be left?

A: The AT BP4029 is 9.29" long, and the Spacer Bubble Windshield & Fur Cover System has an inner depth of 5.1", so the remaining shaft would be 4.19".

Q: 6. Will this work with the Deity S-Mic 2S? (BH #DESMIC2S)

A: The medium-size Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Medium, Black) is too long for the Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone. The mic is 5.83" long and the inside depth of the windshield is 5". Instead, use the small-size Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (B&H #BUBBIWKS), which has an inside depth of 4".

Q: 7. Whats the difference between long hair and the short one?

A: The simple answer is that a windshield with longer hair can provide better protection for the microphone against wind noise in very strong wind because the longer hair and varying lengths can help to slow down the wind's speed before it reaches the mic. A windshield with shorter hair generally works very well to protect the microphone against wind noise in low- to mid-level wind. Additionally, the shorter hair allows a microphone to retain more of its original frequency response.

Q: 8. Is the tip of the 5/8" stud threaded 1/4"?

A: The mounting stud has a 1/4 20 on the end of it.

Q: 9. Can you purchase extensions for this blimp?

A: A boompole such as : https://www.bhphotovideo.com/c/product/326895-REG/K_Tek_KE_110CC_KE_110CC_Avalon_Series_Aluminum.html Additionally: https://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/accessories

Q: 10. Will this properly fit on a camcorder Panasonic CX350 with a MKH 416?

A: Yes, the extra-large Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics is compatible for use with the Sennheiser MKH 416 Shotgun Microphone when mounted on the Panasonic AG-CX350 4K Camcorder.