The extra-small, red Bubblebee Industries The Spacer Bubble System is a multipiece, adaptable windshield system for small-diaphragm microphones that allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 18 to 24mm in diameter and has an inner depth of 55mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 18 to 24mm in Diameter    55mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

• Sennheiser: ME 64, MKH 8050, K6
• Shoeps: CMC Series
• DPA: 4006, 4011
• Audio-Technica: AT-4053
• Rode: NT55
• Sony: ECM-MS2
• Audix: SCX1C

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet, simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• Practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

• The combination of the foam and mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

Related Questions and Answers

Q: 1. does this come as a pair?

A: nope.. individual units.. just bought a pair

Q: 2. Is the tip of the 5/8" stud threaded 1/4"?

A: The mounting stud has a 1/4 20 on the end of it.

Q: 3. Does it work for sennheiser mke600? If not, which one do you have that does fit it?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics will fit mics with a diameter of 18 to 24mm, and the Sennheiser MKE 600 has a diameter of 20mm.

Q: 4. Would the Audio-Technica bp4025 head fit when mounted with the 5 pin XLR cable?

A: The Rycote Super-Shield Kit for Shotgun Mics would not be recommended for use with microphones as wide as the Audio-Technica BP4025.

Q: 5. If I attach the LG size Spacer Bubble Windshield and Fur Cover to the AT BP4029 (AT835ST), how much mic shaft will be left?

A: The AT BP4029 is 9.29" long, and the Spacer Bubble Windshield & Fur Cover System has an inner depth of 5.1", so the remaining shaft would be 4.19".

Q: 6. Can you purchase extensions for this blimp?

A: A boompole such as : https://www.bhphotovideo.com/c/product/326895-REG/K_Tek_KE_110CC_KE_110CC_Avalon_Series_Aluminum.html Additionally: https://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/accessories

Q: 7. this is good for MKE 600I still have ME67ME66What else do I need to purchase?It can be applied

A: To clarify: Modular 5 will accommodate only the MKE 600 and ME 66; Modular 7 will accommodate all three, but is larger than required for the MKE 600 in particular.

Q: 8. Will this work with the Deity S-Mic 2S? (BH #DESMIC2S)

A: The medium-size Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Medium, Black) is too long for the Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone. The mic is 5.83" long and the inside depth of the windshield is 5". Instead, use the small-size Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (B&H #BUBBIWKS), which has an inside depth of 4".

Q: 9. Whats the difference between long hair and the short one?

A: The simple answer is that a windshield with longer hair can provide better protection for the microphone against wind noise in very strong wind because the longer hair and varying lengths can help to slow down the wind's speed before it reaches the mic. A windshield with shorter hair generally works very well to protect the microphone against wind noise in low- to mid-level wind. Additionally, the shorter hair allows a microphone to retain more of its original frequency response.

Q: 10. Will my sennheiser 416 fit ?

A: The correct model of Super-Shield for the MKH416 is the Medium (MFR # 010321): a href= http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html target= _blank http://www.bhphotovideo.com/c/product/1044548-REG/rycote_010321_super_shield_kit_medium.html/a