The blue, extra-small Bubblebee Industries The Short-Haired Spacer Cover is a fur cover designed to slip over The Spacer Bubble windshield size extra-small and size extra-small/Big Mount, and fit perfectly. Made of high-quality, high-density short-haired faux-fur, it allows for optimal frequency transparency and effective wind protection when recording outdoors in light-to-medium winds.

Constructed with a sturdy leather brim, the Spacer Cover stays firmly in place when it is mounted. The inside is made of a durable polyester mix, allowing the cover to quickly and easily slide onto the Spacer Bubble base, so you can adapt to on-location changing-wind conditions in just seconds. This polyester mix is tested to ensure the most linear frequencies. When wet, place the Spacer Cover in your Spacer Bubble mesh storage bag where the fur can dry quickly and naturally.

Minimizes Light-to-Medium Wind Noise    Fits The Spacer Bubble Extra-Small    Fits Spacer Bubble Extra-Small/Big Mount    Short-Haired/High-Density Slip-On Fur    Acoustically Transparent Design    Quick-Drying Fur

• Slides onto The Spacer Bubble when recording outdoors in light-to-medium winds
• Easily adapt to your changing surroundings when you are in the field
• Fits in your Spacer Bubble mesh storage bag so you can keep everything close by
• Slip-on fur made from Bubblebee Industries' best imitation fur (high-density of hair)
• Quick-drying fur
• Designed in Denmark by sound lovers, for sound lovers

Related Questions and Answers

Q: 1. Is the tip of the 5/8" stud threaded 1/4"?

A: The mounting stud has a 1/4 20 on the end of it.

Q: 2. what is item weight?? page says item=1.25lb and package=0.38lb, but this can't be right. swapped values seems improbable too.

A: The Benro GDHAD1 Tripod Spacer is 1.25 pounds as mentioned on Benro's website. Please take a look at the following link: https://bit.ly/3OcpMA2

Q: 3. I need a part like this but with two male screws. Is there a part like this?

A: Unfortunately, a version of the Wooden Camera Rosette Spacer Standoff (Large) with male-to-male screws is not listed.

Q: 4. The box is 2.7" high and the product spec has the Trippod Spacer at 3.7" high. How high is the spacer?

A: The Benro GDHAD1 Tripod Spacer is 1.77 inches tall.

Q: 5. How much more does the Space Bubble reduce wind noise than the Windkiller? 5db? 10db?

A: Bubblebee Industries has not provided a spec for the exact amount of attenuation provided by The Spacer Bubble, likely because this number would be contingent on multiple factors such as wind speed, direction, microphone sensitivity, and so on.

Q: 6. Which Bubblebee Long Hair Windkiller for the Azden SGM-250CX Short Shotgun Microphone? Small or Extra Small?

A: The Azden SGM-250CX Short Shotgun Microphone requires the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Small, Black). The capsule section of the microphone is 4" long, and the windshield is 4.1" long.

Q: 7. How long is the outer length of the Large size Spacer Bubble Windshield with Fur Cover?

A: The total length of the Bubblebee Industries BBI-SB is about 6.5 inches.

Q: 8. Will this SWS-30 windshield also fit the Azden SMX-30V model?

A: Yes, the Azden SWS-30 Furry Windshield Cover will fit the Azden SMX-30V Stereo/Mono Mixable Video Microphone.

Q: 9. Will this work with the Deity S-Mic 2S? (BH #DESMIC2S)

A: The medium-size Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Medium, Black) is too long for the Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone. The mic is 5.83" long and the inside depth of the windshield is 5". Instead, use the small-size Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (B&H #BUBBIWKS), which has an inside depth of 4".

Q: 10. Does it work for sennheiser mke600? If not, which one do you have that does fit it?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics will fit mics with a diameter of 18 to 24mm, and the Sennheiser MKE 600 has a diameter of 20mm.