The black Shure MX410RLPDF/N 10" Dualflex Modular Gooseneck Microphone is a gooseneck microphone with a sleek, low-profile suitable for use on conference tables, podiums, altars, and lecterns where aesthetics are important. It features an interchangeable microphone capsule design and is offered without a capsule included, so you can choose the one that best fits your application.

The 10" gooseneck features flexible Dualflex sections at the top and bottom to facilitate precise positioning. The red light ring on top indicates the mic's On/Mute status when it is connected to an automatic mixer.

The MX410RLPDF/N comes without a preamp, since it is primarily designed to be mounted on either an MXW8 or ULXD8 wireless tabletop base. Other mounting options are available with the addition of a preamplifier module. The mic features CommShield technology for shielding against RF interference from portable wireless devices.

For Conferences and Meetings    Gooseneck Mic for Wireless Desktop Base    Red LED Ring Light on Top    15" Dualflex Neck, No Capsule    RF Filtering with CommShield technology    Low-Profile, Aesthetic Design

• Gooseneck length: 10"
• No cartridge
• No preamp
• Dualflex sections at the top and bottom
• Status indicator: Red light ring on gooseneck top
• RF filtering with CommShield technology
• Cartridge options (available separately): Cardioid, supercardioid

• MXW8 Wireless Desktop Base
• ULXD8 Wireless Desktop Base
• MX400DP Desktop Base
• MX890 Wireless Desktop Base
• MX400SMP Surface-Mount Preamp

Related Questions and Answers

Q: 1. Is the base threaded?

A: No

Q: 2. Can be used with Microphone Deity S-mic 2s?

A: The Rycote 086003 Windshield Kit 2 Complete Windshield and Suspension System is compatible for use with the Deity Microphones S-Mic 2S Short Shotgun Microphone. The windshield kit accommodates small microphones that measure 4.8 to 6.3" (121 to 160mm) in length with a diameter of 0.75 to 0.98" (19 to 25mm). The S-Mic 2S is 5.8" (148mm) long and has a diameter of 0.75" (19mm).

Q: 3. What is the diameter of bottom part of shock mount? In other words, what size hole should I drill?

A: Per the instructions booklet for the shock mount, 1. Drill a 44mm (1-3/4 in.) hole in desired mounting surface. 2. Mark and drill starter holes for screws, using shock mount as a template. We have the shock mount installed in a podium now, so I can't physically verify this dimension, but my memory is the instructions have this correct.

Q: 4. Can anyone tell me the thread size on the bottom of this unit (for boom pole, etc)? I need to adapt it to an old-school mic stand. Thanks!

A: Hi Jeff: thanks for your question. It's 3/8 . If your old-school stand is 5/8 , you can use the following adapter: a href= http://mymic.rycote.com/products/brass-3_8-m-to-5_8-f-screw-adaptor/. target= _blank http://mymic.rycote.com/products/brass-3_8-m-to-5_8-f-screw-adaptor/./a Basically, any 3/8 M to required size adapter will work. I hope that helps!

Q: 5. what is the Windscreen Length?

A: The Rycote Windshield # 4 is 330mm (13 ) in length, 440mm (17.3 ) with the end caps. Designed to accommodate mics up to 280m. (11 )

Q: 6. Is the base threaded?

A: It is and will attach to any standard mic stand.

Q: 7. Will the 4017b fit in here?

A: The Rycote Windshield Kit 2 would not be recommended for the DPA 4017b, as it will be slightly too short. The Rycote Super-Shield Kit for Shotgun Mics (Medium) (BH #RYSSKM) would be recommended instead.

Q: 8. I use this with my CMC641, but would like to get a miniCMIT. Any one know if it will work with that?

A: Hi Veronica. Yes, it will definitely work.

Q: 9. will this fit the sennheiser MKH 416 mic?

A: The latest revision features a short XLR connector and therefore is now compatible with the MKH416.

Q: 10. Can this accomodate a Sanken CS-M1?

A: No. The Rycote WS 9 Modular Windshield Kit is not compatible for use with the Sanken CS-M1 Ultracompact Shotgun Microphone. The WS 9 Windshield is intended for use with microphones that are up to 3.9" long and the CS-M1 is just over that at 4.06" long. As a compatible option, you can use the Rycote Modular Windshield WS 1 Kit MZL (B&H # RYMWS1MZLKIT) which is intended for use with microphones that are 2.8 to 4.7" (71 to 120mm) long.