The WyreStorm Digital & Analog Audio Extractor with HDMI Pass-Through is a powerful plug-and-play 4K audio de-embedding solution with full 18 Gb/s HDMI and HDCP 2.2 support. It allows digital or analog audio to be de-embedded from the source and sent to an audio distribution system, such as an AVR or amplifier, all while passing video up to 4k60 4:4:4 to a display, projection screen, or video matrix.

It is perfect for when the source de-embed isn't available, and it has three audio EDID settings that aid in video distribution, bypassing the need for the source to be connected directly to the AVR/AMP over HDMI.

Supports HDMI 2.0    Supports Digital 5.1 & 2-Channel Analog

It is perfect for de-embedding digital 5.1 surround or 2-channel analog from anywhere inline or from sources not equipped with a native audio breakout—such as Apple TV 4K—while passing video content to a matrix switch or display.

When multiple audio formats are needed in a system, it gives the user three audio EDID options: 5.1 surround, 2-channel analog, or pass-through. This is perfect if multiple audio amplifiers or AVRs are in the system, allowing each audio system to receive a discrete EDID without affecting the source.

Sporting an 18 Gb/s HDMI input, the extractor supports all UHD video signals up to and including 2160p 4:4:4 and high frame rate HDR 12-bit 4:2:2 up to 60 Hz.

All WyreStorm UHD 4K extenders are compliant with strict anti-piracy algorithms that prevent unauthorized content distribution.

Related Questions and Answers

Q: 1. Does the CEC bypass allow the TV remote's volume control to change the volume of the R/L 3.5mm headphone output?

A: Unfortunately, the Ocean Matrix 4K HDMI to HDMI Audio Extractor/De-Embedder with Dolby ATMOS CEC will not allow the TV's remote to control volume of the 3.5mm output. That will need to be adjusted by using the equipment that the output is connected to.

Q: 2. Will output the extracted audio to both the optical and L/R out at the same time? I want to pass the audio to headphones and a hearing aid broadcaster at the same time.

A: Yes. Audio format must be set for 2ch top accommodate both audio at sometime.

Q: 3. I see that the HDMI still puts audio at the Sametime as the secondary audio outputs. My question is, Does the HDMI still output in 5.1 Dolby while simultaneously putting signal to analog Left and Right? My need is to have 5.1 through hdmi while sending rca L and R to my analog zone 2.

A: Yes, the specifications for HDMI protocol include LPCM 2.0, 5.1, 7.1, Dolby 5.1, DTS 5.1, DD+ Dolby TrueHD, and DTS-HD Master Audio.

Q: 4. I have a dumb HDMI monitor, not a TV. Will this device extract the audio without audio feedback from the monitor?

A: The DVDO HDMI 2.0 Audio Extractor is capable of extracting 2 channel or 5.1 channel audio from an HDMI output device while still passing the audio with video over HDMI. To avoid feedback to external audio monitors, turn down to 0 on any audio from the source and destination display.

Q: 5. Does the unit come with a power cable or power supply?

A: Yes, the DVDO HDMI 2.0 Audio Extractor comes with a power supply included.

Q: 6. Will this device successfully output sound via optical out to my DACmagic plus from Cambridge Audio? I am planning on connecting this device with either the new apple tv 4k or roku ultra. I will use my Rega Brio analog only integrated amplifier for 2 channel audio. Many thanks for your guidance.

A: Hi Jacques. While we haven't tested the OMX-05HMHM0001 with the DACMagic unit specifically, we don't foresee any issues. You should be able to connect the TOSLINK output of the OMX-05HMHM0001 right to the input of our DACMagic Plus unit and the extracted audio signal should pass without issue as long as the DACMagic supports the audio format being output. Thank you!

Q: 7. Does this device extract audio from Apple Tv to output to amplifier via Rca Output?

A: Yes, the DVDO HDMI 2.0 Audio Extractor does support HDCP 2.2 and that is one of the requirements for the Apple TV. It should work.

Q: 8. Does the DVDO HDMI 2.0 Audio Extractor output Stereo Audio or 2 channels of Mono audio?

A: The DVDO HDMI 2.0 Audio Extractor will take the input and output it the way it came in, i.e., if it comes in as stereo, it will output it the same way.

Q: 9. Will this work with a Roku Ultra player?

A: Yes, The DVDO HDMI 2.0 Audio Extractor should work with the Roku Ultra and allow you to extract the audio so you can use it with TOSLINK SPDIF Digital or Analog speakers.

Q: 10. Will this device extract audio from 4K Apple TV and output to rca into my existing amplifier?

A: Yes, the DVDO HDMI 2.0 Audio Extractor should work for extracting audio from your T.V. to RCA so long as your T.V. has an HDMI output that would mirror the video feed. You may want to first extract the audio before sending the video signal to your T.V. instead of extracting after it's been sent through the T.V.