This jar contains 100 of Jonard Tools RJ11 Pass-Through Connectors, which are used by network installers/technicians to terminate telephone cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating flat or round telephone cable, or even replacing an existing connector (Cat 3 or other similar).

50 μin Gold Plating    Standard Two-Point Prongs

• 50 μin gold plating on contact surfaces provides greater signal quality than the competition
• Standard two-point prongs allow you to use stranded or solid Cat 3 cables
• Simplify twisted pair network cable termination by allowing wires to pass through the connector
• Pass-through feature removes the need to measure and cut wires before termination, leading to better connections and reducing signal loss
• Clear housing allows the operator to see the wire pairs easily
• Comes packaged in a jar for convenient storage

Related Questions and Answers

Q: 1. Can this also be used for line level signal? ex: to a powered speaker

A: Yes, the Shure A15HP In-Line High Pass Filter can be used for line level signal. Even though its main use is for microphones, the A15HP can also be used for other audio applications to reduce low frequencies below 100 Hz.

Q: 2. Does this unit include the power supply?

A: Yes, the power adapter for the Cisco ATA191-3PW-K9 is included in the box.

Q: 3. If a V-Mount battery is installed, does the battery then pass power through to these ports, or is a D-tap cable necessary?

A: Yes, power is passed through to the two 2-pin LEMO-type outputs and two D-Tap outputs. The two 2-pin ports also support power input, so you can utilize external power to your rig.

Q: 4. Could you charge a battery through these ports by using a D-tap charger cable?

A: No, the Tilta Power Pass-Through Plate with V-Mount Battery Plate cannot power the V-Mount battery attached through the D-Tap on the unit. The battery can however be charged with its own D-Tap port.

Q: 5. Does the connectors come with magnets,such that both the connectors can be joined together when taken out from the camera beads?

A: No, the PGYTECH Quick Connectors with Quick Beads do not have any magnets installed in them.

Q: 6. Does this item contain samples of bacteria, too?

A: Only 1 slide with 3 types of bacteria (unidentified). Overall, it's a good material.

Q: 7. Two questions here. I work in a studio setting with 500 W daylight bulbs. Will this stand the high heat generated by the bulbs? Also, with the light be distributed enough to light an entire person, standing, or objects the size of a car if I use two units?

A: Hi Rebecca. I use profoto D1 and B1 strobes versus continuous light. So, I'm not sure the heat rating of this umbrella. If you're shooting with fluorescent or LED lights, I would guess you'll be ok. If you're using anything that generates a lot of heat, I'd check with the manufacturer for what it can handle regarding heat. As far as coverage, I use this all the time for large groups as my fill light and it works great. You get a lot of diffusion for the price.

Q: 8. Are these the 3/4 wide webbing?

A: The webbing used on the Adjustable is indeed 3/4 wide. The actual connector to the camera is 3/8.

Q: 9. Does this XLR barrel adapter block Phantom power (48v)? I tried a different brand and it only worked on mics that did not need phantom power.

A: No, the Shure A15HP does not block phantom power and it does allow phantom power to pass through so it can be used with condenser microphones as well as dynamic microphones.

Q: 10. is this compatible with Google Voice?

A: Yes, this can work with Google Voice.