The Shure UA8 1/2 Wave Dipole Antenna (694 to 758 MHz) is compatible with Axient, UHF-R, ULX-D, ULX, SLX, and BLX4R receivers as well as PSM1000 and PSM900 transmitters. It offers 45° positioning related to the horizontal or vertical position, giving you more flexibility to achieve optimal RF reception.

For Axient, UHF-R, ULX-D Receivers    For ULX, SLX, and BLX4R Receivers    For PSM1000 and PSM900 Transmitters    45° Positioning    BNC Connector

Related Questions and Answers

Q: 1. Can I use this for the Lectrosonics reciever system? It has a bnc antenna option as well...

A: The Shure UA8-470-636 Wideband 1/2 Wave Receiver Antenna (A: 470 to 636 MHz) might work with a Lectrosonics receiver that operates within the same frequency range.

Q: 2. I have an Sennheiser EW100 G3 Receiver with a frequency range of 516-558MHz. Will this antenna still work?

A: Yes, the Sennheiser HALF WAVE DIPOLE Half-Wave Antenna Rods for EW-D EM Receiver are compatible for use with the Sennheiser EM 100 G3 Wireless Receiver that operates on the 516 to 558 MHz frequency band.

Q: 3. Does this antenna need line of sight? Would it work around minor obstructions like a mixing desk?

A: The UA8-470-636 Wideband 1/2 Wave Receiver Antenna (A: 470 to 636 MHz) will work around minor obstructions but it is best to keep it as close to line of sight as you can.

Q: 4. what is the gain of the antenna?

A: Regarding the Sennheiser HALF WAVE DIPOLE Half-Wave Antenna Rods for EW-D EM Receiver (Pair, Q: 470 to 550 MHz) and what is the gain of the antenna, it is 2.15 dBi.

Q: 5. I'd like to boost the range of my Lectro dualSRC (a1)Rx and (block 23) IFB Tx. Do you suggest multiple sna's ( one for each unit ) or would a splitter be optimal ?

A: Diversity receivers use 2 antennas, so for the SRc, best practice would be to use 2 for the receiver. As the SRc is not a true diversity receiver unless in ratio mode, it will not dramatically increase range in switch mode (the mode the SRc must be in to receive 2 channels). It's not recommended to use the same antenna for transmission and reception, so the IFB should be on a different antenna altogether.

Q: 6. are these antenna compatible with the XSW Band A iem?

A: The Sennheiser HALF WAVE DIPOLE Half-Wave Antenna Rods for EW-D EM Receiver are not intended for use with an IEM transmitter.

Q: 7. are These antennas compatible with Sennheiser G4 EW100 Receivers?

A: Yes, the Sennheiser HALF WAVE DIPOLE Half-Wave Antenna Rods for EW-D EM Receiver are also compatible with EW100 G4 receivers operating within the 470 to 550 MHz frequency range.

Q: 8. Does it work with SLX-D24D G58 and H55?

A: Yes, For G58 unit as the antenna is designed for a (470-542 MHz) No, for the H55 unit as it is designed based on a (H55: 514 to 558 MHz)

Q: 9. Can this antenna be use with two UA844+SWB connected to four QLXD4, and four ULXS4 receivers?

A: Yes, these antennas can be used with the UA844+ so long as the frequency range of the antennas cover the frequencies used on the systems.

Q: 10. what is the length or dimension of the antenna?

A: The Sennheiser HALF WAVE DIPOLE Half-Wave Antenna Rods for EW-D EM Receiver are 13.5" (344mm) long.