Capture dynamic motion shots and control your Waterbird multi-slider with precision using the PHOENIX RF Joystick Motion Controller from Waterbird. The RF wireless controller employs a convenient and user-friendly joystick to accurately control movement and direction. Ramp and speed functions, together with multiple position presets and settings for Ping Pong mode and pause time enable your slider to move exactly as you had envisioned for your specific project.

The PHOENIX  RF is compatible with the MS PRO, MS SWIFT S/X, and MS XL MKII and can save up to four preset positions. While there is a free Waterbird app that assists with basic slider functions, the PHOENIX RF enhances your overall production value with far more control and versatility. Connect the controller to your slider the integrated wireless transmitter or 4-pin XLR power and data connector.  Use the integrated battery to power the controller, although external 24-32V power may also be brought in using a separate 4-pin XLR input connector compatible with the 24V power supply. You can also power the controller using a 12V power brick using the standard barrel connector. Two 1/4" ports provide connectivity for two optional Waterbird PHOENIX Foot Pedal controllers, and a monochrome LCD screen provides important status information on multiple controller functions.

Works with Select Waterbird Sliders    Wireless Controller    Up to Four Preset Positions    Ping Pong Mode and Pause Time    Integrated Rechargeable Battery

• Buttons: nine industrial LED ring light buttons for ping-pong, init/stop, pedals, mem 1, mem 2, mem 3, mem 4
• Dials: ping-pong pause time, speed (slider maximum speed), and ramp (duration of slider ramp up or down)
• Monochrome LED display for viewing battery level, wireless link status, slider maximum speed, pause time, and ramp settings
• 360° rotation joystick
• Integrated battery and long range point to point wireless connection

• 4-pin locking XLR 24-32V power/data input
• 4-pin locking XLR 12V/24-32V power/data output
• 12V barrel power input
• Micro-USB service port
• Two 1/4" left and right foot pedals
• Two SMA wireless antenna connectors

Related Questions and Answers

Q: 1. I have never used a PTZ camera before. Can I somehow connect a AViPAS AV-1081 HDMI PTZ Camera to this and to an ATEM Mini switcher (via HDMI), to use this as one of three cameras connected to the ATEM Mini?

A: Yes, the following unit will worked connected VIA RS-232 and connect to BlackMagic atem mini via HDMI.

Q: 2. Does this controller allow you to control or adjust the pan speed? It looks so mechanical when using the remote

A: Yes it most certainly will be able to adjust the speed. Please see Page 5 for pan speed adjustment. https://bit.ly/3eM6MKl

Q: 3. Does this work with Birddog P120?

A: Yes, The FeelWorld KBC10 would be supported when using the Birddog P120 camera. The BD P120 supports the following control protocols provided by the Feelworld controller. Supported Control Protocols IP NDI Pelco-D RS-232 RS-422 VISCA

Q: 4. How do I connect multiple cameras to this single port unit?

A: That would depend on the cameras being used and how you need to wire them. Some options will require you to customize cables for use with the Green Phoenix connectors on the back or you may need to daisy chain RS-232 cables.

Q: 5. What's the difference to the PRO MK II?

A: The Waterbird MS PRO 120 Multi Slider Mark II (47") is 47" long and does not come with a separate controller. The Waterbird MS SWIFT X 200 Camera Slider with XL Motion Controller (79") is 79" long and comes with the XL Motion Controller.

Q: 6. Will this control the cameras using Ethernet?

A: Yes, it uses IP for control.

Q: 7. Is this controller now compatible with the M4P?

A: The DJI RC Motion 2 Controller for Avata is now compatible with the DJI Mini 4 Pro

Q: 8. Will this also work with the Mini Pro 3?

A: The DJI FPV Motion Controller is not compatible with the DJI Mini 3 Pro drone.

Q: 9. Will this support controlling a PTZOptics PTZ camera over IP?

A: Yes, the Datavideo RMC-2 Joystick Camera Controller should be able to control other camera brands that use VISCA over IP Protocol. PTZ Optics cameras will support this Protocol. However, we recommend using PTZOptics controllers with PTZOptics cameras because of their level of support if a setup problem does arise. PTZOptics PT-JOY-G4 IP/Serial Joystick Controller (4th Generation) BH #PTJOYG4 or PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller BH #PTSUPERJOYG1

Q: 10. Canon RC-IP100 Touchscreen PTZ Joystick Controller has the functionality of video switcher?

A: No, the Canon RC-IP100 Touchscreen PTZ Joystick Controller, will only function as a controller.