The V2Analog HD/SD-SDI to Analog Mini-Converter from AJA provides SDI digital to component/composite analog conversion at either HD or SD resolutions. It is ideal for integrating analog equipment such as monitors and tape decks into digital workflows. It utilizes a full 10-bit data path to ensure a high-quality conversion. Its low power consumption and compact size, makes it suitable for use on set or in AV installations integrating different signal types.

The V2Analog supports NTSC, PAL, 720p at 50/59.94/60 Hz, 1080i at 50/59.94/60 Hz, and 1080psf at 23.98/24/25 Hz. The converter accepts incoming digital SDI signals and converts them to analog YPbPr (SMPTE, EBU-N10), Betacam, or RGB component outputs, and NTSC/PAL or S-Video composite outputs. It is important to note that the V2Analog does not up-convert or down-convert between SD and HD resolution. Only digital to analog signal conversion is performed, therefore an HD-SDI signal will be output as an HD analog signal and won't be compatible with devices that only accept SD analog signals.

Configuration can be set on the unit itself using the DIP switches, or remotely with AJA's free MiniConfig software for Mac or PC over a USB 2.0 connection. The software provides an easy-to-use graphical interface with detailed information about input and output formats as well as all configuration parameters. A universal 5 VDC power supply comes included.

Please note: V2Analog does NOT up-convert or down-convert between SD and HD resolutions. Only digital to analog signal conversion is supported.

10-bit Digital to Analog Conversion    HD/SD-SDI Input    YPbPr/RGB Component or Composite Output    YPbPr, Betacam, or RGB Component Formats    NTSC or PAL Composite Formats    Full 10-Bit Data Path    Control via MiniConfig Software over USB    External DIP Switch Configuration    Low Power, Compact Size    Universal 5 VDC Power Supply Included

Related Questions and Answers

Q: 1. anyone know if this is compatible with an ultrastudio mini recorder? need to convert N64 composite for streaming via OBS. Thx!

A: This may not work if the signal is not NTSC broadcast standard frequency. We do not have direct experience.

Q: 2. Will this output to both HDMI and SDI at the same time? I am looking to record a computer's feed to an AJA IO4k via SDI while also passing the feed through to a projector via HDMI.

A: Simultaneous output through HDMI and SDI is possible.

Q: 3. Which converter is adequated to edit analog video from an old Sony PVW- 2800 & Panasonic AJ-D440P to a MacBook pro Retina?

A: You would actually need a capture device, not a simple converter, to ingest the footage from analog sources. If your MacBook Pro Retina has a Thunderbolt Connection the Blackmagic Design UltraStudio Express would be a great choice, B&H #BLUSEXPRESS. It has breakout cables that offer Composite, Component and S-Video inputs for older analog sources.

Q: 4. converters?

A: Converts SDI digital to component or composite with analog audio on 1/4 outs

Q: 5. will this unit upgrade the analog signal to 720 or 1080 sdi?

A: cannot change the resolution, 720 to 720 or 1080 to 1080

Q: 6. Filming with an ARRI sr2 - will this convert a film video tap to digital?

A: I would be a millionaire if I had a dollar for every foot of film I ran through Arriflex SR cameras. So while I have not tested this set up, the specs sound right. The Arri's video tap, possibly a Transvideo product, outputs a Composite signal through a BNC connection. Connect the tap to the converter and it should work just fine in making a digital signal.

Q: 7. Does this come with a power supply?

A: Yes. Power supply was in the box. New w/celophane...converter, power supply. No other cabling.

Q: 8. How do you set the deep switch for audio in and audio out

A: Please review pages 8 to 10 in the manual, which covers the dip switches to set for the audio channels you would like to output. See the link below: https://bhpho.to/3NPCxO6

Q: 9. Does the AJA ROI HDMI to SDI Mini Converter support SMPTE Level B for use with Black Magic gear?

A: According to AJA, The ROI family of mini-converters does not support SMPTE Level B 3G SDI output. SDI output of the ROI is specified as follows for the Video Output Tech Specs: (HD) 1920 x 1080p 50, 59.94, 60, SMPTE 425-1 Level A mapping structure 1 (4:2:2 10-bit YCbCr)

Q: 10. My SDI input is 1080p 29.97. Will this output S-Video?

A: No, it does not. use this one. Blackmagic Design Mini Converter SDI to Analog B&H # BLSDIAMC.