Mount your AV-2000 series PTZ camera onto the wall using this dark gray Wall Mount Bracket from AViPAS. This durable, heavy-duty steel bracket features cable slots on the bottom and on the wall side, so you can choose to pass them through underneath the camera or through the wall.

Eight holes on the wall side of this L-shaped bracket allow you to mount it onto the surface, and one center hole on the base side allows you to mount the PTZ camera using the included 1/4"-20 camera screw. A mounting hardware kit is included.

Mount AV-2000 Series PTZ Camera on Wall    Heavy-Duty 2.5mm Steel Wall Bracket    Multiple Slots for Cable Access    Mounting Hardware Kit Included    Comes in Dark Gray Color

AViPAS AV-2000 series PTZ camera

Related Questions and Answers

Q: 1. To use the sdi output is the power supply necessary? Or only with power supply via PoE

A: You should be able to use the SDI output however you power this unit.

Q: 2. Can you provide power to this camera through the Ethernet cable?

A: We're afraid not. This does not offer POE support.

Q: 3. Is the IR remote the only way to control it? Is other software included for control over LAN?

A: Along with the IR remote you will also be able to connect this camera to your network and control it with PTZOptics 4D IP Joystick Controller (GEN3), B&H # PTJOYG3. This camera and the remote use Visca over IP protocols.

Q: 4. if I need to install this camera like 100 ft far from my switcher and the controller wich cables do I need to add to my cart?

A: Kopul Premium Series 3G-SDI Cable (100 ft) BH #KOVBBC4100 • MFR #VBBC-4100 https://bhpho.to/3oyvJeO

Q: 5. can you imbed sound from an external source with this camera?

A: No you can not.

Q: 6. Can the LAN connection be used to do camera control and video output at the same time?

A: No the Lan output is only for IP video out the Control Interface is the 8-Pin Mini-DIN (RS-232)

Q: 7. Does the W in 1082W mean wide angle lens?

A: In this case the W means White. It is the White model of the 1082.

Q: 8. If I were to power off of a POE injector, what voltage does the camera need?

A: This AViPAS AV-1280 can be powered over POE 802.3af which would be about 15w. You could use this injector to power the camera https://bhpho.to/3p9Ri4R

Q: 9. Is 60fps the only frame rate available? Currently we're running all our cameras at 25fps

A: The AViPAS AV-1082G can be set to 5-30 fps.

Q: 10. Our camera is 75' from the platform. will this camer zoom that far without distortion?

A: I would consider a 20x or 30x PTZ camera based on the ranges that you work and need to zoom. https://bhpho.to/3LOVCiF