Expand your business's wireless network connectivity with the Cisco Meraki MR46 802.11ax 4 x 4 MU-MIMO Dual-Band Access Point. This indoor access point features a high-powered internal antenna that supports Wi-Fi 6 (802.11ax) with 4 x 4 MU-MIMO, delivering up to 3.5 Gb/s of total speed over the 2.4 GHz and 5 GHz signal frequencies for fast and reliable data connections with compatible devices. It connects to your compatible router or switch through its built-in 2.5G Ethernet port and operates using up to 30W of power-over-Ethernet (PoE). Alternatively, you can power the device by using a separate DC adapter to plug it into a wall outlet. With its plug-and-play design, the MR46 can be mounted onto a desktop, wall, or ceiling with the included hardware and operates without requiring additional hardware. The access automatically connects to the Meraki cloud service to download configuration information and updates. The wireless signal is secured with WEP and enterprise class WPA, WPA2, and WPA3 encryption.

4x4:4 MU-MIMO    3.5 Gb/s Dual-Radio Aggregate Frame Rate    Integrated Bluetooth LE Beacon & Radio    3-Year Enterprise License and Support

The MR46 features a high-powered internal antenna that supports 802.11ax Wi-Fi to deliver up to 1147 Mb/s speeds through the 2.4 GHz frequency signal and 2402 Mb/s over the 5 GHz signal for a combined speed of 3.5 Gb/s with compatible devices. Technologies such as beamforming and enhanced receive help to maintain reliable high-performance wireless connections.

With 4 x 4 MU-MIMO and OFDMA technologies, the access point can efficiently communicate with multiple devices simultaneously.

A dedicated dual-band scanning and security radio continually scans the environment for RF interference and potential wireless threats in real-time. The data is fed into the Meraki cloud, which works to automatically tune the channel selection, transmit power, and client connection settings for optimal performance.

Advanced security options such as AES hardware-based encryption and Enterprise authentication with 802.1X and Active Directory integration provide easy-to-configure security for users. Guests can be given isolated, internet-only access.

The QoS policies can be configured based on traffic type to help ensure that critical applications work efficiently. These include options to prioritize Wireless MultiMedia (WMM) access and optimize VoIP phones for smooth operation.

The MR46 automatically connects to Meraki cloud after it is plugged in to download its configuration and join your network. It also updates its firmware automatically to ensure that you always have the latest bug fixes, security updates, and features.

Track visitor numbers, dwell time, repeat visit rates, and other trends through the software dashboard for a deep analysis of your network traffic.

Related Questions and Answers

Q: 1. Is this working at any country without any issues or warnings?? Because my device that I have had bought from you alerting warning message "Your country is not supported", then I have had to change country to USA and then message disappeared.

A: This unit is intended for use in the United States. The country of use will need to be configured to ensure compliance with local regulations.

Q: 2. Can these units form a mesh network without being wired? That is, can they extend the network wirelessly?

A: Yes, the Ubiquiti Networks UniFi nanoHD 4x4 MU-MIMO 802.11ac Wave-2 Access Point (5-Pack) can form a mesh wirelessly. However for best results hard wiring back to the source would provide a more stable and reliable connection.

Q: 3. What's the range? How far does it broadcast?

A: The Ubiquiti Networks UniFi U6 Enterprise Wi-Fi 6E Tri-Band Access Point will cover a 1,500 ft² area so assuming there are no obstructions in the way of the signal.

Q: 4. Does it support VLANs?

A: Yes, the Ubiquiti Networks Dream Machine 4x4 MU-MIMO AC1733 Wave-2 Dual-Band Gigabit Access Point has VLAN support.

Q: 5. Does is support mesh?

A: The Ubiquiti Networks Dream Machine 4x4 MU-MIMO AC1733 Wave-2 Dual-Band Gigabit Access Point is compatible with UniFi mesh devices such as the U6 Mesh.

Q: 6. Is the light ring at the top on all the time? If so, is there a way to turn it off or dim it?

A: You can turn off the light in the settings for the Ubiquiti Networks Dream Machine BH #UBUDMUS.

Q: 7. Does this AP have a WebUI or does it need a Wireless controller to be managed?

A: Ubiquiti Networks UniFi U6 Enterprise Wi-Fi 6E Tri-Band Access Point requires a UniFi Network Application to be installed on a server or computer locally in order to facilitate online management of the device.

Q: 8. Can I still use my Eufy cameras that record 24x7 to Synology Surveillance Station?

A: Ubiquiti Networks Dream Machine 4x4 MU-MIMO AC1733 Wave-2 Dual-Band Gigabit Access Point (BH # UBUDMUS) will not support eufy cameras connected to a Synology Surveillance Station.

Q: 9. Are the 4 LAN ports POE?

A: No, the Ubiquiti Networks Dream Machine 4x4 MU-MIMO AC1733 Wave-2 Dual-Band Gigabit Access Point BH #UBUDMUS does not have PoE.

Q: 10. Can I use a PoE Injector to power this AP?

A: Yes, the Ubiquiti Networks UniFi U6 Enterprise Wi-Fi 6E Tri-Band Access Point can be powered via PoE injector. The Ubiquiti Networks U-POE-AT PoE+ Adapter (BH #UBUPOEAT • MFR #U-POE-AT) is the recommended injector to use as a power supply for the U6 Enterprise AP.