Stay connected to peripherals at a distance with the USB 2.0 Ranger 2304GE-LAN 4-Port Extender System from Icron. Capable of extending connectivity to 330' via Cat 5e, 6, and 7, the USB 2.0 Ranger 2304GE-LAN supports transfer speeds up to 480 Mb/s. Four USB-A female ports provide up to 600mA concurrently per port, or up to 1A when two or less ports are used at once. Pre-paired network configuration makes setup a breeze, while the included ExtremeUSB suite allows for transparent USB extension. This extender is plug and play; ExtremeUSB works with Windows, macOS, Linux, and Chrome OS.

Extends up to 330' via Cat 5e, 6 & 7    4 x USB-A 2.0 Ports    Supports Gigabit Ethernet    Supports 0.6 to 1A per USB Port    Pre-Paired Network Configuration    Includes ExtremeUSB Suite    Plug and Play

• Extends USB through Gigabit Ethernet
• Supports connections up to 330' via Cat 5e, 6, and 7 cables
• Supports USB 2.0 throughput up to 480 Mb/s
• Pre-paired networked configuration for simple installation
• Supplies up to 600mA at each USB port concurrently or up to 1A per port when two or less

  are used

This USB extender includes the ExtremeUSB suite, which features transparent USB extension and true plug-and-play functionality with no software drivers required. The ExtremeUSB Suite works with all major operating systems including Windows, macOS, Linux, and Chrome OS.

Related Questions and Answers

Q: 1. can this power the Unifi AC-IW? https://www.bhphotovideo.com/c/product/1296864-REG/ubiquiti_networks_uap_ac_iw_us_uap_ac_iw_unifi_access_point.html

A: Yes. The Ubiquiti Networks 48V PoE Adapter B&H # UBPOE4824W will power the Ubiquiti Networks UAP-AC-IW-US UniFi Access Point Enterprise Wi-Fi System BH #UBUAPACIWUS.

Q: 2. what's the difference between standard and the one with Gigabit LAN port. I don't see any extra ports in the picture for the latter?

A: The standard is up to 10/100 Mbps and this one is up to 1Gbps.

Q: 3. Will this work to power the NS5ACL 24v passive POE

A: Yes however it does not support gigabit speeds. If you need that you should purchase the B&H# UBPOE2412WG

Q: 4. Will this work with Speco O2VLB8 IP camera?

A: No, this Ubiquiti POE injector will not work with the Speco camera.

Q: 5. Is this PoE+ or Passive?

A: It is 48 Volts, so it is PoE+ Passive is 24 Volts

Q: 6. Is this the right POE adapter for the Reolink RLC-410?

A: Robert is correct. No, this will not work. This is a 24VDC passive POE adapter. Reolink cameras require a IEEE 802.3af or IEEE 802.3at (48VDC) active POE injector. Consider this one: TP-Link TL-POE150S Power Over Ethernet Injector B&H # TPTLPOE150S: https://bhpho.to/3qW24K1 IEEE 802.3, 3u, 3af Compliant 1 x 10/100/1000M LAN Port 1 x Power Socket (DC IN) 1 x 10/100/1000M PoE Port Power LED Indicator

Q: 7. Will this work with Avaya IP desk phones?

A: That would depend on the model of the Avaya Phone.

Q: 8. Can you tell me if the protocol remains between Tx and rx. Eg if I insert 1080i hdmi at the Tx, will it arrive at the hdmi out on the receiver end as 1080i ?

A: Yes, if you are sending a 1080i signal it should arrive at the output end as the same. That is what we are sending to our outputs and the quality on the monitors is indeed the same as we sent. I will caution you, however, if you are sending the signal 200 feet or more, be aware that you may experience occasional signal loss when powering up. We have found that if we turn the extender off and then back on it will usually pick the further outputs up after a try or two.

Q: 9. Is this the right POE adapter for the AC PRO? I see a different voltage.

A: Yes. This PoE adapter is fully compatible with the Ubiquiti UAP-AC-PROUniFi Access Point Enterprise Wi-Fi Syste.

Q: 10. Will this work with the PTZ Optics NDI-HX cameras?

A: The Ubiquiti Networks POE-24-12W-WH PoE Injector (24 VDC, 12W, White) BH #UBPOE2412WWH is purpose-built for Ubiquiti cameras and would not be recommended for PTZ Optics NDI-HX cameras.