Connect your 5G Panel Antenna to your Ghost-Eye transmitter or receiver with this Panel Antenna Connection Cable from CINEGEARS. This is a single cable that connects to one of the RP-SMA connectors on your TX or RX unit, and the other end connects to one of the panel connectors using a right-angle connector.

For Ghost-Eye 5G Panel Antenna    1 x RP-SMA Connection Cable    Connects Panel to Wireless TX or RX    Right-Angle Connector on Panel Side

Related Questions and Answers

Q: 1. I have bought a used Sennheiser K6/ME66 mic from Amazon and purchased KA 600i from B&H. Now on testing on a simple recorder/iphone/laptop it doesn't work. I intent to order Sony PCM M10 and record bird sounds using the Mic. I may also connect the Mic to my DSLR for recording. I have now ordered a Hosatech XVM 105F cable. What cables would work for the intended setup and give balanced output to both L&R?

A: The KA-600i is designed for use with smartphones and will not make the proper connection with a standard mic input on recorder or DSLR. Sennheiser offers the standard KA-600 for these applications. In addition when using either adapter cable you must use a battery to power the K6 module.

Q: 2. Does this cable legal for in-wall wiring?

A: No. Samsung has a specific One Connect cable for in-wall use and it is BH #SAVGSOCR86U

Q: 3. Hi! I would like to use this with an AVX microport receiver connected to an iPhone (acting as recorder). This haven't worked so far. The AVX puts out the max four bar level. What is the problem?

A: This adapter works with every iPod I have going back to one made in 2008. Audio levels are consistently good. I'll bump up the audio in post production at times. Use a dynamic with a hotter output (I use a Shure SM 63 or VP 64) to get higher input levels on your recordings.

Q: 4. What are the dimensions of the connector for the one connect box?

A: TV Plug Size: 1.77 x 0.38 x 3.34" OneConnect Plug Size: 0.99 x 0.54 x 2.76"

Q: 5. Is this for the ghost eye 600?

A: Yes, this is compatible with the Ghost Eye 600m according to Cinegears.

Q: 6. Does anyone have direct experience with this the KA 600i working with an iPhone 11 Pro? iPhone 11 Pro to XLR Mic?

A: You will need to use the adapter below to plug this into your iPhone 11. https://www.bhphotovideo.com/c/product/1280795-REG/apple_mmx62am_a_lightning_to_3_5mm_headphone.html?sts=pi-ps&pim=Y

Q: 7. Will these work on the CINEGEARS Ghost-Eye 150M?

A: Yes, the CINEGEARS Paddle Antenna for Ghost-Eye 150M & 300M Wireless Video Transmission Systems can connect to the CINEGEARS Ghost-Eye 150M Wireless HDMI & SDI Video Transmission Kit through the RP-SMA connectors.

Q: 8. Will this give the proper output level from a mixing console line level aux output to an iOS input?

A: The Sennheiser KA600i is not designed to connect line level devices to a smartphone. A hardware interface would be recommended for this application.

Q: 9. Is this compatible with UN55LS03N ((2018 Frame TV)?

A: Yes it is : COMPATIBLE PRODUCTS: QN65LS03RAFXZA QN55LS03RAFXZA QN49LS03RAFXZA QN43LS03RAFXZA QN75Q90RAFXZA QN65Q90RAFXZA

Q: 10. What is the pinout on this minijack ?

A: This is a phone connector. I use this to connect my Lapel mic to my iPhone and it works good. You can search for 3.5 mm 4-conductor TRRS phone connector , it will give you all the details of the pin out. Hope this helpsAmar