The Ambient Recording LTC-OUT35/35F TC-OUT Cable with LEMO 5-Pin to 90 Degrees + Jack is used to feed microphone and time code into a DSLR camera. The unit contains a 7.87" microphone cable to connect to the left channel and a 15.75" time code cable to connect to the right channel.

7.87" Microphone Cable    15.75" Time Code Cable

Related Questions and Answers

Q: 1. Would this 3 Pin Lemo work with the Wisycom MTP40S transmitter?

A: Yes, the Ambient Recording AK-XLR3F-L3 Balanced 3-Pin XLR Female to 3-Pin LEMO Adapter Cable can be used with the Wisycom MTP40S Wireless Bodypack Transmitter

Q: 2. Will this cable work to jam to a Deity TC-1 box? Same thing, just the Deity?

A: Yes but it is recommended that you use the Deity Microphones C14 instead because of the threaded locking connector.

Q: 3. Will this allow me to jam timecode from a BNC output into a LEMO input?

A: Yes it should. This is a BNC to LEMO 5-Pin Input Cable for Time Code.

Q: 4. Will this cable work with the Komodo X for Timecode?

A: Instead of the Ambient Recording Lockit LEMO 5-Pin to 9-Pin Timecode and Sync Cable for Red Komodo (16"), RED recommends the RED DIGITAL CINEMA EXT-to-Timecode Cable (3') for timecode on the RED DIGITAL CINEMA KOMODO-X 6K Digital Cinema Camera (Canon RF, Black).

Q: 5. Based on the direction of the tentacle, is this version a female 5-pin LEMO? I'm hoping to use to power my nucleus nano from my handle

A: The LEMO connection on this cable is is male, and it is designed for time code to be sent from a Tenacle Sync TC generator to a device with 5-Pin female TC in.

Q: 6. Would this work well for connecting a Zoom F6 to a LECTROSONICS DCHT DIGITAL CAMERA HOP TRANSMITTER via the Zoom F6's line out port?

A: No. The Timecode Systems LEMO 5-Pin to 90 Degree 3.5mm Mini Jack Cable for DSLR Camera is not compatible for use with the Lectrosonics DCHT transmitter. The DCHT transmitter has a TA6F (XLR 6-pin female) locking input connector, not LEMO 5-pin.

Q: 7. Will this work with the Sony DWT-B03R transmitter?

A: Yes, the Ambient Recording Balanced 3-Pin XLR Female to 3-Pin LEMO Adapter Cable is compatible for use with the Sony DWT-B03R Digital Wireless Bodypack Transmitter.

Q: 8. Dose this work with Alexa Mini?

A: This will be compatible with the Alexa Mini.

Q: 9. hi does this work for red dsmc2 production module?

A: Yes, the Ambient Recording TC-SYNC Timecode and Sync Cable for Master Lockit & Lockit Compact Devices could be used to send timecode and genlock information into the RED DIGITAL CINEMA DSMC2 Production Module from a compatible 5-Pin Lemo source such as the Ambient Master Lockit.

Q: 10. I’m confused if this is the cable to jam sync a Tentacle with a Sound Devices 633, or is it the C02?

A: The two cables are directional so it depends on which device you are using to generate timecode and which is receiving timecode. You'll see an arrow on the white band near the 3.5mm connector that shows the direction of signal flow for each cable. The C03 is for sending timecode from the 633 into a Tentacle Sync and the C02 is for sending timecode from a Tentacle Sync into the 633.