The 23.6" Ambient Recording TC-IN/Epic 3-Pin XLR Female to 4-Pin LEMO 00 Series Timecode Input Cable is specifically designed for timecode applications and features a green XLR ID ring for easy identification in the field.

Designed for Timecode Applications    Green XLR Ring for Easy Identification

Related Questions and Answers

Q: 1. How long is the cable? Do they make one that is 4' or longer?

A: This cable is only 18 in length. There are longer cables however, such as the Laird Digital Cinema 4-Pin Lemo to 4-Pin XLR Power Cable for Teradek Cubes (6'/1.83 m)

Q: 2. Could I use this cable to sync timecode from my Atomos Shogun (that has a LEMO port) out to my Sound Devices MixPre-3 via the MixPre-3's Aux-in port? I have a Sony A7III that's generating the timecode out to the Shogun. So, essentially, this cable would connect to the Atomos Shogun's LEMO port and the Shogun would be sending the timecode out to the MixPre-3's 3.5mm AUX-IN. And if so, will recording be triggered from camera, to shogun, to the mixpre? I know the Sony will trigger the shogun, but can the shogun trigger the mixpre with the aforementioned setup? Thanks!

A: This cable is not appropriate for the Shogun and MixPre. To connect the Shogun to the MixPre, you would want to connect the HDMI output of the Shogun to the Micro-HDMI connection on the MixPre. This will take the HDMI TC from the Sony to the recorder. The MixPre must be set in HDMI TC Mode and will stop and start recording from the camera triggering it.

Q: 3. Is the 4pin lemo connection male or female?

A: The DigitalFoto Solution Limited 4-Pin LEMO to BNC Timecode Synchronization Cable for RED EPIC (1.6') LEMO is male.

Q: 4. Can I use this cable to jam my Denecke SB-3 with my Sound Devices 788T?

A: No this is for iOS devices. You need the single ring 1/8 connector. You need to cables to do it. This one a href= http://www.bhphotovideo.com/c/search?Ntt=laird+digital+cinema+sd-tcd2-01&N=0&InitialSearch=yes&sts=ps target= _blank http://www.bhphotovideo.com/c/search?Ntt=laird+digital+cinema+sd-tcd2-01&N=0&InitialSearch=yes&sts=ps/a and this one. a href= http://www.bhphotovideo.com/c/product/889382-REG/psc_fpsc1082_1_bnc_1_8_mini.html target= _blank http://www.bhphotovideo.com/c/product/889382-REG/psc_fpsc1082_1_bnc_1_8_mini.html/aThats how we did it.

Q: 5. Would this 3 Pin Lemo work with the Wisycom MTP40S transmitter?

A: Yes, the Ambient Recording AK-XLR3F-L3 Balanced 3-Pin XLR Female to 3-Pin LEMO Adapter Cable can be used with the Wisycom MTP40S Wireless Bodypack Transmitter

Q: 6. Will this cable work to jam to a Deity TC-1 box? Same thing, just the Deity?

A: Yes but it is recommended that you use the Deity Microphones C14 instead because of the threaded locking connector.

Q: 7. hi does this work for red dsmc2 production module?

A: Yes, the Ambient Recording TC-SYNC Timecode and Sync Cable for Master Lockit & Lockit Compact Devices could be used to send timecode and genlock information into the RED DIGITAL CINEMA DSMC2 Production Module from a compatible 5-Pin Lemo source such as the Ambient Master Lockit.

Q: 8. Is this wired properly to feed a line level to the Alexa Mini audio in?

A: This cable is designed for timecode use only and for connection to smartphones.

Q: 9. Will this allow me to jam timecode from a BNC output into a LEMO input?

A: Yes it should. This is a BNC to LEMO 5-Pin Input Cable for Time Code.

Q: 10. Can I use this cable to feed time code from a Sound Devices 633 or 702T into the mic in on my Canon 5D mkii?

A: The cable will give you TC out of the SD machines, but I do not believe that the 5D can jam sync internal TC in the camera through a mic input with an AGC. Use a TC slate (Movieslate on an iPad?) which you can jam to the SD machines using this cable, show the camera the slate when you roll, and this will get you close enough to sync double system .wav files in post.