The extra-small, chroma key blue Bubblebee Industries The Spacer Bubble System is a multipiece, adaptable windshield system for small-diaphragm microphones that allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 18 to 24mm in diameter and has an inner depth of 55mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 18 to 24mm in Diameter    55mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

• Sennheiser: ME 64, MKH 8050, K6
• Shoeps: CMC Series
• DPA: 4006, 4011
• Audio-Technica: AT-4053
• Rode: NT55
• Sony: ECM-MS2
• Audix: SCX1C

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet, simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• Practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

• The combination of the foam and mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

Related Questions and Answers

Q: 1. Is there any way to switch out the cable to use with a mid-side mic like the Sanken CMS-50? Do you sell such a cable?

A: Yes, you can replace the cable that is included with the Rycote 010320 Super-Shield Kit for Shotgun Mics (Small). The Sanken CMS-50 Short M-S Stereo Shotgun Microphone has a 5-pin XLR output connector which requires a Y-cable that splits to two 3-pin XLR male connectors like the Sanken SC-532 5-Pin XLR Female to Dual 3-Pin XLR Male Adapter Y-Cable - 1' (B&H # SASC532), the Remote Audio 5-Pin Stereo XLR Female to Dual XLR Male Y-Cable - 18" (B&H # RECAXSTE), or the Sennheiser ACS5 5-pin XLR Female to Dual XLR Male Y Cable for MKH418S and MKE44P Microphones -6" (B&H # SEACS5). You can also make a custom cable yourself or have one made for you with the appropriate connector to fit the windshield and pistol grip.

Q: 2. Hi Works with MKH 8060 +MZF 8000 filter? Thanks!!! Renzo

A: No, The Rycote 010320 Super-Shield Kit for Shotgun Mics (Small) is for shotgun microphones up to 200mm long and it will not be able to accommodate the Sennheiser MKH 8060 when combined with the Sennheiser MZF 8000. The MKH 8060 is 178mm long and the MZF 8000 is 29mm long, which is 207mm when used together. Instead of the small Rycote Super-Shield, you can use the Rycote 010321 Super-Shield Kit for Shotgun Mics - Medium (B&H # RYSSKM) which accommodates mics that are 200 to 250mm long.

Q: 3. Does it work for sennheiser mke600? If not, which one do you have that does fit it?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics will fit mics with a diameter of 18 to 24mm, and the Sennheiser MKE 600 has a diameter of 20mm.

Q: 4. Can this screw onto a boom pole? If so, what are the thread specs?

A: Yes, the Blimp can be attached to a boompole, threading size is 3/8"

Q: 5. this is good for MKE 600I still have ME67ME66What else do I need to purchase?It can be applied

A: To clarify: Modular 5 will accommodate only the MKE 600 and ME 66; Modular 7 will accommodate all three, but is larger than required for the MKE 600 in particular.

Q: 6. How does this blimp compare with the rycote windshield kit 4? Looks like the only real difference is that the the super-shield does not have a real connbox. Need help picking one, thanks!

A: The Rycote Super-Shield Kits are a great cost effective solutions for heavy wind diffusion, but don't offer the same modular customization available on the windshield kits(4).

Q: 7. I have the Rode NTG3B which is 10 inches. Should I get the medium or large for the Rycote Super-Shield Kit for Shotgun Mics. Which one would fit better?

A: RYSSKM is directly compatible with the Rode NTG3B.

Q: 8. Would this Super-Shield be too large for the DPA 4018B?

A: This windshield kit should be compatible with this version of the 4018, https://www.bhphotovideo.com/c/product/1050594-REG/dpa_microphones_4018a_full_size_super_cardioid.html. Any other version may be too small.

Q: 9. will the new rode ntg5 fit?

A: Yes, it will fit the NTG-5, and Rycote also make a blimp specifically for that mic: https://www.bhphotovideo.com/c/product/1544185-REG/rycote_010326_super_blimp_windshield_kit_for.html

Q: 10. I would like to remove the handle from this and mount it to a camera cage with a 3/8-16 or 1/4-20 screw. Would that be feasible by threading it through the hole the handle clamp screws through?

A: No problem grippper will attach to your rig as long as you have a 3/8 thread