Power your RT MDR.S Lens Control Receiver from a separately available power source with this 3-Pin to 3-Pin R/S Power Cable from Teradek. The cable features a 3-pin connector on one end for the MDR.S and a 3-pin with ARRI run/stop trigger on the other end to plug into a separately available power source. The cable measures 15.7" in length.

Power your MDR.S Receiver    3-Pin Connector on MDR.S End    3-Pin R/S Connector on Other End    Cable Measures 15.7" in Length

Related Questions and Answers

Q: 1. Is this adapter threaded on the female end?

A: The female end is an non-threaded 5/8" female receiver.

Q: 2. Can this power the FIZ motor directly, or is the Nucleus controller required as well?

A: The PORTKEYS 5-Pin BM5 to 7-Pin Control Cable for Tilta Nucleus-M (15.7") (B&H# POTILTANMCC) is a control cable. It does not provide power.

Q: 3. Does this cable and the SmallRig battery plate 2504 also work with the 6K Pro?

A: Yes, this will work on the Pro.

Q: 4. Can this be used with a Panasonic G85?

A: No, the Tilta DMW-BLF19 Dummy Battery to 3-Pin Fischer Power Cable (14") is not compatible with the Panasonic Lumix DMC-G85 Mirrorless Micro Four Thirds Digital Camera (Body Only), BH #PADMCG85. I recommend using a DMW-BLC12 dummy battery like the GyroVu USB to Panasonic DMW-BLC12 Dummy Battery Cable for GH2 (40"), BH #GYGVUSBGH2 instead.

Q: 5. I have the nano now with the port keys bm5 touch screen and this cable. Would it act like an auto focus with a manual lens?

A: This cable will allow you to focus manual lenses controlled by the Nucleus Nano using the BM5 touch screen. You will be able to touch an area of the screen and the Nucleus motors will pull focus to the area of your choice.

Q: 6. What is minimum and maximum length of the cable?

A: The minimum length of the cable is 1ft, and the maximum length is 3ft.

Q: 7. Is the 2 pin connector a standard power connector? Will it connect to a Zcam E2-S6?

A: The SmallRig 2.5mm DC Barrel to 2-Pin Power Cable for BMPCC 6K/4K would only support the Black Magic Pocket Camera series.

Q: 8. hello... I have a SmallHD 703 monitor and a CTL.1 focus controller, with the Teradek 5-pin to micro USB 2.0 type B I can have the lens data

A: The Teradek 5-Pin to Micro-USB 2.0 Type-B Monitor Cable for SmallHD Overlays (16") (B&H# TE111472) will connect a CTRL.1 or CTRL.3 controller to a FOCUS Bolt or CINE 7 receiver. If you have those, and are running PagesOS 3, then it may be used. In case you need the PagesOS 3 update: https://bit.ly/3XUEoXY

Q: 9. Will this cable also work with the Portkeys BM7 ii DS monitor? I believe the motor control port is the same as on the BM5 WR.

A: The 5-pin focus puller port on the PORTKEYS BM7 II DS 7" High-Bright Monitor with Wireless Camera Control is compatible with the PORTKEYS 5-Pin BM5 to Micro-USB Control Cable for Tilta Nucleus-Nano (15.7").

Q: 10. Cable looks like it could work with bmpcc 6k can it trigger record on bmpccs through nucleus m handle and motor?

A: No, the BMPCC 6K has a 2-pin connection, so the cable will not connect to the camera. This cable is just to connect the PORTKEYS monitor to the Nucleus-M.